|
THE STANDARDIZATION MARKS (PERMITS AND FEES) REGULATIONS
ARRANGEMENT OF REGULATIONS
3. |
Application for permits
|
7. |
Samples and information
|
11. |
Suspension and revocation of permits
|
SCHEDULES
THE STANDARDIZATION MARKS (PERMITS AND FEES) REGULATIONS
1. |
Citation
These Regulations may be cited as the Standardization Marks (Permits and Fees) Regulations.
|
2. |
Interpretation
In these Regulations, unless the context otherwise requires—
“inspection” includes the process of examination and conducting of relevant tests by the Bureau to determine the conformity of any commodity with Kenya Standards;
“Kenya standards” means standard specifications of any commodity approved by the council as the applicable standard for that particular commodity;
“permit-holder” means a person who has been granted a permit to use a standardization mark under the Act or under these Regulations.
|
3. |
Application for permits
Applications for the issue or renewal of a permit shall be in the Form STA/1 in the Schedule to these Regulations.
|
4. |
Permits
(1) |
A permit issued by the Bureau shall be in Form STA/2 in the Schedule to these Regulations.
|
(2) |
Permits shall be issued subject to the conditions set out in Form STA/2 in the Schedule to these Regulations.
|
|
5. |
Use of permits
After a permit has been issued by the Bureau or a person acting under its authority, the standardization mark in respect of which a permit has been issued shall be applied by the permit-holder to all commodities which comply with the requirements set forth in the applicable Kenya Standards.
|
6. |
Tests and inspections
(1) |
Before issuing a permit to any applicant, the Bureau may carry out such tests and inspect any commodity for the purposes of ascertaining whether the commodity complies with the requirements set forth in the applicable Kenya standards.
|
(2) |
The Bureau may carry out such periodic tests and inspections as it may deem necessary in order to ascertain whether a permit-holder is complying with the general scheme of supervision and control laid down by the Bureau for every commodity or class of commodities.
|
|
7. |
Samples and information
(1) |
Where a person has been requested, in writing by the Director to furnish samples of any commodity or information in regard to its manufacture, production, processing or treatment, he shall do so within such period as may be specified in the request.
|
(2) |
Any person who fails to comply with a request made under this regulation shall be guilty of an offence and liable to a fine not exceeding six thousand shillings or to imprisonment for a term not exceeding six months, or to both such fine and imprisonment.
|
|
8. |
Fees
(1) |
Every applicant for the issue of a permit shall pay, at the time of filling the application, a fee of one hundred shillings for each application made by him.
|
(2) |
Every permit-holder shall pay an annual fee of fifty shillings in respect of each permit granted to him or renewed.
|
(3) |
Every permit-holder shall pay a marking fee proportionate to the quantum of the annual production of the commodity in respect of which the permit has been granted; except that the Bureau may at any time vary or change the marking fee payable in respect of any commodity.
|
|
9. |
Layout markings
(1) |
Every permit-holder shall be assigned an identification number by the Bureau, which number shall, for the purposes of identifying the permit-holder, appear on all commodities on which a standardization mark has been applied.
|
(2) |
In addition to the Standardization mark, all commodities which the permit-holder produces or manufactures shall carry such other marks as the Bureau may from to time determine.
|
(3) |
All the markings on any commodity shall be applied in the manner specified by the Bureau.
|
|
10. |
Register
(1) |
The Bureau shall keep a register of all permit-holders and the products in respect of which a permit has been issued.
|
(2) |
Any person may apply, in writing and on payment of a fee of twenty shillings, for any information contained in the register:
Provided that the Bureau shall supply or refuse to supply the information so requested.
|
|
11. |
Suspension and revocation of permits
(1) |
The Director or any other officer authorized by the Bureau may suspend or revoke a permit—
(a) |
if it is ascertained that the permit-holder has used the standardization mark on or in connexion with commodities which do not comply with the requirements set forth in the applicable Kenya Standards; or
|
(b) |
if any of the fees specified in regulation 8 of these Regulations have not been paid; or
|
(c) |
the permit-holder is adjudged bankrupt; or
|
(d) |
the permit-holder transfers his business to another person; or
|
(e) |
the Kenya standards on which the issue of the permit was based are withdrawn by the Bureau.
|
|
(2) |
A permit-holder who is notified that his permit has been suspended or revoked in accordance with the provisions of subregulation (1) of this Regulation, shall, on receipt of the notification of the suspension or revocation, stop applying the standardization mark to any commodity.
|
(3) |
Where a permit has been revoked or suspended in accordance with the provisions of subregulation (1) of this Regulation, the Director or any other officer authorized by the Bureau may require the permit-holder to remove the standardization mark from all the commodities on which he has applied the standardization mark.
|
(4) |
Any person who fails to comply with the provisions of sub-regulations (2) and (3) of this regulation shall be guilty of an offence and liable, on summary conviction, to a fine not exceeding six thousand shillings or to imprisonment for a term not exceeding six months or to both such fine and imprisonment.
|
|
12. |
Permits Committee
(1) |
There shall be established a committee called the Permits Committee which shall be responsible for the administration of the standardization marks scheme.
|
(2) |
The Permits Committee shall, subject to subregulation (3) of this regulation, consist of the following members—
(a) |
a chairperson who shall be the Director of the Bureau;
|
(b) |
a secretary who shall be the person in charge of the certification Marking Scheme of the Bureau;
|
(c) |
two members nominated by the council, one of whom shall act as chairperson in the absence of the chairperson.
|
|
(3) |
The chairperson of the Permits committee may, after consultation with the committee, appoint not more than two persons, one of whom shall be the chairperson of the relevant Industrial Standards Committee, to be additional members of the committee being person whose assistance or advice the committee may from time to time require.
|
|
SCHEDULE
FORM STA/1
|
(r. 3)
|
APPLICATION FOR *GRANT/RENEWAL OF A PERMIT TO USE A STANDARDIZATION MARK
|
To:
The Secretary to the Permits Committee.
Kenya Bureau of Standards,
P.O. Box 10610,
Nairobi.
*I/We the undersigned hereby apply for the *grant/renewal of a *permit/the permit No........................... to use the standardization mark on the commodity specified hereunder:—
(1)
|
(2)
|
(3)
|
Standardization Mark
|
Description of the commodity upon and in respect of which the standardization Mark is to be used
|
Trade Mark or Brand which is in use in respect of the commodity
|
In connection with this application, I/we the undersigned hereby declare that the commodity referred to in column 2 above and the process and practice which is or will be carried out by "me/us in the production of the commodity shall at all times comply with standard specification bearing tittle..........................................................................................................Date ....................................................... Signature of the applicant
|
In connexion with this application, *I/We the undersigned hereby declare that the commodity referred to in column 2 above and the process and practice which is or will be carried out by *me/us in the production of the commodity shall at all times comply with standard specification bearing title ......................................
Date ........................ Signature of the applicant .................
Name ..............................
Designation ......................
Name of firm ......................
Address ..........................
To be submitted in triplicate.
*Delete whichever is not applicable.
FORM STA/2
|
(r. 4)
|
PERMIT TO USE THE STANDARDIZATION MARK
|
Permit No........................
Permit is hereby granted to .................. of ................... to use the standardization mark specified in the first column of the Appendix hereunder, upon and in respect of the commodity specified in the second column thereof, which commodity conforms to the standard specification in the third column.
Appendix
|
(1)
|
(2)
|
(3)
|
Standardization Mark
|
Description of the commodity upon which the standardization Mark is to be used
|
Standard specification
|
Permit effective from ..............................
Permit expires on ..................................
Date of issue ..............................
........
Fees paid ...........................................
1. |
This permit is issued subject to the following conditions:—
(a) |
The permit-holder shall comply with the general and specific conditions and scheme of supervision and control which the Bureau may issue from time to time.
|
(b) |
This permit is not transferable.
|
(c) |
Costs incurred by inspection to determine whether commodities to which the standardization mark has been applied fulfil the applicable requirement set forth by the Bureau shall be defrayed by the permit-holder to the extent specified in the scheme of supervision and control for the commodities listed in the permit.
|
(d) |
The right to use the mark applies only to the commodities listed in the permit.
|
(e) |
Costs incurred in applying the standardization mark shall be defrayed by the permit-holder.
|
(f) |
The Bureau reserves the right to revise the regulations for marking standardized commodities.
|
(g) |
If the Kenya standards on which the permit is based are revised, this permit shall be valid only if the permit-holder agrees to comply with the requirements set forth in the revised Kenya standards.
|
(h) |
This permit shall be valid for a period of one year from the date of issue unless earlier suspended or revoked.
|
|
2. |
The breach of any of the conditions contained in this permit constitutes an offence under the provisions of the Standards Act and the Standardization Marks (Permits and Fees) Regulations, 1977.
|
............................
Director/Authorized Officer.
THE STANDARDS-THE STANDARDS ORDER
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use these methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Table of Kenya Standard Specification
|
KS 01-136: 1980
|
Kenya Standard Specification for grades of Wheat Grain.
|
KS 03- 85: 1979
|
Kenya Standard Specification for Aluminium Sulphate.
|
KS 03- 86: 1979
|
Kenya Standard Specification for Sulphuric Acid.
|
KS 03- 87: 1980
|
Kenya Standard Specification for Hydrochloric Acid.
|
KS 03- 88: 1979
|
Kenya Standard Specification for Distilled Water.
|
KS 03- 89: 1980
|
Kenya Standard Specification for School Chalks.
|
KS 03-156: 1980
|
Kenya Standard Specification for Caustic Soda, Pure and Technical.
|
KS 03-159: 1979
|
Kenya Standard Specification for Zinc Oxide for Paints.
|
KS 03-160: 1979
|
Kenya Standard Specification for Whiting for Paints.
|
KS 03-242: 1980
|
Kenya Standard Specification for Sulphuric Acid for use in Lead-Acid Batteries.
|
KS 03-243: 1980
|
Kenya Standard Specification for PVC (Vinyl) Asbestos Floor Tiles.
|
KS 04-179: 1979
|
Kenya Standard Specification for Rigid PVC Conduits and Fittings for Electrical Wiring Part 1-Conduits.
|
KS 04-180: 1980
|
Kenya Standard Specification for Metallic Conduits’ and Fittings for Electrical Installation Part 1- Conduits.
|
KS 04-182: 1980
|
Kenya Standard Specification for Low-Voltage Condactors.
|
KS 04-187: 1979
|
Kenya Standard Specification for Conductors for Insulated Cable.
|
KS 04-189: 1979
|
Kenya Standard Specification for Aluminum Stranded Conductors for Overhead Power Lines.
|
KS 04-190: 1979
|
Kenya Standard Specification for Stranded Aluminum Conductors Steel Reinforced for Over head Power Lines.
|
KS 04-191: 1979
|
Kenya Standard Specification for Flame Retardant Characteristics for Electric Cables.
|
KS 04-194: 1980
|
Kenya Standard Specification for PVC Insulate Conduits for Electricity Supply.
|
KS 05-139: 1980
|
Kenya Standard Specification for Jams, Jellies and Mamalades.
|
KS 05-168: 1979
|
Kenya Standard Specification for Milled Maize Products.
|
KS 05-169: 1979
|
Kenya Standard Specification for Wheat Flour.
|
KS 05-172: 1979
|
Kenya Standard Specification for Bread.
|
KS 05-227: 1980
|
Kenya Standard Specification for Cashew Kernels.
|
KS 09-241: 1980
|
Kenya Standard Specification for Biscuits.
|
KS 06-150: 1980
|
Kenya Standard Specification for New Pneumatic Tyres for Vehicles other than Passenger Cars.
|
KS 06-151: 1979
|
Kenya Standard Specification for Machetes (Pangas).
|
KS 06-152: 1980
|
Kenya Standard Specification for Garden Rakes.
|
KS 06-187: 1979
|
Kenya Standard Specification for Jembes.
|
KS 06-204: 1980
|
Kenya Standard Specification for Forks, Shovels and Spades.
|
KS 06-205: 1979
|
Kenya Standard Specification for Retreaded Tyres.
|
KS 08-114: 1979
|
Kenya Standard Specification for Cotton Bed Sheets.
|
KS 08-117: 1979
|
Kenya Standard Specification for Blankets-Part 1.
|
KS 03-157: 1980
|
Kenya Standard Specification for MAP and DAP Fertilizers.
|
KS 03-158: 1980
|
Kenya Standard Specification for Compound Fertilizers.
|
KS 03-287: 1980
|
Kenya Standard Specification for Ammonium Sulphate (Sulphate of Ammonia) Fertilizer Grade.
|
KS 03-289: 1980
|
Kenya Standard Specification for Unbacked Flexible PVC Floor Covering.
|
THE STANDARDS-THE STANDARDS ORDER, 1982
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
KS 03- 44: 1981
|
Kenya Standard Specification for Toilet Soaps (1st Revision).
|
KS 03- 92: 1980
|
Kenya Standard Specification for Detergent Powders for Household Use.
|
KS 08- 119: 1981
|
Kenya Standard Methods for Determination of Breaking Load and Elongation (Strip Method) of Woven Fabric.
|
KS 08- 120: 1981
|
Kenya Standard Methods for Determination of Mass per Unit Length and Mass Per Unit Area of Woven or Knitted Fabrics.
|
KS 08- 121: 1981
|
Kenya Standard Method for Determination of Threads per Centimetre of Woven Fabrics.
|
KS 08- 133: 1980
|
Kenya Standard Specification for Woven Bags (Natural Fibres) for Milled Products.
|
KS 08- 134: 1980
|
Kenya Standard Specification for Woven Bags (Natural Fibres) for Sugar.
|
KS 04- 148: 1980
|
Kenya Standard on Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and similar General Use.
|
KS 06- 149: 1981
|
Kenya Standard Specification for PVC Pipes for Water Services.
|
KS 06- 153 : 1981
|
Kenya Standard Specification for General Purpose Wheel barrows.
|
KS 03- 163: 1981
|
Kenya Standard Specification for Colours for Ready Mixed Paints.
|
KS 04- 177: 1981
|
Kenya Standard Graphical Symbols Used in Electrotechnology;Part 3: Symbols for Electrical Installation Diagrams in Buildings.Part 4: Measuring Instruments and Electric Clocks.Part 5: Symbols for Switching, Protective Devices and Miscellaneous Apparatus.
|
KS 04- 179: 1981
|
Kenya Standard Specification for Rigid PVC Conduits and Fittings for Electrical Wiring:Part 2 : Fittings.
|
KS 04- 181: 1980
|
Kenya Standard Specification for Low Voltage Circuit Breakers.
|
KS 04- 183: 1981
|
Kenya Standard Specification for Low Voltage Fuses:Part 2 : Fuses for Industrial Applications.
|
KS 04- 185: 1980
|
Kenya Standard Specification for Lead-Acid Starter Batteries:Part 1: General Requirements and Methods of Test.
|
KS 04- 186: 1980
|
Kenya Standard Specification for Automatic Electrical Fire Alarm Systems in Buildings:Part 2 : Heat-Sensitive Detectors. Point Detectors containing a Static Element.Part 4 : Smoke-Sensitive (Point-Type) Detectors.Part 6 : Control and Indicating Equipment.
|
KS 04- 188: 1980
|
Kenya Standard Specification for PVC Insulations and Sheaths for Electrical Cables and Cords.
|
KS 06- 202: 1981
|
Kenya Standard Methods of Approval of Welding Procedures of Steel in Fusion Welding.
|
KS 06- 203: 1981
|
Kenya Standard Methods for Radiographic (X-ray) Examination of Fusion Butt Welded Steel.
|
KS 06- 206: 1981
|
Kenya Standard Methods of Testing Fusion Welded Joints and Welded Metal in Steel.
|
KS 08- 208: 1981
|
Kenya Standard Glossary of Textile Terms for Natural Fibres.
|
KS 08- 215: 1980
|
Kenya Standard Methods for Determination of Colour Fastness of Textile Materials to Bleaching.
|
KS 06- 217: 1981
|
Kenya Standard Specification for UPVC Pipes and Fittings for Sewerage and Drainage.
|
KS 06- 218: 1981
|
Kenya Standard Specification for General Purpose Steel Hinges. Part 1.
|
KS 06- 219: 1981
|
Kenya Standard Specification for Bolts, Nuts and Screws.
|
KS 05- 220: 1981
|
Kenya Standard Methods for the Microbiological Examination of Food:Part 5: Enumeration of Coagulase Positive Staphylococci in Foods.Part 6 : Examination for Salmonnellae.Part 7 : Examination for Clostridium Botulinum and Clostridium Toxin.
|
KS 03- 221: 1981
|
Kenya Standard Specification for Lime for the Chemical Industry.
|
KS 05- 224: 1980
|
Kenya Standard Specification for Fruit Squashes.
|
KS 05- 225: 1981
|
Kenya Standard Specification for Beer.
|
KS 04-226: 1981
|
Kenya Standard Specification for Factory-Built Assemblies for Low-Voltage Switchgear and Control Gear (FBA):Part 1: General Requirements.Part 2: Particular Requirements for Busbar Trunking Systems (BUSWAYS).
|
KS 05-228: 1981
|
Kenya Standard Specification for Curry Powder.
|
KS 05- 229 : 1981
|
Kenya Standard Specification for Edible Salt.
|
KS 05-230: 1980
|
Kenya Standard Specification for Brilliant Blue Food Grade.
|
KS 05-231: 1980
|
Kenya Standard Specification for Azorubine (Carmoisine) Food Grade.
|
KS 05-232: 1980
|
Kenya Standard Specification for Margarine.
|
KS 04- 233: 1980
|
Kenya Standard Specification for Sound Systems Equipment:Part 1 : General.Part 2 : Loudspeakers.
|
KS 04-238: 1980
|
Kenya Standard Specification for Cassette Tape Records.
|
KS 05-244: 1981
|
Kenya Standard Methods of Analysis of Food for Vitamins:Part 1 : Estimation of Vitamin A and Carotenes.Part 2 : Estimation of Vitamin B1.Part 3 : Estimation of Vitamin B2.Part 4 : Estimation of Pyridoxine (Vitamin Bo).Part 5 : Estimation of Vitamin B12.Part 6 : Estimation of Vitamin C.Part 7 : Estimation of Vitamin D.Part 8 : Estimation of Vitamin E (Tocopherols).Part 9 : Estimation of Folic Acid.Part 10 : Estimation of Nicotinic Acid (Niacin).
|
KS 04- 246: 1981
|
Kenya Standard Specification for 13 Amp Plugs, Switched and Unswitched Socket — Outlets.
|
KS 04- 247: 1981
|
Kenya Standard Specification for Switches for Domestic Use and Similar Purposes.
|
KS 06- 249: 1981
|
Kenya Standard Specification for Automobile Brake Linings and Pads.
|
KS 06- 255: 1981
|
Kenya Standard Specification for Door Locks and Door Lock Furniture.
|
KS 06- 257: 1981
|
Kenya Standard Specification for Door Latches.
|
KS 06- 259: 1981
|
Kenya Standard Specification for Steel Pipes for Water and Gas.
|
KS 06- 261: 1981
|
Kenya Standard Specification for Wire and Wire Products Used for Fencing.
|
KS 08- 262: 1980
|
Kenya Standard Specification f or Standard Wool Adjacent Fabric.
|
KS 08- 263: 1980
|
Kenya Standard Methods for Determination of Colour Fastness of Textile Materials to Weathering:Part 1 : Outdoor Exposure.Part 2 : Xenon Arc Lamp.
|
KS 08- 264: 1981
|
Kenya Standard Methods for Estimation of Moisture, Total Size or Finish, Ash, Fatty Matter and Determination of, Water Soluble Matter in Textiles.
|
KS 08- 265: 1980
|
Kenya Standard Method for Determination of louring Loss in Grey and Finished Cotton Textile Materials,
|
KS 08- 266: 1981
|
Kenya Standard Method for Determination of Colour Fastness of Textile Materials to Rubbing:Part 1 : Dry and Wet.Part 2 : Organic Solvents.
|
KS 05- 283: 1980
|
Kenya Standard Specification for UHT Milk.
|
KS 03- 288: 1980
|
Kenya Standard Specification for Urea Fertilizer Grade.
|
KS 04- 290: 1981
|
Kenya Standard Specification for Galvanized Mild Steel Wire for Armouring of Electric Cables.
|
KS 05- 318: 1981
|
Kenya Standard Specification for Canned Pine apples.
|
KS 05- 328: 1981
|
Kenya Standard Specification for Soft Fruit Drinks.
|
KS 05- 330: 1981
|
Kenya Standard Specification for Sunset Yellow FCF Food Grade.
|
KS 05- 337: 1981
|
Kenya Standard Glossary of Terms Relating to Starch, Including Derivatives and By-Products.
|
KS 05- 340: 1981
|
Kenya Standard Specification for Edible Maize Starch.
|
KS 05- 341: 1981
|
Kenya Standard Specification for Canned Green Peas.
|
KS 05- 342: 1981
|
Kenya Standard Specification for Canned Green Beans.
|
KS 05- 343: 1981
|
Kenya Standard Specification for Canned Mushrooms.
|
KS 05- 345: 1981
|
Kenya Standard Specification for Glucose Syrup.
|
KS 03- 350: 1981
|
Kenya Standard Specification for Potassium Chloride (Muriate of Potash) Fertilizer Grade.
|
KS 03- 351: 1981
|
Kenya Standard Specification for Potassium Sulphate (Sulphate of Potash) Fertilizer Grade.
|
KS 08- 359: 1981
|
Kenya Standard Methods of Determination of Colour Fastness of Textile Materials to Artificial Light (Xenon Arc).
|
KS 08- 360: 1981
|
Kenya Standard Method f or Determination of pH value of Aqueous Extracts of Textile Materials.
|
THE STANDARDS (NO. 2) ORDER
1. This Order may be cited as the Standards (No. 2) Order.
2. Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
SCHEDULE
Number
|
Title of Kenya Standard Specification
|
KS 02- 97: 1982
|
Kenya Standard Specification and Methods of Test for Building Limes-Quicklime and Hydrated Lime.
|
KS 02- 98: 1982
|
Kenya Standard Glossary of Term Used in Lime and Lime Products.
|
KS 02- 99: 1982
|
Kenya Standard Glossary of Terms Relating to Bituminous Materials.
|
KS 02-100: 1982
|
Kenya Standard Specification for Asbestos Cement Corrugated Sheets for Roofing and Cladding.
|
KS 02-105: 1982
|
Kenya Standard Specification for Hard Drawn Steel Wire for Reinforcement of Concrete.
|
KS 08-117: 1982
|
Kenya Standard Specification for Blankets. Part 1: Blankets Made from Natural or Synthetic Fibres.
|
KS 08-135: 1982
|
Kenya Standard Specification for Woven Bags (Polypropylene) for Sugar.
|
KS 04-183: 1982
|
Kenya Standard Specification for Law Voltage Fuses:Part 4: Supplementary Requirements for Fuse-Links for the Protection of Semi-Conductor Devices.
|
KS 04-186: 1982
|
Kenya Standard Specification for Automatic Electrical Fire Alarm Systems in Buildings:Part 8: Specification for Components of Automatic Fire AlarmSystems for Residential Premises.Part 9: Code of Practice for Installation and Servicing.
|
KS 04-192: 1982
|
Kenya Standard Specification for PVC Insulated Flexible Cables and Cords.
|
KS 06-200: 1982
|
Kenya Standard Specification for Non-pressurized Underground Petroleum Tanks.
|
KS 08-210: 1982
|
Kenya Standard Glossary for Textile Terms Relating to Fabrics Made from Natural Fibres.
|
KS 08-212: 1982
|
Kenya Standard Definitions of General Terms, Basic Weaves and Plans for Drafting, Denting and Lifting.
|
KS 04-236: 1982
|
Kenya Standard Specification for Refrigerators and Freezers.
|
KS 04-237: 1982
|
Kenya Standard Specification for Domestic Electric Ranges.
|
KS 06-250: 1982
|
Kenya Standard Specification for Spark Plugs.
|
KS 06-251: 1982
|
Kenya Standard Specification for Motor Vehicle Radiators.
|
KS 06-252: 1982
|
Kenya Standard Specification for Animal-Drawn Ploughs.
|
KS 06-258: 1982
|
Kenya Standard Specification for Screwdriver:Part 1: Screwdrivers for Slotted Head ScrewsPart 2: Screwdrivers for Recessed Head Screws.
|
KS 06-260: 1982
|
Kenya Standard Specification for Laminated Leaf Springs for Automobiles.
|
KS 08-274: 1982
|
Kenya Standard Specification for Sisal Agricultural Baler Twines.
|
KS 04-277: 1982
|
Kenya Standard Specification for Electric Kettle.
|
KS 04-281: 1982
|
Kenya Standard Specification for Electric Hot Plates.
|
KS 06-291: 1982
|
Kenya Standard Specification for Magnetic Particle Method of Flaw Detection.
|
KS 06-295: 1982
|
Kenya Standard Specification for Axes and Hatchets.
|
KS 04-311: 1982
|
Kenya Standard Specification for Miniature Circuit-Breakers and Distribution Boards:Part 1: Miniature Air-Break Circuit-Breakers (MCB’S) for A.C. Circuits.Part 2: Distribution Boards.
|
KS 06-314: 1982
|
Kenya Standard Specification for Electric Cables for Vehicles
|
KS 05-319: 1982
|
Kenya Standard Specification for Sugar Confectionery.
|
KS 06-320: 1982
|
Kenya Standard Specification for PVC Water Hoses.
|
KS 06-321: 1982
|
Kenya Standard Specification for Low Pressure Rubber Water Hoses.
|
KS 06-323: 1982
|
Kenya Standard Specification for ISO Metric Threads (Basic Dimensions).
|
KS 06-324: 1982
|
Kenya Standard Specification for High Pressure Rubber Water Hoses.
|
KS 05-327: 1982
|
Kenya Standard Methods of Sampling and Test for Edible Oils and Fats.
|
KS 06-335: 1982
|
Kenya Standard Specification for Bicycle Tyres.
|
KS 06-356: 1982
|
Kenya Standard Specification for Padbolts.
|
KS 05-358: 1982
|
Kenya Standard Specification for Carbonated Beverages.
|
KS 08-363: 1982
|
Kenya Standard Method for Determination of Dimensional Change of Woven Fabrics on Laundering near the Boiling Point.
|
KS 08-364: 1982
|
Kenya Standard Specification for Woven Cotton apparel fabrics.
|
KS 08-365: 1982
|
Kenya Standard Specification for Woven man made fibre apparel fabrics.
|
KS 08-366: 1982
|
Kenya Standard Specification for Woven Polyster/Cellulosic blended apparel fabrics.
|
KS 03-375: 1982
|
Kenya Standard Specification for Liquid Carbon Dioxide.
|
KS 03-376: 1982
|
Kenya Standard Specification for Foam for Domestic Mattresses.
|
KS 03-378: 1982
|
Kenya Standard Glossary of Terms Used in the Glass Industry.
|
KS 03-379: 1982
|
Kenya Standard Specification for Melamine Plastic Tableware.
|
KS 03-382: 1982
|
Kenya Standard Specification for Power Alcohol.
|
KS 03-386: 1982
|
Kenya Standard Specification for Carbolic Toilet Soap.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 05-38: 1982
|
Kenya Standard Specification for White Sugar.
|
KS 04-186: 1982
|
Kenya Standard Specification for Fire Alarm Systems in Buildings:Part 1: Introduction and Definitions.
|
KS 08-214: 1982
|
Kenya Standard Specification for Woven Interlinings and Linings:Part 1: Woven Interlinings for Shirts.
|
KS 08-273: 1982
|
Kenya Standard Specification for Woven Bags (100 per cent Sisal) for Clean Coffee.
|
KS 04-280: 1982
|
Kenya Standard Specification for Controls for Heating Units in Household Electric Ranges.
|
KS 04-312: 1982
|
Kenya Standard Specification for Low Voltage Motor Starters.Part 1: Direct-On-Line (Full Voltage) A.C. Starter.
|
KS 05-317: 1982
|
Kenya Standard Specification for Meat Grades and Cuts:Part 1:—Beef Grades and Cuts and Veal Grades.Part 2:—Lamb and Mutton Meat and Goat Meat.
|
KS 08-361: 1982
|
Kenya Standard Method for Determination of Water Repellency of Fabrics by Cone Test.
|
KS 08-410: 1982
|
Kenya Standard Specification for Size Designation of Clothes and Body Measurement Procedure.
|
KS 08-412: 1982
|
Kenya Standard Specification for Size Designation for Men’s and Boys’ Ready-to-Wear Clothing.
|
THE STANDARDS (NO. 2) ORDER
1. |
This Order may be cited as the Standards (No. 2) Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 05-40: 1983
|
Kenya Standard on Labelling Pre-packaged Foods (addenda).
|
KS 02-106: 1983
|
Kenya Standard Specification for Bending Dimensions and Scheduling of Bars for Reinforcement of Concrete.
|
KS 06-141: 1982
|
Kenya Standard Specification for Tensile Testing of:Part I: Steel Wire.Part II: Steel Tubes.
|
KS 04-235: 1983
|
Kenya Standard Specification for Radio Receivers.
|
KS 04-278: 1983
|
Kenya Standard Specification for Immersion Water Heaters.
|
KS 04-279: 1983
|
Kenya Standard Specification for Electric Irons for Household Use.
|
KS 02-299: 1983
|
Kenya Standard Specification for Wrought Aluminium and Aluminium Alloy Sections.
|
KS 02-300: 1983
|
Kenya Standard Specification for Burnt Building Bricks.
|
KS 02-301: 1983
|
Kenya Standard Specification for Plywood for General Purposes.
|
KS 02-302: 1983
|
Kenya Standard Specification for Blockboard for General Purposes.
|
KS 04-310: 1983
|
Kenya Standard Specification for Adaptors:Part II: Supplementary Requirements.
|
KS 03-315: 1983
|
Kenya Standard Specification for Motor Vehicle Brake Fluids.
|
KS 05-326: 1982
|
Kenya Standard Specification for Edible Oils and Fats.
|
KS 05-346: 1983
|
Kenya Standard Specification for Baking Powder.
|
KS 05-349: 1983
|
Kenya Standard Specification for Processed Cereal Based Foods for Infants and Children.
|
KS 06-354: 1982
|
Kenya Standard Specification for Counter-Sunk Head Wood Screws.
|
KS 06-355: 1982
|
Kenya Standard Specification for Hot Dip Galvanized Coating on Iron and Steel Articles.
|
KS 03-377: 1983
|
Kenya Standard Specification for Industrial and Safety Rubber Knee Boots.
|
KS 05-383: 1982
|
Kenya Standard Specification for Tartrazine Food Grade.
|
KS 05-384: 1982
|
Kenya Standard Specification for Indigo Carmine Food Grade.
|
KS 05-385: 1982
|
Kenya Standard Specification for Erythrosine.
|
KS 01-393: 1983
|
Kenya Standard Specification for Fresh Pineapples Grade I.
|
KS 01-394: 1983
|
Kenya Standard Specification for Fresh Green Beans Grade I.
|
KS 08-408: 1983
|
Kenya Standard Specification for Cotton Towels.
|
KS 08-409: 1983
|
Kenya Standard Specification for Cotton Baby Napkins.
|
KS 08-414: 1983
|
Kenya Standard Specification for School Wear for Boys and Girls.Part I: Requirements for Making School Wear.
|
KS 08-416: 1983
|
Kenya Standard Specification for Knitted Polyester Fabrics.
|
KS 08-417: 1983
|
Kenya Standard Specification for Knitted Polyester Cellulosic Blended Fabrics.
|
KS 08-419: 1983
|
Kenya Standard Specification for Knitted Cotton Fabrics.
|
KS 03-422: 1983
|
Kenya Standard Specification for Exercise Books.
|
KS 06-430: 1982
|
Kenya Standard Specification for Eddy Current Detection of Defects.
|
THE STANDARDS (EVIDENCE BY CERTIFICATE) REGULATIONS
1. |
These Regulations may be cited as the Standards (Evidence by Certificate) Regulations.
|
2. |
A person who has been appointed by the Bureau as an analyst for the purposes of coming out examinations, tests or comparative studies of commodities, materials, substances, methods or procedures may issue certificates respecting the examinations, tests or comparative studies so carried out.
|
3. |
A certificate issued pursuant to regulation 2 shall be in a form approved by the Bureau and shall contain the following information—
(a) |
the name and address of the analyst;
|
(b) |
a description of the examination, test or study undertaken;
|
(c) |
the results of the examination, test or study supported where necessary by tables, graphs, sketches or photographs;
|
(d) |
a statement as to whether or not the results of the examination, test or study show compliance with the provisions of the Act, any order made thereunder or any other law dealing with standards of quality or description,
|
and shall purport to be signed by the analyst issuing it.
|
4. |
A certificate which complies with regulation 3 may, subject to section 16(2) of the Act, be received as evidence of the matters specified therein.
|
THE STANDARDS- THE STANDARDS ORDER, 1984
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
Schedule
Number
|
Title of Specification or Code of Practice
|
KS 02-21: 1976
|
Kenya Standard Specification for Portland Cement (Ordinary and Rapid Hardening) (Amendment).
|
KS 08-49: 1983
|
Kenya Standard Specification for Knitted Vests.
|
KS 04-112: 1983
|
Kenya Standard Specification for Tungsten Filament Lamps for General Service (Amendment).
|
KS 04-179: 1983
|
Kenya Standard Specification for Rigid PVC:Part 1: Conduits (Second Edition).
|
KS 04-184: 1979
|
Kenya Standard Specification for Dry Primary Cells and Batteries (Amendment).
|
KS 04-186: 1983
|
Kenya Standard Specification for Automatic Fire Alarm Systems in Buildings:Part 10: Manual Calls Points (Frangible Cover Type).
|
KS 08-214: 1983
|
Kenya Standard Specification for Woven Interlinings and Linings:Part 3: Woven Linings for Men’s and Boys’ Apparel.
|
KS 08-367: 1983
|
Kenya Standard Specification for Cotton Canvas.
|
KS 03-376: 1982
|
Kenya Standard Specification for Foam for Domestic Mattresses (Amendment).
|
KS 03-391: 1983
|
Kenya Standard Specification for General Purpose Rubber Knee Boots.
|
KS 03-398: 1983
|
Kenya Standard Specification for Themosetting Plastic Buttons.
|
KS 03-400: 1983
|
Kenya Standard Specification for Acetic Acid.
|
KS 08-411: 1983
|
Kenya Standard Specification for Size Designation for Women’s and Girls’ Ready to Wear Clothing.
|
KS 08-413: 1983
|
Kenya Standard Specification for Size Designation of Clothes for Infants.
|
KS 04-453: 1983
|
Kenya Standard Specification for PVC Insulated Cables (Non-Armoured) for Electric Power and Lighting.
|
KS 06-460: 1983
|
Kenya Standard Specification for Uncoated Aluminium Plate, Sheet and Strip for Hollow-Ware Cooking Utensils.
|
KS 08-493: 1983
|
Kenya Standard Specification for Knitted Nylon Fabric.
|
KS 08-495: 1983
|
Kenya Standard Specification for Gents’ Briefs.
|
KS 08-504: 1983
|
Kenya Standard Specification for Men’s and Boys’ Shirts.
|
KS 09-531: 1983
|
Kenya Standard Specification for System Requirements for Measurement and Calibration Systems.
|
KS 09-533: 1983
|
Kenya Standard Specification for Documentation to be Supplied with Electronic Measuring Equipment.
|
1. |
This Order may be cited as the Standards (No.2) Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedure comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE [s. 9(2)]
Number
|
Title of Specification or Code of Practice
|
KS 02– 95: 1984
|
Kenya standard specification for natural aggregate for concrete.
|
KS 02-103: 1984
|
Kenya standard specification on the use of cold formed steel structural members.
|
KS 02-104: 1984
|
Kenya standard specification on cold rolled steel sections.
|
KS 02-110: 1984
|
Kenya standard specification symbols for plumbing, water supply, heating, ventilation and ducting.
|
KS 01-146: 1984
|
Kenya standard guide on essential requirements for storage of cereals and pulses.
|
KS 01-147: 198
|
Kenya standard guide to control of attack of cereals and pulses by vertebrate and invertebrate animals in storage.
|
KS 04-239: 1984
|
Kenya standard specification for safety requirements for domestic and similar electrical appliances.
|
KS 05-285: 1984
|
Kenya standard specification for milk based baby foods.
|
KS 04-305: 1984
|
Kenya standard specification for general purposes fuse links for domestic and similar purposes (primarily for use in 13A plugs).
|
KS 04-306: 1984
|
Kenya standard specification for ballasts for use in fluorescent lamps (first revision).
|
KS 04-308: 1984
|
Kenya standard specification for ceiling roses.
|
KS 03-388: 1984
|
Kenya standard specification for base paper for waxed bread wrap.
|
KS 03-389: 1984
|
Kenya standard specification for waxed paper for bread wrap.
|
KS 05-404: 1984
|
Kenya standard specification for mango juice preserved exclusively by physical means.
|
KS 05-405: 1984
|
Kenya standard specification for fruit nectars preserved exclusively by physical means:Part 1: Mango nectar.Part 2: Citrus fruit nectar.
|
KS 05-406: 1984
|
Kenya standard specification for passion juice preserved exclusively by physical means.
|
KS 05-407: 1984
|
Kenya standard specification for orange juice preserved exclusively by physical means.
|
KS 05-426: 1984
|
Kenya standard specification for custard powder.
|
KS 05-428: 1984
|
Kenya standard specification for ascorbic acid/food grade.
|
KS 05-429: 1984
|
Kenya standard specification for marketing breast milk substitutes.
|
KS 08-479: 1984
|
Kenya standard specification for sewing threads:Part 1: Cotton sewing threads.
|
KS 08-482: 1984
|
Kenya standard specification for woven bags (polypropylene) for seeds.
|
KS 03-483: 1984
|
Kenya standard specification for base paper for carbon paper.
|
KS 03-484: 1984
|
Kenya standard specification for carbon paper.
|
KS 08-496: 1984
|
Kenya standard specification for acrylic hosiery yarn.
|
KS 08-497: 1984
|
Kenya standard specification for cotton hosiery yarn.
|
KS 08-498: 1984
|
Kenya standard specification for polyester cellulosic blended hosiery yarn.
|
KS 08-505: 1984
|
Kenya standard specification for women’s and girls’ outer wear garments.
|
KS 08-517: 1984
|
Kenya standard specification for ballpoint pens.
|
KS 08-520: 1984
|
Kenya standard specification for woven fabrics used for suits, jackets, slacks, trousers and skirts.
|
KS 08-528: 1984
|
Kenya standard specification for flat cotton wicks.
|
KS 08-529: 1984
|
Kenya standard specification for elastic flat braid.
|
KS 08-559: 1984
|
Kenya standard specification for boys’ and men’s trousers.
|
KS 09-570: 1984
|
Kenya standard specification for safety requirements for electronic measuring apparatus.
|
KS 09-571: 1984
|
Kenya standard specification for laboratory d.c. resistors.
|
KS 02-443: 1984
|
Kenya standard specification for rolled asphalt (hot process) for roads and other paved areas.
|
KS 02-444: 1984
|
Kenya standard, specification for concrete roofing tiles.
|
KS 02-445: 1984
|
Kenya standard specification for rolled steel sections for windows, doors and ventilators
|
KS 02-446: 1984
|
Kenya standard specification for wood-wool cement slabs.
|
KS 02-448: 1984
|
Kenya standard specification for wood mosaic parquet panels.
|
KS 02-564: 1984
|
Kenya standard general technical delivery requirements for steel and steel products.
|
KS 02-565: 1984
|
Kenya standard specification for general principles for verification of safety of structures.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedure comply with the requirements of the relevant Kenya Standard.
|
Schedule
Number
|
Title of Specification or Code of Practice
|
KS 04-111: 1985
|
Kenya Standard Specification for Intruder Alarm Systems in Buildings (1st Revision).Part 1: Systems with audible signaling only.Part 2: Systems with remote signaling.Part 3: Detection devices.
|
KS 04-148: 1985
|
Kenya Standard Safety Requirements for Electronic Equipment.
|
KS 04-180: 1985
|
Kenya Standard Specification for Metallic Conduits (1st Revision).
|
KS 08-214: 1985
|
Kenya Standard Specification for Woven Interlinings and Linings.Part 2: Woven linings for apparel fabrics.
|
KS 04-226: 1985
|
Kenya Standard Specification for Factory-built Assemblies of Low-Voltage Switchgear and Control gear (1st Revision).Part 1: General requirements.Part 2: Particular requirements for Busbar Trunking Systems (Busways).
|
KS 06-248: 1985
|
Kenya Standard Specification for Cold Water Meters.Part 1: Terminology, meteorogical and technological characteristics.Part 2: Guidelines for selection and installation.
|
KS 01-286: 1985
|
Kenya Standard Specification for Mangoes.
|
KS 01-303: 1985
|
Kenya Standard Specification for Avocadoes.
|
KS 04-309: 1985
|
Kenya Standard Specification for Lampholders.Part 1: Bayonet type lampholders.Part 2: Edison screw type lampholders.
|
KS 02-450: 1985
|
Kenya Standard Specification for Asbestos-Cement and Sanitary Pipes.
|
KS 06-452: 1985
|
Kenya Standard Specification for Stainless Steel Sinks.
|
KS 01-454: 1985
|
Kenya Standard Specification for Citrus Fruits.
|
KS 01-455: 1985
|
Kenya Standard Specification for Tomatoes.
|
KS 01-457: 1985
|
Kenya Standard Methods for Test for Tobacco and Tobacco Products.
|
KS 05-459: 1985
|
Kenya Standard Specification for Drinking water.Part 1: The requirements for drinking water.Part 2: Physical methods of test for the quality of drinking water.Part 3: Methods for biological and microbiological test for drinking water.Part 4: Methods for determining metal contaminants in drinking water.Part 5: Methods for determining salts, cations and anions in drinking water.Part 6: Methods for determining gases and organic compounds and radioactivity in drinking water.
|
KS 08-481: 1985
|
Kenya Standard Specification for Woven Bags (Natural Fibres for Seeds).
|
KS 04-502: 1985
|
Kenya Standard Specification for Emergency Lighting Equipment.
|
KS 04-500: 1985
|
Kenya Standard Specification for Filaments Lamps for Road Vehicles.Part 1: Central Battery systems, slave luminaries and associated equipment.Part 2: Self-contained luminaries and associated equipment.
|
KS 04-503: 1985
|
Kenya Code of Practice for the Protection of Structures Against Lightning.
|
KS 08-504: 1985
|
Kenya Standard Specification for Men’s and Boy’s Shirts.Part 2: Measurements for shirts.
|
KS 08-536: 1985
|
Kenya Standard Specification for Milk Cans.
|
KS 08-540: 1985
|
Kenya Standard Specification for Bed Pillow Cases.
|
KS 08-544: 1985
|
Kenya Standard Specification for Women Bags (Natural Fibres) for Rice.
|
KS 02-547: 1985
|
Kenya Standard Specification for Burnt Clay Building Blocks.
|
KS 01-549: 1985
|
Kenya Standard Specification for Wet-blue from Goat and Sheep Skins.
|
KS 01-550: 1985
|
Kenya Standard Specification for Wet-blue from Bovine Hides.
|
KS 05-552: 1985
|
Kenya Standard Specification for Grapefruit Juice preserved exclusively by physical means.
|
KS 05-553: 1985
|
Kenya Standard Specification for Lemon Juice preserved exclusively by physical means.
|
KS 05-554: 1985
|
Kenya Standard Specification for Apple Juice preserved exclusively by physical means.
|
KS 05-555: 1985
|
Kenya Standard Specification for Grapefruit Juice preserved exclusively by physicals means.
|
KS 05-556: 1985
|
Kenya Standard Specification for Pineapple Juice preserved exclusively by physical means.
|
KS 05-557: 1985
|
Kenya Standard Specification fro Guava Nectar preserved exclusively by physical means.
|
KS 05-558: 1985
|
Kenya Standard Specification for Black Currant Juice preserved exclusively by physical means.
|
KS 08-586: 1985
|
Kenya Standard Specification for Webbings.Part 1: Cotton webbings.
|
KS 08-599: 1985
|
Kenya Standard Specification for Shoe Laces.
|
THE STANDARDS (NO. 2) ORDER, 1986
1. |
This Order may be cited as the Standards (No. 2) Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedure comply with the requirements of the relevant Kenya Standard.
|
SCHEDULE
Number:
|
Title of Specification or Code of Practice
|
KS 04-11 1985
|
Kenya Standard Specification for Intruder Alarm Systems in Buildings. (1st Revision.)Part 1: Systems with Audible Signalling Only.Part 2: Systems with Remote Signalling.Part 3: Detection Devices.
|
KS 04-148:1985
|
Kenya Standard Safety Requirements for Electrical Equipment.
|
KS 04-180:1985
|
Kenya Standard Specification for Metallic Conduits. (1st Revision.)
|
KS 08-214:1985
|
Kenya Standard Specification for Woven Interlinings and Linings.Part 2: Woven Linings Apparel Fabrics.
|
KS 04-226:1985
|
Kenya Standard Specification for Factory-built Assemblies of Low-Voltage Switchgear and Controlgear. (1st Revision.)Part 1: General requirements.Part 2: Particular Requirements for Busbar Trunking Systems (Busways).
|
KS 06-248:1985
|
Kenya Standard Specification for Cold Water Meters.Part 1: Terminology, Metrological and Technological Characteristics.Part 2: Guildelines for Selection and Installation.
|
KS 01-286:1985
|
Kenya Standard Specification for Mangoes.
|
KS 01-303:1985
|
Kenya Standard Specification for Avocadoes.
|
KS 04-309:1985
|
Kenya Standard Specification for Lampholders.Part 1: Bayonet Type Lampholders.Part 2: Edison Screw Type Lampholders.
|
KS 02-450:1985
|
Kenya Standard Specification for Asbestos - Cement and Sanitary Pipes.
|
KS 06-452:1985
|
Kenya Standard Specification for Citrus Fruits.
|
KS 01-454:1985
|
Kenya Standard Specification for Tomatoes.
|
KS 01-457:1985
|
Kenya Standard Methods for Test for Tobacco and Tobacco Products.
|
KS 05-459:1985
|
Kenya Standard Specification for Drinking Water.Part 1 : The requirements for Drinking Water.Part 2: Physical Methods of Test for the Quality of Drinking Water.Part 3 : Methods for Biological and Microbiological Test for Drinking Water.Pain 4: Methods for Determining Metal Contaminants in Drinking Water.Part 5: Methods for Determining Salts, Cations and Anions in Drinking Water.Part 6: 'Methods for Determining Cases and Organic Compounds and Radioactivity in Drinking Water.
|
KS 08-481 :1985
|
Kenya Standard Specification for Woven Bags (Natural Fibres) for Seeds.
|
KS 04-500:1985
|
Kenya Standard Specification for Filaments for Road Vehicles.
|
KS 04-502:1985
|
Kenya Standard Specification for Emergency Lighting Equipment.Part 1: Central Battery Systems, Slave Luminairies and Associated Equipment.Part 2: Self-contained Luminairies and Associated Equipment.
|
KS 04-503:1985
|
Kenya Code of Practice for the Protection of Structures Against Lightning.
|
KS 08-504:1985
|
Kenya Standard Specification for Men's and Boy's Shirts.Part 2: Measurements for Shirts.
|
KS 06-536: 1985
|
Kenya Standard Specification for Milk Cans.
|
KS 08-540:4985
|
Kenya Standard Specification for Bed Pillow Cases
|
KS 08-544:1985
|
Kenya Standard Specification for Woven Bags (Natural Fibres) for Rice.
|
KS 02-547:1985
|
Kenya Standard Specification for Burnt Clay Building Blocks.
|
KS 01-549:1985
|
Kenya Standard Specification for Wet-Blue from Goat and Sheep Skins.
|
KS 01-550:1985
|
Kenya Standard Specification for Wet-Blue from Bovine Hides.
|
KS 05-552:1985
|
Kenya Standard Specification for Grapefruit Juice Preserved Exclusively by Physical Means.
|
KS 05-553: 1485
|
Kenya Standard Specification for Lemon Juice Preserved Exclusively by Physical Means.
|
KS 05-554:1985
|
Kenya Standard Specification for Apple Juice Preserved Exclusively by Physical Means.
|
KS 05-555 1985
|
Kenya Standard Specification for Grape Juice Preserved Exclusively by Physical Means.
|
KS 05-556 1985
|
Kenya Standard Specification for Pineapple Juice Preserved Exclusively by Physical Means.
|
KS 05-557 1985
|
Kenya Standard Specification for Guava Nectar Preserved Exclusively by Physical Means.
|
KS 05-558:1985
|
Kenya Standard Specification for Black Currant Juice Preserved Exclusively by Physical Means.
|
KS 08-586:1985
|
Kenya Standard Specification for Webbings.Part 1: Cotton Webbings.
|
KS 08-599:1985
|
Kenya Standard Specification for Shoe Laces.
|
THE STANDARDS (NO. 3) ORDER, 1986
1. |
This Order may be cited as the Standards (No. 3) Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date, which is six weeks after the date of publication of this Order, unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 05-54:1985
|
Kenya Standard Specification for Infant Food Formula. (1st Revision.)
|
KS 02-94:1985
|
Kenya Standard Specification for Preservation of Timber.
|
KS 03-162:1985
|
Kenya Standard Specification for Road Marking Paints.
|
KS 04-226:1985
|
Kenya Standard Specification for Factory-built Assemblies of Low Voltage Switchgear and Controlgear.Part 3: Particular Requirements for Fuseboards.Part 4: Particular Requirements for Miniature Circuit-breaker Boards (m.c.b.s).
|
KS 05-344:1985
|
Kenya Standard Specification for Honey.
|
KS 08-479:1985
|
Kenya Standard Specification for Sewing Threads.Part 2: Sewing Threads Made Wholly or Partly from Synthetic Fibres.
|
KS 02-548:1985
|
Kenya Standard Specification for Precast Concrete Pipes and Fittings for Drainage, Sewage and Culverts.
|
KS 08-559:1985
|
Kenya Standard Specification for Men's and Boys' Trousers.Part 2: Measurements for Trousers.
|
KS 03-575:1985
|
Kenya Standard Specification for Corrugated Fibreboard Boxes.
|
KS 09-634:1985
|
Kenya Standard Specification for Vernier Callipers Reading 0.1 and 0.5 mm.
|
KS 09-635:1985
|
Kenya Standard Specification for Vernier Calipers Reading to 0.02 mm.
|
KS 09-636:1985
|
Kenya Standard Specification for Micrometer Callipers for External Measurement.
|
KS 09-644:1985
|
Kenya Standard Specification for Class 0.5, 1 and 2 A.C. Watthour Meters.
|
KS 02-659:1985
|
Kenya Methods of Classification and Measurement of Plywood Panels and Test Pieces.
|
In ACCORDANCE with section 4(1)(b) of the Standards Act, the Cabinet Secretary for Commerce and Industry has, on the recommendation of the National Standards Council, approved the standards of the Kenya Bureau of Standards in the fields of measurement specified in the Schedule as the standards with which precision instruments, gauges and scientific apparatus may be compared to determine the degree of accuracy of such instruments, gauges and apparatus.
SCHEDULE
Mass
Length
Force
Industrial Measurements (including Angle, Gears, Threads and Surface Texture)
Time and Frequency
Energy
Power and Attenuation
Voltage
Current
Resistance
Capacitance and Inductance
Pressure and Vacuum
Temperature
Volume and Flow
Density and Viscosity
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 04-226: 1985
|
Kenya standard specification for factory-built assemblies of low-voltage switchgear and controlgear (FBA).Part 5: Particular requirements for consumer units.
|
KS 09-248: 1985
|
Kenya standard specification for cold water meters.Part 3: Test methods and equipment.
|
KS 06-294: 1985
|
Kenya standard specification for air filters for internal combustion engines.
|
KS 06-325: 1985
|
Kenya standard for engineering drawing practice.
|
KS 06-333: 1985
|
Kenya standard specification for fuel filters for diesel engines.
|
KS 06-334: 1985
|
Kenya standard specification for fuel filters for petrol engines.
|
KS 06-395: 1985
|
Kenya standard specification for automobile radiator hoses.
|
KS 08-586: 1985
|
Kenya standard specification for cotton webbings.Part 2; Webbings made wholly or partly from synthetic fibres.
|
KS 08-598: 1985
|
Kenya standard specification for ladies’ cardigans.
|
KS 04-633: 1985
|
Kenya standard specification for electric toasters.
|
KS 08-640: 1985
|
Kenya standard specification for men’s and boys’ pyjamas.Part 1: Making-up requirements.
|
KS 08-642: 1985
|
Kenya standard specification for sisal packing twines.
|
KS 08-643: 1985
|
Kenya standard specification for spindle tapes.
|
KS 06-664: 1985
|
Kenya standard specification for seat belt assemblies for motor vehicles.
|
KS 09-704: 1985
|
Kenya standard specification for gauge blocks.
|
KS 09-705: 1985
|
Kenya standard specification for surface roughness parameters, their values and general rules for specifying requirements.
|
KS 09-706: 1985
|
Kenya standard specification for surface roughness terminology.Part 1: Surface and its parameters.Part 2: Terminology—measurement of surface roughness parameters.
|
KS 09-708: 1985
|
Kenya standard specification for parallel involute gears—ISO system of accuracy.
|
KS 09-709: 1985
|
Kenya standard specification for cylindrical weights from 1 gram to 10 kilograms (medium accuracy class, also called: Class M2).
|
KS 09-710: 1985
|
Kenya standard specification for rectangular bar weights from 5 kilograms to 50 kilograms, medium class accuracy.
|
KS 09-711: 1985
|
Kenya standard specification for weights of accuracy E1, E2, F1, F2, M1 from 50 kg. to 1 mg.
|
KS 09-712: 1985
|
Kenya standard specification for standard weights for verification officers.
|
KS 09-713: 1985
|
Kenya standard specification for metrological regulations for non-automatic weighing machines.
|
KS 09-714: 1985
|
Kenya standard specification for direct acting indicating analogue electrical measuring instruments and their accessories.Part 1: Definitions and general requirements common to all parts.Part 2: Special requirements for ammeters and volmeters.Part 3: Special requirements for waltmeters and varmeters.Part 4: Special requirements for frequency meters.Part 5: Special requirements for phase meters, power factor meters and synchroscopes.Part 6: Special requirements for ohmmeters (impendence meters) and conductance meters.Part 7: Special requirements for multifunction instruments.Part 8: Special requirements for accessories.
|
KS 09-715: 1985
|
Kenya standard specification for laboratory A.C. resistors.
|
KS 09-716: 1985
|
Kenya standard specification for voltage transformers.
|
KS 09-717: 1985
|
Kenya standard specification for current transformers.
|
KS 09-718: 1985
|
Kenya standard specification for dimensions for panel-mounted indicating and recording measuring instruments.
|
KS 09-719: 1985
|
Kenya standard specification for maximum demand indicators, class 1.0.
|
KS 09-720: 1985
|
Kenya standard specification for telemetering for consumption and demand.
|
KS 09-721: 1985
|
Kenya standard specification for varhour (reactive energy) meters.
|
KS 09-722: 1985
|
Kenya standard specification for quartz crystal controlled oscillators.Part: 1: General information, tests conditions methods.Part 2: Guide to the use of quartz crystal controlled oscillators.
|
KS 09-726: 1985
|
Kenya standard specification for glass capilary kinematic viscometers—specification and operating instructions.
|
KS 09-728: 1985
|
Kenya standard specification for tensile testing machines.Part 1: General requirements.Part 2: Large tensile testing machines and universal testing machines.Part 3: Small tensile testing machines.
|
KS 09-729: 1985
|
Kenya standard specification for compression testing machines.
|
KS 09-730: 1985
|
Kenya standard specification for material testing machines and elastic proving devices for static load measurements.
|
KS 09-731: 1985
|
Kenya standard specification for bourdon tube pressure and vacuum gauges.Part 2: Metric units.
|
KS 09-732: 1985
|
Kenya standard specification for tyres pressure gauges.Part 1: Indicating plunger portable type.Part 2: Dial portable type.Part 3 Inflation gauges for roads vehicles.
|
KS 09-733: 1985
|
Kenya standard specification for liquid-in-glass thermometers.
|
KS 09-734: 1985
|
Kenya standard specification for solid-stem general purpose thermometers.
|
KS 09-735: 1985
|
Kenya standard specification for enclosed-scale general purpose thermometers (commercial quality for general use).
|
KS 09-736: 1985
|
Kenya standard specification for solid-stem calorimeter thermometers (short range solid-stem thermometers for use in bomb calorimetry and other uses where accurate temperature is required).
|
KS 09-737: 1985
|
Kenya standard specification for enclosed-scale calorimeter thermometer (short range enclosed thermometers for use in bomb calorimetry and other purposes in accurate measurements).
|
KS 09-738: 1985
|
Kenya standard specification for long solid-stem thermometers for precision use with enclosed-scale (not exceeding 375 mm).
|
KS 09-739: 1985
|
Kenya standard specification for short solid-stem thermometers for precision use (not exceeding 20 mm length).
|
KS 09-740: 1985
|
Kenya standard specification for long enclosed-scale thermometers for precision used. (General used in precision work.)
|
KS 09-741: 1985
|
Kenya standard specification for short enclosed-scale thermometers for precision use.
|
THE STANDARDS (NO. 2) ORDER
1. |
This Order may be cited as the Standards (No. 2) Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedure comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification of Code of Practice
|
KS 05-29: 1979
|
Kenya standard specification for dried whole milk and skimmed milk powder (1st Revision).
|
KS 05-38: 1982
|
Kenya standard specification for white sugar (2nd Revision).
|
KS 05-169: 1979
|
Kenya standard specification for wheat flour (1st Revision).
|
KS 04-183: 1978
|
Kenya standard specification for low voltage fuses (Amendment).
|
KS 04-184: 1979
|
Kenya standard specification for dry primary cells and batteries (1st Revision).
|
KS 04-238: 1979
|
Kenya standard specification for cassettes for commercial tape and domestic use (1st Revision).
|
KS 04-310: 1986
|
Kenya standard specification for adaptors.Part 1: General requirements.
|
KS 05-328: 1986
|
Kenya standard specification for soft fruit drinks (Amendment).
|
KS 06-331: 1986
|
Kenya standard specification for tolerancing system of I.S.O. metric threads.
|
KS 03-421: 1986
|
Kenya standard specification for newsprint.
|
KS 05-423: 1986
|
Kenya code of practice for handling, processing and distribution of fish.Part 1: Quality requirements, packaging and making for the fresh, chilled, frozen and smoked fish.Part 2: Sanitation requirements for fresh, chilled, frozen and smoked fish.Part 3: The requirements for retailers handling fresh, chilled, frozen and smoked fish.Part 4: The hygienic requirements for all staff engaged in handling fish.
|
KS 05-424: 1986
|
Kenya standard specification for dried salted fish.
|
KS 05-425: 1986
|
Kenya standard specification for dried prawns (Shrimps).
|
KS 03-512: 1986
|
Kenya standard specification for rubber flooring tiles.
|
KS 03-518: 1986
|
Kenya standard specification for fountain pen inks.
|
KS 05-523: 1986
|
Kenya standard specification for breakfast cereals.Part 1: Rolled/flaked oats (quick cooking type).
|
KS 05-524: 1986
|
Kenya standard specification for pasta products.
|
KS 05-551: 1986
|
Kenya standard specification for mayonaise and mayonaise-like products.
|
KS 08-559: 1986
|
Kenya standard specification for men’s and boys’ trousers.
|
KS 02-572: 1986
|
Kenya standard specification for hot rolled steel sections.
|
KS 02-573: 1986
|
Kenya standard specification for cold-worked (high-yield) steel bars for the reinforcement of concrete.
|
KS 03-576: 1986
|
Kenya standard specification for hair shampoo, soap-based.
|
KS 03-577: 1986
|
Kenya standard specification for hair shampoo synthetic, detergent-based.
|
KS 03-578: 1985
|
Kenya standard specification for nail polish.
|
KS 03-579: 1986
|
Kenya standard specification for skin-lightening creams.
|
KS 03-580: 1986
|
Kenya standard specification for general purpose creams, lotions and gels for skin care.
|
KS 03-581: 1986
|
Kenya standard specification for marketed petroleum jelly products ready for use as human body ointment.
|
KS 03-582: 1986
|
Kenya standard specification for paper boards for packaging.
|
KS 03-590: 1986
|
Kenya standard specification for screw thread glass bottles.
|
KS 03-591: 1986
|
Kenya standard specification for industrial methylated spirits.
|
KS 02-594: 1986
|
Kenya standard specification for concrete.
|
KS 03-603: 1986
|
Kenya standard specification for files and folders.
|
KS 03-604: 1986
|
Kenya standard specification for stencil papers.
|
KS 03-605: 1986
|
Kenya standard specification for duplicating papers.
|
KS 08-606: 1986
|
Kenya standard specification for blended cellulosic polyester bedsheets.
|
KS 03-621: 1986
|
Kenya standard specification for bituminous paints for cold application.
|
KS 02-622: 1987
|
Kenya standard specification for aluminium printing paints for woodwork.
|
KS 02-625: 1987
|
Kenya standard specification for precast concrete masonry units.
|
KS 02-624: 1986
|
Kenya standard specification for bitumen roofing felt.
|
KS 08-628: 1986
|
Kenya standard specification for elastic webbing.
|
KS 09-637: 1986
|
Kenya standard specification for dial gauges.
|
KS 08-638: 1986
|
Kenya standard specification for absorbent cotton gauze.
|
KS 08-640: 1986
|
Kenya standard specification for men’s and boys’ pyjamas.Part 2: Measurements for pyjamas.
|
KS 03-653: 1986
|
Kenya standard specification for household insecticidal aerosols.
|
KS 03-654: 1986
|
Kenya standard specification for mosquito coils.
|
KS 03-655: 1986
|
Kenya standard specification for scouring powders.
|
KS 08-665: 1986
|
Kenya standard specification for textile labels.
|
KS 04-668: 1986
|
Kenya standard specification for boxes for enclosure for electrical accessories.
|
KS 05-686: 1987
|
Kenya standard specification for peanut butter.
|
KS 03-698: 1986
|
Kenya standard specification for liquid detergent for household hand dish washing.
|
KS 04-765: 1986
|
Kenya standard of resistance for copper.
|
KS 03-814: 1987
|
Kenya standard specification for retroreflective materials for traffic signs.
|
KS 03-815: 1987
|
Kenya standard specification for portable reflective warning triangles for motor vehicles.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedures comply with the requirement of the relevant Kenya Standards.
|
Schedule
Number
|
Title of Specification or Code of Practice
|
KS 02-17: 1986
|
Kenya standard specification for sawn timber (1st revision).
|
KS 08-117: 1987
|
Kenya standard specification for blankets. Part 2: Blankets made from wool. Part 3: Cotton leno cellular blankets
|
KS 06-151: 1979
|
Kenya standard specification for machetes (pangas) (1st revision).
|
KS 04-246: 1981
|
Kenya standard specification for 13A fused plugs, and unswitched socket outlets (1st revision).
|
KS 02-431: 1987
|
Kenya standard specification for clay roofing tiles.
|
KS 08-442: 1987
|
Kenya standard code of practice for drycleaning.
|
KS 01-458: 1987
|
Kenya standard specification for common salt and mineral supplements for ruminant livestock.
|
KS 06-477: 1987
|
Kenya standard specification for safety razor blades and razors. Part 1: Safety razor blades. Part 2: Razors.
|
KS 08-541: 1987
|
Kenya standard specification for woven fabrics for uniforms. Part 1: Cotton, man-made fibres and blends. Part 2: Fabrics made wholly or partly from wool.
|
KS 08-630: 1987
|
Kenya standard specification method of test for determination of tenacity of textile fibres and yams.Part 1: Fibres.Part 2: Yarns.
|
KS 02-656: 1987
|
Kenya standard specification for flush doors' leafs.Part 1: Solid core type.
|
KS 08-687: 1987
|
Kenya standard specification for men's uniforms. Part 1: Uniform trousers.
|
KS 08-747: 1987
|
Kenya standard specification for preservative treatment for textiles. Part 1: Specification for treatment.
|
KS 04-763: 1987
|
Kenya standard specification for wrought aluminium strip for electrical purposes.
|
KS 01-789: 1987
|
Kenya standard specification for fresh red onions.
|
KS 04-190: 1987
|
Kenya standard specification for stranded aluminium conductors steel-reinforced and galvanized steel wires for reinforcing aluminium conductors.Part 1: Galvanized steel wires for reinforcing aluminium conductors.Part 2: Aluminium conductors steel-reinforced.
|
KS 06-255: 1987
|
Kenya standard specification for door locks in buildings (1st revision).
|
KS 04-290: 1987
|
Kenya standard specification for galvanized mild steel wires for armouring of electric cables (1st revision).
|
KS 06-476: 1987
|
Kenya standard specification for uncoated domestic aluminium holloware products.Part 2: Aluminium pans.
|
KS 06-487: 1987
|
Kenya standard specification for hose couplings for petrol, diesel and paraffin.
|
KS 06-491: 1987
|
Kenya standard specification for hydraulic spray nozzles for insert, fungus and weed control.
|
KS 06-537: 1987
|
Kenya standard specification for paper and garment pins.
|
KS 04-646: 1987
|
Kenya standard specification for electric fence controllers.Part 1: Mains operated.Part 2: Battery operated.
|
KS 02-682 :1987
|
Kenya standard specification for oxidized bitumen adhesives for roofing.
|
KS 08-114: 1979
|
Kenya standard specification for cotton bedsheets (1st revision).
|
KS 04-181: 1986
|
Kenya standard specification for low-voltage circuit breakers. (Amendment.)
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after a date which is six weeks after the date of publication of this Order unless the commodities and methods and procedure comply with the requirements of the relevant Kenya Standards.
|
Schedule
Number
|
Title of Specification or Code of Practice
|
KS 06-02: 1988
|
Kenya standard specification for galvanized plain and corrugated steel sheets for general use. 1st Revision.
|
KS 05-34: 1976
|
Kenya standard specification for yoghurts. 1st Revision.Part 1: Specification for yoghurts (plain and sweetened).Part 2: Specification for flavoured yoghurts.
|
KS 06-72: 1987
|
Kenya standard specification for mild steel nails. 1st Revision.
|
KS 06-149: 1987
|
Kenya standard specification for unplasticized polyvinyl chloride pipes for cold water services. Amendment slip.Part 1: General requirements.
|
KS 06-149: 1987
|
Kenya standard specification for unplasticized polyvinyl chloride pipes for cold water services. 1st Revision.Part 2: Metric series.
|
KS 06-149: 1987
|
Kenya standard specification for unplasticized polyvinyl chloride pipes for cold water services. 1st Revision.Part 3: Inch series.
|
KS 05-168: 1988
|
Kenya standard specification for dry milled maize products. 1st Revision.
|
KS 04-179: 1979
|
Kenya standard specification for rigid P.V.C. conduits and fittings for electrical wring. 1st Revision.Part 1: Conduits.
|
KS 04-185: 1984
|
Kenya standard specification for lead-acid starter batteries. 1st Revision.
|
KS 04-188: 1980
|
Kenya standard specification for P.V.C. insulations and sheaths of electric cables and cords. 1st Revision.
|
KS 04-192: 1982
|
Kenya standard specification for P.V.C. insulated flexible cables and cords of rated voltage Uo/U up to and including 450/750 V. 1st Revision.
|
KS 06-217: 1987
|
Kenya standard specification for unplasticized polyvinyl chloride (U.P.V.C) pipes for buried drain and sewer. Amendment slip.
|
KS 04-234: 1987
|
Kenya standard specification for receivers for television broadcast.
|
KS 04-247: 1988
|
Kenya standard specification for switches for domestic and similar purposes. 1st Revision.
|
KS 06-249: 1988
|
Kenya standard specification for automobile drum brake linings and disc brake pads. 1st Revision.
|
KS 06-256: 1988
|
Kenya standard specification for drawer and cupboard locks.
|
KS 06-261: 1987
|
Kenya standard specification for steel wires and wire products used for fencing. 1st Revision.
|
KS 04-282: 1988
|
Kenya standard specification for elements for electric water heaters for permanent installation in household cylinders or tanks.
|
KS 06-293: 1988
|
Kenya standard specification for lubricating oil filters for internal combustion engines.
|
KS 04-310: 1983
|
Kenya standard specification for adaptors. 1st Revision.Part 2: Supplementary requirements.
|
KS 04-311: 1982
|
Kenya standard specification for miniature circuit breakers (M.C.B.’s). 1st Revision.
|
KS 06-322: 1988
|
Kenya standard specification for covered electrodes for manual arc welding of mild steel and low alloy steel.
|
KS 02-447: 1988
|
Kenya standard specification for wood chipboard.
|
KS 04-453: 1988
|
Kenya standard specification for P.V.C. insulated cables (non-armoured) for electric power lighting, 1st Revision.
|
KS 01-456: 1987
|
Kenya standard specification for dry beans.
|
KS 06-463: 1987
|
Kenya standard specification for telescopic shock absorbers for automobile suspension damping.
|
KS 04-503: 1985
|
Kenya standard code of practice for the protection of structures against lighting. Amendment No. 1.
|
KS 05-522: 1987
|
Kenya standard specification for canned fish.Part 1: Fish canned in tomato sauce.Part 2: Fish canned in brine.
|
KS 08-584: 1987
|
Kenya standard specification for stockings.Part 2: Ladies stockings.
|
KS 01-593: 1987
|
Kenya standard specification for green coffee beans.
|
KS 03-601: 1988
|
Kenya standard specification for hair creams.
|
KS 05-608: 1988
|
Kenya standard specification for neutral spirit for manufacture of alcoholic beverages.
|
KS 03-647: 1988
|
Kenya standard specification for industrial oxygen.
|
KS 03-648: 1988
|
Kenya standard specification for acetylene gas.
|
KS 02-656: 1987
|
Kenya standard specification for flush doors’ leafs-cellular and semi solid core type.
|
KS 02-657: 1988
|
Kenya standard specification for window stays fasteners and handles for vertically hinged windows.
|
KS 05-661: 1988
|
Kenya standard specification for cookies.
|
KS 04-662: 1988
|
Kenya standard specification for wiring regulations.Part 1: Electrical installation in building.Part 2: Requirements for special installations and locations.
|
KS 06-663: 1988
|
Kenya standard specification for hot rolled wire rods.
|
KS 03-666: 1988
|
Kenya standard specification for white spirit (mineral turpentine).
|
KS 03-667: 1988
|
Kenya standard specification for water thinned priming paints for wood.
|
KS 01-672: 1987
|
Kenya standard specification for fresh mushrooms.
|
KS 01-674: 1987
|
Kenya standard specification for dog feeds.
|
KS 01-675: 1987
|
Kenya standard specification for chromed crust bovine leather.
|
KS 03-683: 1988
|
Kenya standard specification for baker’s yeast.
|
KS 08-687: 1987
|
Kenya standard specification for men’s uniforms.Part 2: Uniform coats.
|
KS 08-687: 1988
|
Kenya standard specification for uniforms.Part 3: Uniform shirts.
|
KS 01-689: 1987
|
Kenya standard specification for milled rice.
|
KS 01-690: 1987
|
Kenya standard specification for seeds for legumes.
|
KS 01-691: 1987
|
Kenya standard specification for seeds for cucurbit vegetables.
|
KS 01-692: 1987
|
Kenya standard specification for solanaceous vegetables.
|
KS 01-693: 1987
|
Kenya standard specification for seed for bulbs vegetables.
|
KS 02-742: 1988
|
Kenya standard code of practice for laying roofing tiles.
|
KS 08-748: 1988
|
Kenya standard specification for coffee drying cloth.
|
KS 02-755: 1988
|
Kenya standard design loading for buildings.Part 1: Code of practice for imposed loads.
|
KS 02-761: 1988
|
Kenya standard specification for rectangular pressed steel tanks.
|
KS 02-771: 1988
|
Kenya standard specification for softwood timber grades for structural use.
|
KS 08-779: 1988
|
Kenya standard specification for carpets.Part 1: Tufted carpets.
|
KS 08-781: 1988
|
Kenya standard specification for cones.Part 1: Paper cones.
|
KS 01-788: 1987
|
Kenya standard specification for strawberries.
|
KS 03-793: 1988
|
Kenya standard specification for liquid oxidation hair dyes.
|
KS 03-794: 1988
|
Kenya standard specification for formulated powder hair dyes.
|
KS 03-803: 1988
|
Kenya standard specification for liquid toilet soaps.Part 1: Liquid toilet soap.Part 2: Liquid floor soap.Part 3: Lotion soap.
|
KS 03-805: 1988
|
Kenya standard specification for waterless hand cleaner.
|
KS 03-809: 1988
|
Kenya standard specification for toilet cleaners.Part 1: Powder toilet bowls cleansers.Part 2: Liquid toilet bowls and urinals cleansers.
|
KS 03-811: 1988
|
Kenya standard specification for semi-gloss emulsion paint for exterior use.
|
KS 02-817: 1987
|
Kenya standard specification for commercial grades for solder.
|
THE STANDARDS - CALIBRATION
IN EXERCISE of the powers conferred by regulation 3 of the andards (National Calibration Service) Regulations, 1984, the Cabinet Secretary for Industry, directs that—
(a) the categories of instruments and equipment specified in the second column of the Schedule shall be calibrated by the Bureau on or before 31st May, 1990;
(b) the Kenya Standards to be used for calibration shall be those specified in the third column;
(c) the maximum intervals between each calibration shall be those specified in the fourth column; and
(d) the fees to be paid for the calibration shall be those prescribed and published by the Bureau for that purpose.
SCHEDULE
Field of measurement
|
Instrument
|
KS No.
|
Maximum interval of time before next calibration
|
1. Industrial measurement
|
Dial gauges reading in 0.01mm.
|
09-637:1986
|
1 year
|
2. Electricity
|
Instrument transformers:(i) Current transformers(ii)Voltage transformers
|
09-717:198509-716:1985
|
5 years5 years
|
3. Volume/Flow
|
Turbine meters .............................Displacement meters...................Prover tanks..................................Road and rail vehicles (tank cars)Barges (ships and barge tanks)Spherical and spheroidal tanksHorizontal tanksUpright cylindrical tanks
|
09-858:198709-857:198709-856:198709-855:198709-854:198709-853:198709-852:198709-851:1987
|
1 year1 year1 year1 year2 years5 years2 years10 years
|
THE STANDARDS LEVY ORDER, 1990
ARRANGEMENT OF SECTIONS
1. |
Citation and commencement
|
5. |
Register of manufacturers
|
6. |
Maintenance of records by manufacturers
|
7. |
Access to manufacturer's records
|
8. |
Civil liability for non-payment of any sum due
|
SCHEDULES
SECOND SCHEDULE [r. 6(1)] |
|
THE STANDARDS LEVY ORDER, 1990
1. |
Citation and commencement
This Order may be cited as the Standards Levy Order and shall come into operation on the 1st July.
|
2. |
Interpretation
In this Order, unless the context otherwise require—
"ex-factory", means the selling price excluding value add and discounts;
"Fund", means the Standards Levy Fund established under s 10C(1) of the Act;
"inspector", means a person appointed under section 13 Act;
"levy", means the charge payable in terms of paragraph 3;
"manufacturer", means any person or person who engages process of manufacture in terms of section 2 of the Act.
|
3. |
Levy
Subject to the Act there shall be paid by each manufacturer a levy recoverable at source at the rate of two-tenths of one per cent of the ex-factory price in respect of manufacture during each month subject to a maximum ceiling of Kenya shillings four hundred thousand per annum and to a minimum ceiling of Kenya shillings one thousand per month.
[L.N. 154/1998, s. 2, L.N. 183/1999, s. 2, L.N. 54/2000, s. 2.]
|
4. |
Notification
(1) |
For the purpose of complying with paragraph 3, every person, or persons who manufacture or intend to manufacture, shall notify the Director, Kenya Bureau of Standards, in the format set out in Form SL. 1 set out in the First Schedule.
|
(2) |
Failure to notify the Director as aforesaid shall not affect the obligation of a manufacturer to pay the levy in terms of this Order.
|
|
5. |
Register of manufacturers
The Director shall maintain or cause to be maintained a register of all manufacturers who pay the levy.
|
6. |
Maintenance of records by manufacturers
(1) |
Every manufacturer shall maintain or cause to be maintained monthly records in the Standards Levy Return in the format set out in Form SL. 2 set out in the Second Schedule.
|
(2) |
Every manufacturer shall in accordance with this Order maintain complete records corresponding to the prevailing date of all transactions which may affect his liability to pay the levy under this order.
|
(3) |
Every manufacturer shall pay the levy by transmitting to the Director Form SL. 2 duly completed with the amount of the levy on or before the thirtieth day of the succeeding month.
|
|
7. |
Access to manufacturer's records
The records maintained in accordance with paragraph 6, shall on written request, be made available to the Director or a person duly authorized by him.
|
8. |
Civil liability for non-payment of any sum due
Non-payment of any sum due under this Order shall be deemed to be a civil debt recoverable summarily by the Director or a for non-payment person duly authorized by him.
|
9. |
Exemption
The provisions of this Order shall not apply to that person or persons whose ex-factory manufacture does not exceed Kenya shillings two hundred thousand per annum.
|
10. |
Levy fund
The objectives of the Fund established in accordance with section 10C of the Act shall, subject to the approval of the Cabinet Secretary, be to—
(a) |
develop and promote standardization and quality control of commodities, services and metrology;
|
(b) |
undertake collaborative research on behalf of the industry calculated to improve productivity and quality of outputs for the domestic and export markets;
|
(c) |
undertake training on behalf of the industry on standardization, quality control and metrology;
|
(d) |
meeting any expenses relating to the establishment and operation of the fund; and
|
(e) |
any other purpose which the Cabinet Secretary, in consultation with the National Standards Council, considers would serve the best interest of the industry, the consumers and the Government.
|
|
11. |
Bank account
All moneys received in accordance with the provision of this Order shall be paid into a special bank account entitled "The Standards Levy Fund" and expenditure therefrom shall be controlled by the National Standards Council.
|
12. |
Investments
Any part of the Fund not immediately required for the purpose of the Fund may, subject to the written approval of the Cabinet Secretary and the Treasury, be invested in such a manner as the ational Standards Council may deem to be proper.
|
13. |
Books of accounts
The National Standards Council shall cause to be kept all proper books and records of account of the income, expenditure, assets and liabilities of the Fund and shall prepare such other accounts as the Cabinet Secretary may require and, in addition, shall prepare early balance sheets made up to the end of each financial year.
|
14. |
Audit
The accounts of the Fund shall be audited and reported on annually by the Auditor-General (Corporations) in accordance with part VII of the Exchequer and Audit Act.
15. |
The Fund shall produce and lay before the Auditor-General (Corporations) all accounts of the Fund with all vouchers in support hereof, and all books, papers and writings in its possession or Books of accounts control relating thereto, and the Auditor-General (Corporations) shall be entitled to require from all members, officers and servants of the Bureau such information and explanations as may be necessary for the proper performance of his duties.
|
16. |
At the completion of an audit under section 15, the Auditor-General (Corporations) shall make a report thereon to the National Standards Council and and shall at the same time furnish a copy of the report to the Cabinet Secretary.
|
17. |
The expenses incidental to the auditing of the accounts shall be borne by the Fund.
|
|
FIRST SCHEDULE [r. 4]
STANDARD LEVY NOTIFICATION FORM
Name of Business ...................................................
Plot No..............................................................
Road/Street..........................................................
Address...............................................................
Telephone No..........................................................
Admin. Location.......................................................
Name and address of proprietor or partners; and in the case of companies, the chief executive and directors..............
......................................................................
......................................................................
......................................................................
All commodities manufactured or to be manufactured
......................................................................
......................................................................
Date upon which manufacture commenced or will commence ............ 19.........
Total value of manufacture in the last calendar year K£..............
If applicant has branches operating, give name and address of branches
......................................................................
......................................................................
......................................................................
SECOND SCHEDULE [r. 6(1)]
1. |
Name ...........................................
Address ...........................................
Telephone No. ...........................................
Entry No. ...........................................
|
2. |
Period covered by this return from ......................19..... to.................., 19........
3Commodity
|
4Quantity of Manufacture
|
5Total Value Ex-Factory KSh.
|
6Rate of Levy
|
7Total Levy Payable KSh.
|
8Amount Paid KSh.
|
9Balance KSh.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explanation of balance
..............................................................................
..............................................................................
I, ..................................., hereby certify that the information in this return is true, correct and complete.
.................................
Signature and position
(Company stamp)
Date
|
Amount Paid
|
Receipt No.
|
Period of which Payable
|
Penalty Rate
|
Penalty Payable
|
Total Amount Payable
|
Balance Dr. Cr.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after the date of publication of this Order unless than commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code Practice
|
KS 06-09:1990
|
Kenya standard specification for liquefied petroleum gas (LPG) cylinders.Part 3: Kenya standard code of practice for filling, distribution and retailing of LPG in cylinders.
|
KS 02-22: 1990
|
Kenya standard specification for hot rolled steel bars for reinforcement of concrete. 1st Revision.
|
KS 01-62: 1990
|
Kenya standard specification for dairy cattle feed supplements. 1st Revision.
|
KS 08-68: 1990
|
Kenya standard textile care labelling code. 1st Revision.
|
KS 08-117: 1989
|
Kenya standard specification for blankets.Part 4: Blankets made from recycled fibres.
|
KS 01-138: 1990
|
Kenya standard specification for compounded pig feeds. 1st Revision.
|
KS 06-153: 1989
|
Kenya standard specification for steel wheel-barrows, 1st Revision.
|
KS 06-218: 1990
|
Kenya standard specification for steel hinges. 1st Revision.
|
KS 04-233: 1990
|
Kenya standard specification for sound systems equipment.Part 3: Amplifiers.
|
KS 04-237: 1989
|
Kenya standard specification for household electric ranges. 1st Revision.
|
KS 06-250: 1989
|
Kenya standard specification for spark plugs. 1st Revision.
|
KS 02-289: 1990
|
Kenya standard specification for steel windows and doors.
|
KS 06-357: 1990
|
Kenya standard specification for tower bolts.
|
KS 06-488: 1990
|
Kenya standard specification for galvanized mild steel cylinders for hot water purposes.
|
KS 06-489: 1990
|
Kenya standard specification for power take-off for agricultural tractors.
|
KS 04-503: 1990
|
Kenya standard code of practice for the protection of structures against lightning.Part 2: Code of practice for earthing.
|
KS 03-515: 1990
|
Kenya standard specification for gasohol.
|
KS 03-602: 1989
|
Kenya standard specification for hair oils.
|
KS 08-607: 1990
|
Kenya standard specification for standard adjacent fabrics.Part 6: Secondary acetate.Part 7: Triacetate.Part 8: Cotton.
|
KS 05-614: 1989
|
Kenya standard specification for gin.
|
KS 05-615: 1989
|
Kenya standard specification for rum.
|
KS 01-670: 1989
|
Kenya standard specification for brinjals (egg plants) or aubergines.
|
KS 01-671: 1989
|
Kenya standard specification for fresh capsicum.
|
KS 01-676: 1990
|
Kenya standard specification for grades of raw hides and skins.Part 1: Cattle hides and calf skins.
|
KS 01-677: 1990
|
Kenya standard specification for full-chrome upper leather.
|
KS 01-679: 1989
|
Kenya standard specification for sole leather.
|
KS 01-694: 1989
|
Kenya standard specification for groundnuts (peanuts).Part 1: Raw groundnuts for table use and oil milling.
|
KS 01-695: 1989
|
Kenya standard specification for cut flowers and cut foliage.Part 1: Fresh cut flowers.
|
KS 06-700: 1990
|
Kenya standard specification for inner tubes for motorized vehicles.
|
KS 04-743: 1989
|
Kenya standard specification for battery chargers.
|
KS 05-753: 1989
|
Kenya standard specification for chilli sauce.
|
KS 04-762: 1989
|
Kenya standard specification for copper strips for electrical purposes.
|
KS 02-766: 1990
|
Kenya standard specification for clay flooring tiles.
|
KS 01-784: 1989
|
Kenya standard specification for fish meal.
|
KS 01-785: 1989
|
Kenya standard specification for bone meal for compounding animal feeds.
|
KS 01-786: 1989
|
Kenya standard specification for blood meal for compounding animal feeds.
|
KS 01-787: 1989
|
Kenya standard specification for fresh okra.
|
KS 03-796: 1989
|
Kenya standard specification for mineral oil for cosmetic industry.
|
KS 03-797: 1989
|
Kenya standard specification for sesame (simsim) oil for cosmetic industry.
|
KS 03-798: 1989
|
Kenya standard specification for groundnut (peanut) oil for cosmetic industry.
|
KS 03-800: 1989
|
Kenya standard specification for coconut oil for cosmetic industry.
|
KS 03-810: 1990
|
Kenya standard specification for printing inks for use on food wrappers.
|
KS 01-818: 1989
|
Kenya standard code of practice for preservation of raw cattle hides and calf skins.Part 1: By stack salting.
|
KS 01-838: 1989
|
Kenya standard specification for meat and bone-meal.
|
KS 04-869: 1990
|
Kenya standard specification for lead-acid traction batteries.Part 1: General requirements and methods of test.Part 2: Dimensions of cells and marking of polarity on cells.
|
KS 04-889: 1989
|
Kenya standard specification for cable trunking.Part 1: Steel surface trunking.Part 2: Steel underfloor (duct) trunking.Part 3: Trunking made of insulating materials.
|
KS 04-890: 1989
|
Kenya standard specification for classification of degrees of protection provided by enclosures.
|
KS 06-896: 1990
|
Kenya standard specification for periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylenes containers).
|
KS 06-897: 1990
|
Kenya standard specification for periodic inspection testing and maintenance of transportable gas containers for dissolved acetylenes.
|
KS 06-901: 1990
|
Kenya standard specification for malleable cast iron.
|
KS 06-902: 1990
|
Kenya standard specification for steel castings for general engineering purposes.Part 1: General requirements.Part 2: General technical delivery requirements.Part 3: Charpy impact test (V-notch) for steel.
|
KS 06-903: 1990
|
Kenya standard specification for aluminium and aluminium alloy ingots and castings.
|
KS 06-904: 1990
|
Kenya standard specification for cast copper alloy.
|
KS 06-905: 1990
|
Kenya standard specification for wheel rims made of cast light alloy for passenger cars.
|
KS 06-963: 1990
|
Kenya standard specification for industrial safety helmets.
|
KS 04-1021: 1990
|
Kenya standard specification for general purpose steel wire strand.
|
KS 03-1024: 1990
|
Kenya standard specification for vitreous china water closset pansPart 1: Wash down water closset pans.Part 2: Squatting wash down water closset pans.
|
KS 03-1025: 1990
|
Kenya standard specification for metre rules and rulers for school and office.
|
KS 03-1026: 1990
|
Kenya standard specification for protractors for use in schools.
|
KS 08-1033: 1990
|
Kenya standard specification for cotton Khanga.
|
KS 01-1040: 1990
|
Kenya standard specification for bee-hive Kenya top bar hive.
|
KS 08-1056: 1990
|
Kenya standard specification for woven wrapping cloth.Part 1: Polypropylene cloth.Part 2: Jute cloth.
|
KS 09-1079: 1990
|
Kenya standard specification for depth micrometers.
|
KS 09-1080: 1990
|
Kenya standard specification for precision vernier depth gauges.
|
KS 09-1081: 1990
|
Kenya standard specification for precision vernier height gauges.
|
KS 09-1082: 1990
|
Kenya standard specification for spirit levels for use in precision engineering.
|
KS 09-1083: 1990
|
Kenya standard specification for spirit level vials.
|
KS 09-1084: 1990
|
pH measurement.Part 1: Specification for laboratory pH meters.Part 2: Specification for pH scale.Part 3: Specification for reference value standard solutions and operational reference standard solutions.Part 4: Specification for glass and reference electrodes for the measurement of pH.
|
THE STANDARDS (NO. 2) ORDER
1. |
This Order may be cited as the Standards (No. 2) Order.
|
2. |
Kenya Standards having been declared for several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 06- 09: 1989
|
Kenya standard specification for L.P.G. cylinders.Part 2: Code of practice for safe use of L.P.G. in permanent dwellings.
|
KS 06-229: 1989
|
Kenya standard specification for edible salt. 1st Revision.
|
KS 06-259: 1989
|
Kenya standard specification for steel pipes for water and gas suitable for screwing. 1st Revision.
|
KS 05-702: 1989
|
Kenya standard specification for vinegar.
|
KS 06-756: 1989
|
Kenya standard specification for speedometer cables for automobiles.
|
KS 06-844: 1989
|
Kenya standard specification for hole sizes before threading in relation to machine parts.
|
KS 06-845: 1989
|
Kenya standard specification for grooved pulleys for classical and narrow veebelts.
|
KS 06-886: 1989
|
Kenya standard specification for widths across flats and mechanical properties of fasteners.Part 1: Dimensions across flats.
|
KS 06-886: 1989
|
Kenya standard specification for widths across flats and mechanical properties of fasteners.Part 2: Mechanical properties of fasteners.
|
KS 06-886: 1989
|
Kenya standard specification for widths across flats and mechanical properties of fasteners.Part 3: Tolerance system for threaded fasteners.
|
KS 06-895: 1989
|
Kenya standard specification for bicycles (safety requirements).
|
KS 06-906: 1989
|
Kenya standard specification for motor-cycle (symbols for controls, indicators and tell-tales).
|
KS 08-132: 1989
|
Kenya standard specification for woven bags made from natural fibres for cereals and pulses. 1st Revision.
|
KS 08-367: 1989
|
Kenya standard specification for cotton canvas. 1st Revision.
|
KS 08-507: 1989
|
Kenya standard specification for sanitary towels.Part 1: Sanitary towels for external use.
|
KS 08-639: 1989
|
Kenya standard specification for gauze bandages.Part 1: Cotton gauze bandages.
|
KS 03-649: 1989
|
Kenya standard specification for automobile windscreens.Part 1: Toughened windscreens.Part 2: Laminated windscreens.
|
KS 08-779: 1989
|
Kenya standard specification for carpets.Part 2: Sisal carpets.
|
KS 08-781: 1989
|
Kenya standard specification for cones.Part 2: Plastic cones.
|
KS 03-799: 1989
|
Kenya standard specification for castor oil for cosmetic industry.
|
KS 03-802: 1989
|
Kenya standard specification for cut-size office papers.Part 1: Bond papers.
|
KS 03-813: 1989
|
Kenya standard specification for matt solvent borne paints for interior and exterior use.
|
KS 03-915: 1989
|
Kenya standard specification for anhydrous lanolin for cosmetic industry.
|
KS 03-916: 1989
|
Kenya standard specification for shaving preparations.Part 1: Shaving creams.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 05- 28 :1990
|
Kenya standard specification for cheese 1st Revision.Part 1: General requirements for cheese.
|
KS 05- 39:1990
|
Kenya standard specification for tomato products.1st Revision.Part 1: General requirements for labelling.Part 2: Guidelines forAdd I: Date marking.Add II: Nutrition labelling.Add III: Claims.Add IV: Non-retail containers of foods.
|
KS 08-117 :1990
|
Kenya standard specification for blankets.Part 6: Non-woven blankets.
|
KS 04-179 :1990
|
Kenya standard specification for rigid PVC conduits and fittings for electrical wiring.Part 2: Fittings (1st Revision).
|
KS 04-194 : 1990
|
Kenya standard specification for PVC insulated cables for electricity supply.2nd Revision.
|
KS 01-227 : 1990
|
Kenya standard specification for cashew kernels.Part 2: Roasted cashew kernels.
|
KS 08-273 : 1990
|
Kenya standard specification for woven bags (100 per cent sisal) for clean coffee beans.
|
KS 04-468 :1990
|
Kenya standard specification for flexible PVC conduits for electricity wiring.Part 2: Corrugated conduits.
|
KS 05-522 : 1990
|
Kenya standard specification for canned fish.Part 3: Fish canned in oil.
|
KS 05-523 :1990
|
Kenya standard specification for breakfast cereals.Part 2: Flaked cereals (ready-to-eat).
|
KS 08-542 : 1990
|
Kenya standard specification for the national flag of Kenya.Part 1: Cotton, man-made fibres and blends.Part 2: Wool/Synthetic blends.
|
KS 08-597 : 1990
|
Kenya standard specification for mattress covers.
|
KS 05-609 : 1990
|
Kenya standard specification for still (grape) table wines.
|
KS 05-611 : 1990
|
Kenya standard specification for fruit wines.
|
KS 05-613 : 1990
|
Kenya standard specification for vodka.
|
KS 05-618 :1990
|
Kenya standard specification for cider and perry.
|
KS 08-629 : 1990
|
Kenya standard specification for sweaters.
|
KS 05-660 : 1990
|
Kenya standard specification on the schedule for safe use of food additives.NumberKS 08-273 : 1990KS 04-468 :1990 KS 05-522 : 1990 KS 05-523 :1990 KS 08-542 : 1990KS 08-597 : 1990 KS 05-609 : 1990 KS 05-611 : 1990KS 05-613 : 1990 KS 05-618 :1990KS 08-629 : 1990 KS 05-660 : 1990Part 1: Part 2: Part 3: Part 4:General principles. Carry overs.Permitted preservatives. Permitted anti-oxidants.
|
KS 01-694 : 1990
|
Kenya standard specification for groundnuts.Part 2: Roasted groundnuts.
|
KS 08-697 :1990
|
Kenya standard code of practice for grading of textile materials.Part 1: Fabrics.
|
KS 02-752 : 1990
|
Kenya standard code of practice for laying and finishing of concrete and terrazo flooring tiles.
|
KS 02-767 : 1990
|
Kenya standard code of practice for laying clay flooring tiles.
|
KS 02-769 :1990
|
Kenya standard specification for bitumen road emulsions (anionic and cationic).
|
KS 01-868 : 1990
|
Kenya standard specification for macadamia kernels.
|
KS 01-870 :1990
|
Kenya standard specification for cucumbers and courgettes.
|
KS 08-892 : 1990
|
Kenya standard specification for fabrics for curtain and drapes.Part 1: Woven fabrics.
|
KS 03-911:1990
|
Kenya standard specification for paint brushes.
|
KS 03-924 : 1990
|
Kenya standard specification for motor vehicle chevrons and strips.
|
KS 08-933 : 1990
|
Kenya standard specification for tubes (bobbins) for ring frames.
|
KS 04-934: 1990
|
Kenya standard specification for cooker control units.
|
KS 04-936 :1990
|
Kenya standard specification for insulated cables and flexible cords for use in high temperature zones.
|
KS 01-938 : 1990
|
Kenya standard specification for roasted mixed nut kernels.
|
KS 01-940:1990
|
Kenya standard specification for head lettuce.
|
KS 08-942 :1990
|
Kenya standard specification for process colours for traffic signs.
|
KS 08-944:1990
|
Kenya standard specification for woven bags (100 per cent sisal) for green tea leaves.Part 1: Three dimensional type. Part 2: Two dimensional type.
|
KS 06-950 : 1990
|
Kenya standard specification for metallic materials.Part 1: Wire-wrapping test.Part 2: Tube-flattening test.Part 3: Bend test.Part 4: Tube (in full section)—bend test.
|
KS 04-1022 :1990
|
Kenya standard specification for 600/1000v PVC insulated single-phase concentric cables with copper or aluminium conductors for electricity supply.
|
KS 04-1023 : 1990
|
Kenya standard specification for aluminium drawing stock for electrical purposes.
|
KS 01-1078 : 1990
|
Kenya standard specification for flyer bobbins.
|
KS 01-1078 : 1990
|
Kenya standard specification for chillies.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
The Kenya Standard having been declared for the commodity set out here below, no person shall manufacture or sell the commodity on or after the date of publication of this Order unless the commodity complies with the requirements of the said Kenya Standard.
Number
|
Title of Specification
|
KS 03–275
|
Kenya Standard specification for motor gasoline (petrol or motor spirit)
|
|
1. This Order may be cited as the Standards Order.
2. The Standards having been declared for several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 04-180: 1991
|
Kenya standard specification for metallic conduits and fillings for electrical installations.Part 2: Fittings.
|
KS 04-185: 1991
|
Kenya standard specification for lead-acid starter batteries.Part 2: Dimensions of batteries, dimensions and marking of terminals.
|
KS 04-186: 1991
|
Kenya standard specification for automatic fire alarm systems in buildings.Part 7: Methods of test of sensitivity to fire.
|
KS 03-647: 1991
|
Kenya standard specification for industrial oxygen. 1st revision.
|
KS 04-744: 1991
|
Kenya standard specification for earth-rods and their connectors.Part 1: Copper-clad earth rods.
|
KS 08-893: 1991
|
Kenya standard specification for upholstery fabrics.Part 1: Woven and knitted fabrics.
|
KS 08-894: 1991
|
Kenya standard specification for silver cans.
|
KS 03-909: 1991
|
Kenya standard specification for semi-gloss solvent borne paints for interior/exterior use.
|
KS 03-910: 1991
|
Kenya standard specification for super gloss solvent borne paints for interior/exterior use.
|
KS 03-912: 1991
|
Kenya standard specification for xylene.
|
KS 03-913: 1991
|
Kenya standard specification for toluene.
|
KS 03-914: 1991
|
Kenya standard specification for acetone.
|
KS 03-921: 1991
|
Kenya standard specification for kraft liner.
|
KS 03-948: 1991
|
Kenya standard specification for corrugated fibre-board boxes for horticultural export.
|
KS 08-1032: 1991
|
Kenya standard specification for cylindrical tubes for open-end spinning.
|
KS 08-1035: 1991
|
Kenya standard specification for kitenge.
|
KS 08-1062: 1991
|
Kenya standard specification for infants’ outwear garments.
|
KS 04-1067: 1991
|
Kenya standard specification for lead-acid stationary batteries.Part 1: General requirements.Part 2: Requirements for pasted plate type batteries.
|
KS 04-1068: 1991
|
Kenya standard specification for domestic metallic meter boxes.Part 1: Single phase metering.
|
KS 04-1069: 1991
|
Kenya standard specification for PVC covered conductors for overhead power lines.
|
KS 04-1109: 1991
|
Kenya standard specification for earthing clamps.
|
KS 04-1111: 1991
|
Kenya standard specification for household electrical appliances.Part 5: Particular requirements for battery powered shavers, hair clippers and similar appliances and their charging and battery assemblies.Part 9: Requirements for a.c. electrical shavers, hair clippers and similar appliances.
|
KS 08-1118: 1991
|
Kenya standard specification for top and bottom aprons used in the textile industry.
|
KS 08-1119: 1991
|
Kenya standard specification for ring travelers.Part 1: Metallic travellers.Part 2: Plastic travellers.
|
KS 08-117: 1991
|
Kenya standard specification for woven blankets.Part 5: Blankets made from acrylic fibres.
|
KS 04-185: 1991
|
Kenya standard specification for lead acid starter batteries.Part 5: General requirements and methods of test.
|
KS 03-511: 1991
|
Kenya standard specification for plastic containers.Part 1: Buckets.
|
KS 02-749: 1991
|
Kenya standard specification for fibre concrete roofing tiles.
|
KS 03-920: 1991
|
Kenya standard specification for jute/sisal batching oil.
|
KS 03-1027: 1991
|
Kenya standard specification for auto refinishing paints.Part 1: Synthetic resin type.
|
KS 03-1101: 1991
|
Kenya standard specification for titanium dioxide pigments for paints.
|
KS 03-1102: 1991
|
Kenya standard specification for lithopone pigments for paints.
|
KS 08-1107: 1991
|
Kenya standard specification for two-pin reversible plugs and shaver socket outlets.
|
KS 06-08: 1992
|
Kenya standard specification for S.I. units.
|
KS 05-10: 1992 (second edition)
|
Kenya standard specification for unprocessed whole milk.
|
KS 03-24: 1992
|
Kenya standard specification for toilet paper in rolls and reels. (1st revision).
|
KS 05-28: 1992
|
Kenya standard specification for cheese.Part 2: Kenyan Cheddar cheese (1st revision)
|
KS 06-52: 1992
|
Kenya standard specification for exhaust systems. (1st revision).Part 1: Motor vehicle exhaust systems.Part 2: Steel pipes used in exhaust systems.
|
KS 06-204: 1992
|
Kenya standard specification for shovels.Part 1: Mild steel shovels. (1st revision).Part 2: Medium steel shovels. (1st revision).
|
KS 08-274: 1992 (second edition)
|
Kenya standard specification for sisal: Agriculture baler twines (1st revision)
|
KS 05-319: 1992 (second edition)
|
Kenya standard specification for sugar confectionery. (1st revision).Part 1: High boiled sweets.Part 3: Chewing gum and bubble gum.
|
KS 06-408: 1992 (second edition)
|
Kenya standard specification for towels. (1st revision).
|
KS 06-452: 1992 (second edition)
|
Kenya standard specification for filing cabinets for general office purposes. (1st revision).
|
KS 08-479: 1992 (second edition)
|
Kenya standard specification for sewing threads.Part 1: Cotton sewing threads.Part 2: Sewing threads made wholly or partly from synthetic fibres. (1st revision).
|
KS 08-520: 1992 (second edition)
|
Kenya standard specification for woven fabrics used for suits, jackets and trousers. (1st revision).
|
KS 03-588: 1992
|
Kenya standard specification for PVC slippers.
|
KS 01-592: 1992
|
Kenya standard specification for cigarettes.
|
KS 05-612: 1992
|
Kenya standard specification for whisky.
|
KS 05-616: 1992
|
Kenya standard specification for brandy.
|
KS 08-642: 1992
|
Kenya standard specification for sisal packing twines.
|
KS 03-650: 1992
|
Kenya standard specification for glass globes for hurricane lamps.
|
KS 01-871: 1992
|
Kenya standard specification for compounded fish feeds.Part 1: Trout feeds.
|
KS 06-1086: 1992
|
Kenya standard specification for hacksaw blades.
|
KS 03-1099: 1992
|
Kenya standard specification for engine oils.
|
KS 08-1120: 1992
|
Kenya standard specification for doubling and twisting bobbins.
|
KS 08-1124: 1992
|
Kenya standard specification for sisal polishing cloth.
|
KS 08-1125: 1992
|
Kenya standard specification for carpet backing fabrics.Part 1: Jute fabrics.
|
KS 08-1127: 1992
|
Kenya standard specification for curtain tapes.
|
KS 08-1142: 1992
|
Kenya standard specification for polyolefin agricultural twines.
|
KS 08-1145: 1992
|
Kenya standard specification for three-strand (hawser-laid) and eight-strand (plaited) poly propylene monofilament or film ropes.
|
KS 08-1146: 1992
|
Kenya standard specification for polyolefin woven sacks (bags) for packing fertilizer.
|
KS 08-1151: 1992
|
Kenya standard specification for transfer cones.
|
KS 03-1222: 1992
|
Kenya standard specification for ink pasteblack for stencil duplicating machine.
|
KS 05-30: 1993
|
Kenya standard specification for pasteurized liquid milk. (1st revision).
|
KS 05-319: 1993
|
Kenya standard specification for sugar confectionery. (1st revision)Part 2: Caramel, toffee and fudge.
|
KS 05-326: 1993
|
Kenya standard specification for edible oils and fats.Part 7: Standard for palm oil.
|
KS 05-405: 1993
|
Kenya standard specification for fruit nectars preserved exclusively by physical means.Part 3: Specification for passion fruit nectar.
|
KS 05-435: 1993
|
Kenya standard specification for dehydrated vegetables.
|
KS 05-436: 1993
|
Kenya standard specification for cocoa powder.Part 1: Unsweetened cocoa powder.
|
KS 05-703: 1993
|
Kenya standard specification for reconstituted/recombined pasteurized liquid milk.
|
KS 02-751: 1993
|
Kenya standard specification for concrete flooring titles.
|
KS 05-941: 1993
|
Kenya standard specification for fermented (cultured) milk.
|
KS 06-1020: 1993
|
Kenya standard specification for light gauge metal containers.Part 1: Definitions and determination methods for dimensions and capacities for open-top cans.Part 2: Capacities and related cross sections for open-top cans for general foods.Part 3: Capacities and related cross sections for cans for meat and meat products.Part 4: Capacities and related cross section for open-top cans for drinks.Part 5: Capacities and related cross section for open-top cans for edible oil.Part 6 Capacities and related cross sections for open-top cans for fish and fishery products.Part 7: Capacities and related cross sections for open-top cans for milk.Part 8: Internal diameters of round open-top cans.
|
KS 03-1027: 1993
|
Kenya standard specification for auto refinishing paints.Part 2: Nitrocellulose resin.
|
KS 02-1070: 1993
|
Kenya standard specification for stabilized soil blocks.
|
KS 06-72: 1994
|
Kenya standard specification for steel nails (1st revision).
|
KS 02-95: 1994
|
Kenya standard specification for natural aggregates for concrete (1st revision).
|
KS 08-135: 1994
|
Kenya standard specification for woven polyolefin sacks for sugar (1st revision).
|
KS 03-352: 1994
|
Kenya standard specification for fluoridated tooth-paste.
|
KS 06-372: 1994
|
Kenya standard specification for matatu vehicles construction.
|
KS 08-409: 1994
|
Kenya standard specification for baby napkins. (1st revision).
|
KS 06-478: 1994
|
Kenya standard specification for polyethylene plastic (PE) pipes for water supply. (Low and high density).Part 1: Requirements.
|
KS 08-528: 1994
|
Kenya standard specification for flat cotton wicks (1st revision).
|
KS 08-606: 1994
|
Kenya standard specification for bed sheets made from blended polyester/cellulosic or polyester and cellulosic combination fabric. (1st revision).
|
KS 06-823: 1994
|
Kenya standard specification for V-belts for industrial machines.
|
KS 08-893: 1994
|
Kenya standard specification for upholstery fabrics.Part 2: Coated fabrics.
|
KS 08-1034: 1994
|
Kenya standard specification for kikoi.
|
KS 06-1063: 1994
|
Kenya standard specification for hurricane lanterns.
|
KS 06-1064: 1994
|
Kenya standard specification for non-pressure stoves.
|
KS 08-1152: 1994
|
Kenya standard specification for weft pins.Part 2: Automatic looms.
|
KS 02-1262: 1994
|
Kenya standard specification for ordinary portland cement.
|
KS 02-1263: 1994
|
Kenya standard specification for portland pozzolana cement.
|
KS 04-1111: 1994
|
Kenya standard specification for household and similar electrical appliances.Part 16: Particular requirements for commercial deep fat fryers.
|
KS 04-1229: 1994
|
Kenya standard specification for reels and wooden drums, for electric cables, wires and bare conductors.Part 1: Wooden drums.Part 2: Metal drums (reels).
|
KS 03-1103: 1994
|
Kenya standard specification for aluminium pigments for paints.
|
KS 03-1180: 1994
|
Kenya standard specification for ethyl ketone.
|
KS 03-1181: 1994
|
Kenya standard specification for methyl isobutyl ketone.
|
KS 03-1182: 1994
|
Kenya standard specification for butyl alcohol.
|
KS 03-1183: 1994
|
Kenya standard specification for isobutyl alcohol.
|
KS 03-1184: 1994
|
Kenya standard specification for isopropyl alcohol.
|
KS 05-1121: 1994
|
Kenya standard specification for sparkling wines.
|
KS 05-1122: 1994
|
Kenya standard specification for fortified wines.
|
KS 05-1041: 1994
|
Kenya standard specification for opaque beers.
|
KS 05-1123: 1994
|
Kenya standard specification for buns.
|
KS 05-1042: 1994
|
Kenya standard specification for cakes.
|
KS 05-459: 1994
|
Kenya standard specification for drinking water.Part 7: Specification for containerized mineral water.
|
KS 02-1228: 1994
|
Kenya standard specification for road aggregates.
|
KS 06-292: 1994
|
Kenya standard specification for joints and fittings for use with unplasticized PVC pressure pipes.Part 1: Injection moulded unplasticised PVC fittings for solvent welding for use with pipes, including portable water supply.Part 2: Fabricated unplasticized PVC fittings and mechanical joints made principally from unplasticized pipes.Part 3: Specification for solvent cement.
|
KS 01-1169: 1995
|
Kenya standard specification for garden peas.Part 1: Green peas in pods.
|
KS 08-1257: 1995
|
Kenya standard specification for umbrella fabrics.Part 3: Silk fabrics.
|
KS 08-116: 1995
|
Kenya standard specification for cotton drills. (Second revision).
|
KS 08-505: 1995
|
Kenya standard specification for women’s and girls’ outwear garments. (1st revision).
|
KS 08-1264: 1995
|
Kenya standard specification for shuttles.Part 1: Shuttles for automatic looms.
|
KS 08-1233: 1995
|
Kenya standard specification for spinning doubling and twisting rings.
|
KS 05-1173: 1995
|
Kenya standard specification for canned plums.
|
KS 05-1175: 1995
|
Kenya standard specification for canned guava.
|
KS 05-1176: 1995
|
Kenya standard specification for canned peaches.
|
KS 05-1178: 1995
|
Kenya standard specification for canned tropical fruit salad.
|
KS 05-1088: 1995
|
Kenya standard specification for soups and broths.
|
KS 08-1094: 1995
|
Kenya standard specification for crips.Part 1: Potato crips.
|
KS 05-1159: 1995
|
Kenya standard specification for caraway.
|
KS 05-1160: 1995
|
Kenya standard specification for cumin.
|
KS 05-1161: 1995
|
Kenya standard specification for cinnamon.
|
KS 05-1162: 1995
|
Kenya standard specification for fenugreek powder.
|
KS 05-1163: 1995
|
Kenya standard specification for thyme.
|
KS 05-1164: 1995
|
Kenya standard specification for paprika.
|
KS 05-1046: 1995
|
Kenya standard specification for asparagus (vegetables).
|
KS 01-1048: 1995
|
Kenya standard specification for passion fruits.
|
KS 01-1050: 1995
|
Kenya standard specification for fresh whole carrots (vegetables).
|
KS 01-949: 1995
|
Kenya standard specification for rice bran.
|
KS 04-314: 1995
|
Kenya standard specification for cables for vehicles (1st revision).
|
KS 04-1108: 1995
|
Kenya standard specification for isolating transformers and safety isolating transformers.Part 1: General requirements.Part 2: Supplementary requirements for isolating transformers.
|
KS 04-1111: 1995
|
Kenya standard specification for household and similar electrical appliances.Part 17: Particular requirements for commercial electric griddles and griddle grills.Part 19: Particular requirements for commercial electrical forced convection ovens.
|
KS 03-1273: 1995
|
Kenya standard specification for unsaturated polyester resin for body fillers.
|
KS 03-1106: 1995
|
Kenya standard specification for water closet (WC) plastic seats and covers.
|
KS 03-511: 1995
|
Kenya standard specification for plastic containers.
|
KS 06-883: 1995
|
Kenya standard specification for hook bolts.
|
KS 06-476: 1995
|
Kenya standard specification for uncoated aluminium holloware cooking utensils.Part 1: Domestic aluminium sufurias.
|
KS 06-1225: 1995
|
Kenya standard specification for domestic thermos flasks.
|
KS 04-1111: 1995
|
Kenya standard specification for household and similar electrical appliances.Part 2: Particular requirements for electric clocks.
|
KS 06-992: 1995
|
Kenya standard specification for manually operated chaff cutter.
|
KS 06-1287: 1995
|
Kenya standard specification for non-destructive testing qualification and certification of personnel.
|
KS 08-1150: 1995
|
Kenya standard specification for condenser rubbers for cards.
|
KS 08-117: 1995
|
Kenya standard specification for woven blankets.Part 1: Blankets made from mixed fibres. (1st revision).Part 2: Blankets made from wool fibres. (1st revision).
|
KS 08-988: 1995
|
Kenya standard specification for silver and yarn dyeing beams.
|
KS 08-1126: 1995
|
Kenya standard specification for neckties.Part 1: Neckties made from woven fabrics.
|
KS 08-1128: 1995
|
Kenya standard specification for wicks for non-pressure stoves.
|
KS 08-1148: 1995
|
Kenya standard specification for fabrics for water resistant clothing.
|
KS 08-1149: 1995
|
Kenya standard specification for optical performance of high-visibility garments and accessories for use on the highway.
|
KS 08-1221: 1995
|
Kenya standard specification for crepe bandage.
|
KS 08-1232: 1995
|
Kenya standard specification for cylindrical tubes.
|
KS 01-995: 1996
|
Kenya standard specification for green grams.
|
KS 01-1049: 1996
|
Kenya standard specification for papaya.
|
KS 03-1266: 1996
|
Kenya standard specification for body fillers.
|
KS 03-1267: 1996
|
Kenya standard specification for flexible polyurethane foam pillows for domestic use.
|
KS 03-1275: 1996
|
Kenya standard specification for emulsion distempers.
|
KS 03-1290: 1996
|
Kenya standard specification for bleaching agents.Part 1: Sodium hypochlorite solution.
|
KS 06-884: 1996
|
Kenya standard specification for draw-off taps and stop valves for water services.
|
KS 06-885: 1996
|
Kenya standard specification for underground stop valves for water services.
|
KS 06-1333: 1996
|
Kenya standard specification for punches.Part 1: Specification for wood and leather marking punches.Part 2: Specification for centre punches.
|
KS 06-1334: 1996
|
Kenya standard specification for engineer’s squares.
|
KS 06-1335: 1996
|
Kenya standard specification for rivets.
|
KS 06-1337: 1996
|
Kenya standard specification for continuous (piano) hinges.
|
KS 06-1338: 1996
|
Kenya standard specification for engineer’s files.
|
KS 05-241: 1996
|
Kenya standard specification for biscuits. (1st revision).
|
KS 05-1097: 1996
|
Kenya standard specification for pickles.
|
KS 05-1168: 1996
|
Kenya standard specification for beet extract.
|
KS 05-1157: 1996
|
Kenya standard specification for mustard seed powder.
|
KS 05-1155: 1996
|
Kenya standard specification for whole and ground nutmeg.
|
KS 05-1154: 1996
|
Kenya standard specification for whole and ground ginger.
|
KS 05-1153: 1996
|
Kenya standard specification for coriander.
|
KS 05-1156: 1996
|
Kenya standard specification for whole and ground cloves.
|
KS 05-326: 1996
|
Kenya standard specification for edible oils and fats. (1st revision).Part 1: Shortenings and refined oils.Part 2: Vegetable ghee (vanaspali).Part 3: Mixed animal and vegetable ghee.Part 4: Edible tallow.Part 5: Lard.Part 6: Pork fat.
|
KS 05-1174: 1996
|
Kenya standard specification for canned pears.
|
KS 05-1177: 1996
|
Kenya standard specification for canned grape fruit.
|
KS 05-1179: 1996
|
Kenya standard specification for canned fruit cocktail.
|
KS 01-951: 1996
|
Kenya standard specification for soya beans.
|
KS 01-952: 1996
|
Kenya standard specification for wheat bran.
|
KS 03-1309: 1996
|
Kenya standard specification for diesel fuels.Part 1: Automotive gas oil (AGO).Part 2: Industrial diesel oil (IDO).
|
KS 03-1274: 1996
|
Kenya standard specification for epoxy paints for coffee fermentation tanks.
|
KS 03-807: 1996
|
Kenya standard specification for polishes.Part 1: Shoe polish wax solvent paste type.Part 2: Floor polish solvent type (liquid and paste).Part 3: Floor polish water emulsion buffable type.
|
KS 03-1310: 1996
|
Kenya standard specification for fuel oils.
|
KS 03-92: 1996
|
Kenya standard specification for synthetic detergents, powders for household use. (1st revision).
|
KS 03-1291: 1996
|
Kenya standard specification for butyl acetate.
|
KS 03-1292: 1996
|
Kenya standard specification for ethylacetate.
|
KS 03-1293: 1996
|
Kenya standard specification for isobutyl acetate.
|
KS 03-1296: 1996
|
Kenya standard specification for ethyl glycol.
|
KS 05-344: 1996
|
Kenya standard specification for honey. (1st revision).
|
KS 05-1311: 1996
|
Kenya standard specification for canned beans in tomato sauce (baked beans).
|
KS 05-225: 1996
|
Kenya standard specification for beer. (1st revision).
|
KS 05-459: 1996
|
Kenya standard specification for drinking water.Part 1: Specification for drinking water and containerized drinking water – (1st revision).Part 7: Specification for containerized mineral water. (1st revision).Part 9: Code of hygienic practice for the collecting, processing and labellingof natural mineral water, mineral water and bottled drinking water.
|
THE QUALITY INSPECTION OF IMPORTS ORDER
1. This Order may be cited as the Quality Inspection of Imports Order.
2. All imports to Kenya shall be subjected to quality inspection by the Kenya Bureau of Standards at the port of entry.
3. The imported commodities will be allowed into the country upon issuance of a certificate of release by the Kenya Bureau of Standards.
4. Kenya Bureau of Standards shall ensure that all products meet the requirements of Kenya Standards and Standards approved by the Bureau.
5. The quality inspection fees for the imported commodities shall be 0.2 per cent of the C. & F. value for the final products and 0.1 per cent value of raw materials and intermediate goods and shall be payable before the issuance of the certificate of release.
6. The Cabinet Secretary may on the recommendation of the Nation Standards Council, exempt any imports from the provisions of this Order where he is satisfied that it is in the national interest to do so.
7. Legal Notice No. 227 of 1995, is revoked.
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods and procedures on or after the date of publication of this Order unless the commodities and methods and procedures comply with the requirements of the relevant Kenya Standards.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 04-111: 1985
|
Part 2: Symbols (1st revision 1999).Part 3: Systems installed in clients premises (1st revision 1999).Part 4: Central stations (1st revision).Part 5: Detection devices for internal use (1st revision 1999).Part 7: Alarm transmission systems (1st revision 1999).
|
KS 04-464: 1982
|
Kenya standard specification for tubular florescent lamps (1st revision 1999).
|
KS 08-508: 1984
|
Kenya standard specification for absorbent cotton wool for medical use (1st revision 1999).
|
KS 08-585: 1985
|
Kenya standard specification for zippers (1st revision 1999).
|
KS 08-1076: 1999
|
Kenya standard specification for fishing nets.
|
KS ISO 1711
|
Kenya standard specification for hand operated wrenches and sockets-technical specifications.
|
KS ISO 3463
|
Kenya standard specification for wheeled tractors for agriculture and forestry—protective structures—dynamic test method and acceptance conditions.
|
KS ISO 5700
|
Kenya standard specification for wheeled tractors for agriculture and forestry—protective structures—static test method and acceptance conditions.
|
KS ISO 8457-1
|
Kenya standard specification for steel wire rodsPart 1: Dimensions and tolerances.
|
KS ISO 8457-2
|
Kenya standard specification for steel wire rodsPart 2: Quality requirements for un-alloyed steel wire rods for conversion to wire.
|
KS ISO 11625
|
Kenya standard specification for gas cylinders—safe handling.
|
KS 06-259: 1981
|
Kenya standard specification for mild steel water pipes (1st revision 1999).
|
KS CODEX STAN 66-1981
|
Kenya standard for table olives (1st revision 1989).
|
KS CODEX STAN 67-1987
|
Kenya standard for raisins.
|
KS CODEX STAN 116-1981
|
Kenya standard for canned carrots.
|
KS CODEX STAN 159-1981
|
Kenya standard for canned mangoes.
|
KS 05-58: 1987
|
Kenya standard sampling methods and methods of chemical analysis for sugar (3rd revision 1999).
|
KS ISO 7932: 1993
|
Kenya standard methods for micro-biological examination of food and animal feed stuffs—enumeration of bacillus cereus.
|
KS ISO 8914: 1990
|
Kenya standard methods for micro-biological examination of food and animal feed stuffs—detection of vibrio parahaemolticus.
|
KS ISO 7937: 1985
|
Kenya standard methods for micro-biological examination of food and animal feed stuffs—enumeration of clostridium perfrigens.
|
KS 05-358: 1982
|
Kenya standard specification for carbonated and non-carbonated beverages (1st revision 1999).
|
KS 05-224: 1980
|
Kenya standard specification for fruits squashes (1st revision 1999).
|
KS 05-328: 1984
|
Kenya standard specification for fruit-based soft drink (1st revision 1999).
|
KS 05-524: 1993
|
Kenya standard specification for pasta products (1st revision 1999).
|
KS 05-1516: 1999
|
Kenya standard code of hygienic practice for the handling,processing, storage and marketing of fish and fishery products.
|
KS 04-1278: 1999
|
Kenya standard specification for external television aerials in the frequency range 30 MHz to 1 GHz.
|
KS 04-1451: 1999
|
Kenya standard specification for hot-rolled copper redraw rods for electrical purposes.
|
KS 04-1430: 1999
|
Kenya standard specification for mechanical cable glands.Part 1: Metallic glands.Part 2: Polymeric mechanical glands.Part 3: Special corrosion resistant glands.Part 4: Code of practice for selection, installation and inspection of cable glands used in electrical installations.
|
KS IEC 950: 1999
|
Kenya standard specification for safety of information technology equipment, including electrical business equipment.
|
KS 03-82: 1978
|
Kenya standard specification for earthenware dinnerware (1st revision 1999).
|
KS 03-85: 1979
|
Kenya standard specification for aluminium sulphate (1st revision 1999).
|
KS 03-86: 1979
|
Kenya standard specification for sulphuric acid (1st revision 1999).
|
KS 03-87: 1980
|
Kenya standard specification for hydrochloric acid (1st revision 1999).
|
KS 03-88: 1979
|
Kenya standard specification for distilled water (1st revision 1999).
|
KS 03-89: 1979
|
Kenya standard specification for school chalks (1st revision 1999).
|
KS 03-91: 1985
|
Kenya standard specification for liquefied petroleum gases (LPG) (1st revision 1999).
|
KS 03-155: 1978
|
Kenya standard specification for sodium carbonate—technical grade (1st revision 1999).
|
KS 03-156: 1980
|
Kenya standard specification for caustic soda, pure and technical (1st revision 1999).
|
KS 03-163: 1981
|
Kenya standard colours for ready mixed paints (1st revision 1999).
|
KS 03-221: 1983
|
Kenya standard specification for lime for chemical industry (1st revision 1999).
|
KS 03-240: 1979
|
Kenya standard specification for glazed earthenware tiles (1st revision 1999).
|
KS 03-242: 1980
|
Kenya standard specification for sulphuric acid for use in lead-acid batteries (1st revision 1999).
|
KS 03-243: 1980
|
Kenya standard specification for PVC (vinyl) asbestos floor tiles (1st revision 1999).
|
KS 03-289: 1980
|
Kenya standard specification for unbacked flexible PVC floor covering (1st revision 1999).
|
KS 03-353: 1985
|
Kenya standard specification for crown finish glass bottles (1st revision 1999).
|
KS 03-375: 1982
|
Kenya standard specification for liquid carbon dioxide for industrial use (1st revision 1999).
|
KS 03-377: 1982
|
Kenya standard specification for industrial and safety rubber knee boots (1st revision 1999).
|
KS 03-378: 1983
|
Kenya standard glossary of terms relating to glass industry (1st revision 1999).
|
KS 03-379: 1982
|
Kenya standard specification for melamine plastic tableware (1st revision 1999).
|
KS 03-381: 1983
|
Kenya standard general methods of test for pesticides and their formulations (1st revision 1999).
|
KS 03-388: 1984
|
Kenya standard specification for base paper for waxed bread wrap (1st revision 1999).
|
KS 03-389: 1984
|
Kenya standard specification for waxed paper for bread wrap (1st revision 1999).
|
KS 03-390: 1983
|
Kenya standard methods of test for rubber boots (1st revision 1999).
|
KS 03-391: 1983
|
Kenya standard specification for general purpose rubber knee boots (1st revision 1999).
|
KS 03-398: 1983
|
Kenya standard specification for thermosetting plastic buttons (1st revision 1999).
|
KS 08-665: 1986
|
Kenya standard specification for textile labels (1st revision 1999).
|
KS ISO 14123-1: 1998
|
Kenya standard for safety of machinery—reduction of risks to health from hazardous substances emitted by machinery.Part 1: Principles and specifications for machinery manufacturers.
|
KS ISO 14123-2: 1998
|
Kenya standard for safety of machinery—reduction of risks to health substances emitted by machinery. Part 2: Methodology leading to verification procedures.
|
KS ISO 8759-1: 1988
|
Kenya standard for agricultural wheeled tractors—front mounted equipment.Part 1: Power take off.
|
KS ISO 8759-2: 1998
|
Kenya standard for agricultural wheeled tractors—front mounted equipment.Part 2: Front linkage.
|
KS ISO 4954: 1993
|
Kenya standard for steels for cold heading and cold extruding.
|
KS ISO 6788: 1988
|
Kenya standard for assembly tools for screws and nuts—four-way socket wrenches—dimensions and torque test.
|
KS 06-1512: 1999
|
Kenya standard for specification for general requirements for steel, carbon and high-strength low-alloy hot-rolled sheet and cold-rolled sheet.
|
KS 06-1513: 1999
|
Kenya standard for specification for steel sheet and strip, heavy- thickness coils, carbon, hot-rolled.
|
KS ISO 3779: 1995
|
Kenya standard for road vehicles—Vehicle Identification Number (VIN).
|
KS 03-315: 1981
|
Kenya standard for motor vehicle brake fluids (1st revision 1999).
|
KS 03-581: 1986
|
Kenya standard for pure petroleum jelly for human use (1st revision 1999).
|
KS 03-698: 1987
|
Kenya standard specification for liquid detergent for household hand/dish washing (1st revision 1999).
|
KS 03-1507: 1999
|
Kenya standard specification for automotive multipurpose gear lubricants (extreme pressure gear oil).
|
KS 03-1508: 1999
|
Kenya standard specification for automotive multipurpose lithium soap greases.
|
KS 03-1408: 1999
|
Kenya standard specification for dimethoate.Part 1: Technical grade.Part 2: Emulsifiable concentrates.
|
KS 03-815: 1987
|
Kenya standard specification for portable reflective warning triangles for motor vehicles (1st revision 1999).
|
KS 03-653: 1986
|
Kenya standard specification for household insecticidal aerosols (1st revision 1999).
|
KS 03-578: 1986
|
Kenya standard specification for nail polish (1st revision 1999).
|
KS 03-1473: 1999
|
Kenya standard specification for lipstick.
|
KS ISO-11418: 1996
|
Kenya standard specification for containers and accessories for pharmaceutical preparations.Part 1: Drop-dispensing bottles.Part 2: Screw-neck bottles for syrups.Part 3: Screw-neck bottle (veral) for solid and liquid dosage forms.Part 4: Table bottles.Part 5: Dropper assemblies.
|
KS 03-03: 1976
|
Kenya standard specification for trimmed sizes of paper for writing and printing (1st revision 1999).
|
KS 03-04: 1976
|
Kenya standard specification for substances of paper and board (1st revision 1999).
|
KS 03-23: 1976
|
Kenya standard specification for mailing envelopes (1st revision 1999).
|
KS 03-45: 1977
|
Kenya standard method of analysis for soap (1st revision 1999).
|
KS 03-400: 1983
|
Kenya standard specification for acetic acid (1st revision 1999).
|
KS 03-421: 1987
|
Kenya standard specification for newsprint (1st revision 1999).
|
KS 03-484: 1984
|
Kenya standard specification for carbon paper (1st revision 1999).
|
KS 03-513: 1985
|
Kenya standard specification for glass tableware (1st revision 1999).
|
KS 03-517: 1984
|
Kenya standard specification for ball point pens (1st revision 1999).
|
KS 03-575: 1985
|
Kenya standard specification for corrugated fibreboard boxes (1st revision 1999).
|
KS 03-275
|
Kenya standard specification for motor gasolines (petrol or spirit).Part 1: Leaded petrol.Part 2: Unleaded petrol.
|
KS 08-1434
|
Kenya standard specification for coated tarpaulin fabrics.
|
KS 08-1435
|
Kenya standard specification for coated fabric for shoes.
|
KS 08-1532
|
Kenya standard code of practice for inspection and acceptance criteria for used textile products (mitumba).Part 1: Garments.
|
KS 08-1533: 1999
|
Kenya standard code of practice for inspection and acceptance criteria for used footwear.
|
KS 04-1386
|
Kenya standard specification for flashlights.
|
KS 04-1450
|
Kenya standard specification for lamps for flashlights.
|
THE STANDARDS (NO. 1) ORDER, 2001
1. |
This Order may be cited as the Standards (No. 1) Order, 2001.
|
2. |
The Kenya Standard having been declared as set out in the first and second column of the Schedule, no person shall manufacture or sell the commodity or use the methods and procedures on or after the date of publication of this Order unless the commodity or methods or procedures comply with the requirement of the relevant Kenya Standard.
|
SCHEDULE
Number
|
Code of practice
|
KS-1515:2000
|
Kenya standard code of practice for inspection of road vehicles
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya standards having been declared as set out in the first and second columns of the Schedule, no person shall manufacture or sell the commodities or use the methods or procedures on or after forty-two (42) days of the date of publication of this Order unless the commodities, methods or procedures comply with the requirements of the relevant Kenya Standard.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS ISO 3527/2000
|
Kenya standard specification for oil of parsley fruits (Petroselinum sativum hoffm).
|
KS ISO 3714/1976
|
Kenya standard specification for oil of pennyroyal.
|
KS ISO 3757/1978
|
Kenya standard specification for oil of patchouli.
|
KS ISO 8773/1991
|
Kenya standard specification for polypropylene (PP) pipes and fittings for buried drainage and sewerage systems —specifications
|
KS ISO 7165/1999
|
Kenya standard specification for fire fighting—portable fire extinguishers—performance and construction.
|
KS ISO 11601/2002
|
Kenya standard specification for wheeled fire extinguishers —performance and construction.
|
KS ISO 3761/1997
|
Kenya standard specification for oil of rosewood, Brazilian type [Anibarosaeodora Ducke var.amazonica Ducke or Aniba parviflora (Meissner) Mez].
|
KS ISO 3760/1979
|
Kenya standard specification for oil of celery seed.
|
KS ISO 3523/1976
|
Kenya standard specification for oil of canaga.
|
KS ISO 3217/1974
|
Kenya standard specification for oil of lemongrass (Cymbopogon citrates).
|
KS 1669/2001
|
Kenya standard specification for cosmetic and air freshener aerosols.
|
KS 1569/2001
|
Kenya standard specification for cosmetic pencils.
|
KS 1618/2001
|
Kenya standard code of practice for grading and preservation of raw crocodile and alligator skins.Part 1: By stack salting.
|
KS ISO 8242/2001
|
Kenya standard specification for polypropylene (pp) valves for pipes under pressure—basic dimensions—metric series.
|
KS 1607/2001
|
Kenya standard specification for wooden packaging cases.
|
KS ISO 3516/1997
|
Kenya standard specification for oil of coriander fruits (Coriandrum sativum L.).
|
KS ISO 12480-1/1997
|
Kenya standard specification for cranes—safe use.Part 1: General
|
KS ISO 3475/1975
|
Kenya standard specification for oil of aniseed.
|
KS ISO 3214/2000
|
Kenya standard specification for oil of Litsea cubeba (Litsea cubeba pers).
|
KS ISO 3518/1979
|
Kenya standard specification for oil of sandalwood (Santalum album Linnaeus).
|
KS ISO 7-1/1994
|
Kenya standard specification for pipe threads where pressure-tight joints are made on the threads.Part 1: Dimensions, tolerances and designation.
|
KS ISO 13563-1/2001
|
Kenya standard specification for single side loading fork-lift trucks.Part 1: Stability tests.
|
KS ISO 9926-1/1990
|
Kenya standard specification for cranes—training of drivers.Part 1: General.
|
KS ISO 7-2/2000
|
Kenya standard specification for pipe threads where pressure-tight joints are made on the threads.Part 2: Verification by means of limit gauges.
|
KS ISO 3528/1997
|
Kenya standard specification for oil of mandarin, Italian type (Citrus reticulata blanco).
|
KS ISO 885/2000
|
Kenya standard specification for general purpose bolts and crews—metric series—radii under the head.
|
KS ISO 65/1981
|
Kenya standard specification for carbon steel tubes suitable for screwing in accordance with ISO 7-1.
|
KS ISO 888/1976
|
Kenya standard specification for bolts, screws and studs—nominal lengths and thread lengths for general purpose bolts.
|
KS ISO 2604-2/1975
|
Kenya standard specification for steel products for pressure purposes— quality requirements.Part 2: Wrought seamless tubes.
|
KS ISO 2604-3/1975
|
Kenya standard specification for steel products for pressure purposes—quality requirements.Part 3: Electric resistance and induction-welded tubes.
|
KS ISO 7279/1984
|
Kenya standard specification for polypropylene (pp) fittings for pipes under pressure—sockets for fusion using heated tools— metric series—dimensions of sockets.
|
KS ISO 7671/1991
|
Kenya standard specification for polypropylene (pp) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings—specifications.
|
KS ISO 3519/1997
|
Kenya standard specification for oil of lime (Citrus aurantifolia (christm) swingle), obtained by distillation.
|
KS ISO 3520/1998
|
Kenya standard specification for oil of bergamot [citrus aurantium L. subsp. Bergamia (Wight et Arnott) Engler], Italian type.
|
KS ISO 3517/1975
|
Kenya standard specification for oil of neroli.
|
KS ISO 3526/1991
|
Kenya standard specification for oil of sage (Salvia lavandulifolia).
|
KS ISO 3525/1979
|
Kenya standard specification for oil of amyris.
|
KS ISO 3524/1977
|
Kenya standard specification for oil of cinnamon leaf.
|
KS 179-2/2001
|
Kenya standard specification for non-metallic conduits and fittings used in electrical installations.Part 2: Fittings (2nd revision, 2001).
|
KS 1059/2001
|
Kenya standard specification for general requirements for apparatus for connection to the public switched telephone networks.Part 1: General requirements.
|
KS 472/2001
|
Kenya standard specification for lamp holders for tubularfluorescent lamps and starter holders (1st revision, 2001).
|
KS 1590/2001
|
Kenya standard specification for siting of radio communication facilities.Part 1: Low frequency, medium frequency and high frequency ransmitting and high frequency receiving facilities.Part 2: Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz.
|
KS 1625/2001
|
Kenya standard specification for voltage bands for electrical installations in buildings.
|
KS 1666/2001
|
Kenya standard specification for alarm systems for road vehicles—passenger cars.
|
KS 184-3/2001
|
Kenya standard specification for primary batteries.Part 3: Watch batteries.
|
KS 184-4/2001
|
Kenya standard specification for primary batteries.Part 4: Safety standard for lithium batteries.
|
KS ISO IEC 12119/1994
|
Kenya standard specification for information technology—software packages—quality requirements and testing
|
KS 662-4/2001
|
Kenya standard specification for wiring regulations.Part 4: Protection for safety.
|
KS ISO IEC 12119/1994
|
Kenya standard specification for information technology—software packages—quality requirements and testing.
|
KS IEC 60947-4-1/1996
|
Kenya standard specification for low-voltage switch gear.Part 4: Contactors and motor-starters.Section 1: Electromechanical contractors and motor-starters.
|
KS IEC 60947-4-2/1995
|
Kenya standard specification for low-voltage switch gear.Part 4: Contactors and motor-starters.Section 2: A. C. semi-conductor motor controllers and starters.
|
KS IEC 60947-4- 3/1999
|
Kenya standard specification for low-voltage switch gear.Part 4: Contactors and motor-starters.Section 3: A.C. Semi-conductor controllers and contactors for non-motor loads.
|
KS 1588-1/2001
|
Kenya standard specification for telecommunications installations.Part 1: Integrated telecommunications cabling systems for commercial premises.
|
KS 1588-2/2001
|
Kenya standard specification for telecommunications installations.Part 2: Telecommunications pathways and spaces for commercial buildings.Part 3: Integrated telecommunications cabling systems for small office/ residential premises.
|
KS 1588-3/2001
|
Kenya standard specification for telecommunications installations.
|
KS 1590-1/2001
|
Kenya standard specification for siting of radio communication facilities.Part 1: Low frequency, medium frequency and high frequency transmitting and high frequency receiving facilities.
|
KS 1590-3/2001
|
Kenya standard specification for siting of radio communication facilities.Part 2: Guidelines for fixed, mobile and broadcasting services at frequencies above 30 MHz.
|
KS 1590-3/2001
|
Kenya standard specification for siting of radio communication facilities.Part 3: Fixed location satellite earth stations.
|
KS ISO IEC 9595/1998
|
Kenya standard specification for open systems interconnection— common management information services.
|
KS 1535-8/2001
|
Kenya standard specification for glass for use in buildings.Part 8: specification for safety glazing materials.
|
KS 1494/2001
|
Kenya standard specification for code of practice for storage and on-site treatment of solid waste from buildings.
|
KS 1609/2001
|
Kenya standard specification for standard sand for the testing of cement.
|
KS 1605/2001
|
Kenya standard specification for hardwood poles, droppers, laths, guardrail posts and spacer blocks.
|
KS 1606/2001
|
Kenya standard specification for wood blocks for floors.
|
KS 831/2001
|
Kenya standard specification for refractory bricks and shapes.Part 1: Fireclay bricks and shapes.Part 2: Insulating bricks and shapes.Part 3: High alumina bricks and shapes.Part 4: Silica bricks and shapes.Part 5: Magnesite, chrome bricks and shapes.
|
KS 1027-1/2001
|
Kenya standard specification for auto refinishing paints.Part 1: synthetic resin-based (1st revision, 2001).
|
KS 1027/2001
|
Kenya Standard specification for auto refinishing paints.
|
KS ISO 3262-4/1998
|
Kenya standard specification for extenders for paints— specifications and methods of test.Part 4: Whiting.
|
KS ISO 4226/1993
|
Kenya standard specification for air quality—general aspects— units for measurement.
|
KS 1SO 3930/2000
|
Kenya standard specification for road vehicles—instruments for measuring vehicle exhaust emissions.
|
KS ISO 6148/1993
|
Kenya standard specification for photography—film dimensions micrographics.
|
KS ISO 3772/2000
|
Kenya standard specification for photography—rolls of sensitized material for the pre-press industry—dimensions and related requirements.
|
KS ISO 686/1985
|
Kenya standard specification for photography 35 mm filmstrips—specifications for double-frame and single- frame formats.
|
KS ISO 732/2000
|
Kenya standard specification for photography—120 size and 220- size films—dimensions.
|
KS ISO 1008/1992
|
Kenya standard specification for photography—paperdimensions—pictorial sheets.
|
KS ISO 1009/2000
|
Kenya standard specification for photography—paperdimensions—rolls for printers.
|
KS ISO 1012/1998
|
Kenya standard specification for photography—films in sheets and rolls for general use—dimensions.
|
KS ISO 3665/1996
|
Kenya standard specification for photography—intra-oral dental radiographic film—specification.
|
KS ISO 1007/2000
|
Kenya standard specification for photography—135-size film and magazine—specifications.
|
KS 422/2001
|
Kenya standard specification for exercise books.
|
KS 1695/2001
|
Kenya standard specification for solvent emulsion degreasers.
|
KS 1696/2001
|
Kenya standard specification for detergent for industrial dishwashing equipment.
|
KS 1581-1/2001
|
Kenya standard specification for thermoplastic dustbins and lids.Part 1: Thermoplastic dustbin.
|
KS 1581-2/2001
|
Kenya standard specification for thermoplastic dustbins and lids.Part 2: Plastic and rubber dustbins lids.
|
KS 512/2001
|
Kenya standard specification for rubber-based flooring tiles (1st revision, 2001).
|
KS 511-3/2001
|
Kenya standard specification for plastic containers.Part 3: Plastic bottles (up to 5 liters).
|
KS ISO 2000/1989
|
Kenya standard specification for rubber, raw natural—specification.
|
KS 1524-2/2001
|
Kenya standard specification for gloves.Part 2: Disposable examination and surgical gloves.
|
KS 1527/2001
|
Kenya standard specifications for mouth wash preparations.
|
KS 1571/2001
|
Kenya standard specification for cologne.
|
KS 1570/2001
|
Kenya standard specification for skin powders.Part 1: Body and face powders.
|
KS 1572/2001
|
Kenya standard specification for chemical depilatories.
|
KS 1604/2001
|
Kenya standard specification for henna powder.Part 1: Pure henna powder.
|
KS 1707/2001
|
Kenya standard specification for labeling of cosmetic products.
|
KS ISO 3140/1990
|
Kenya standard specification for oil of sweet orange [Citrussinensis (Linnaeus) obsbeck], obtained by mechanical treatment.
|
KS ISO 3065/1974
|
Kenya standard specification for oil of Australian eucalyptus, 80 to 85% cineole content.
|
KS ISO 3064/2001
|
Kenya standard specification for oil of petitgrain, Paraguayan type (Citrus aurantium L. ssp. Aurantium, syn. Citus aurantium L. ssp. Amara var pumilia).
|
KS ISO 3063/1983
|
Kenya standard specification for oil of Ylang-Ylang [cananga odorata (Lamark,) D. Hooker and Thomson].
|
KS ISO 3061/1979
|
Kenya standard specification for oil of black pepper.
|
KS ISO 3054/1987
|
Kenya standard specification for oil of [La vandula latifolia (linnaeusf.) medikus], France.
|
KS ISO 3053/1975
|
Kenya standard specification for oil of grape fruit (obtained by expression).
|
KS ISO 3044/1997
|
Kenya standard specification for oil of eucalyptus cirio-dora hook.
|
KS ISO 3043/1975
|
Kenya standard specification for oil of pimento berry.
|
KS ISO 1342/2000
|
Kenya standard specification for oil of rosemary (Rosmarinus officinalis L).
|
KS ISO 3033/1988
|
Kenya standard specification for oil of spearmint (Mentha spicata Linnaeus).
|
KS ISO 856/1981
|
Kenya standard specification for oil of peppermint, France, Italy, United Kingdom and U.S.A.
|
KS ISO 855/1981
|
Kenya standard specification for oil of lemon, Italy, obtained by expression.
|
KS ISO 770/1980
|
Kenya standard specification for oil of eucalyptus globules.
|
KS ISO 590/1981
|
Kenya standard specification for oil of Brazilian sassafras.
|
KS ISO 4785/1987
|
Kenya standard specification for laboratory glassware—straight-bore glass stopcocks for general purposes.
|
KS ISO 4796/2000
|
Kenya standard specification for laboratory glassware—bottles.
|
KS ISO 4797/1981
|
Kenya standard specification for laboratory glassware—flasks with conical ground joints.
|
KS ISO 4799/1978
|
Kenya standard specification for laboratory glassware— condensers.
|
KS ISO 4803/1978
|
Kenya standard specification for laboratory glassware—borosilicate glass tubing.
|
KS ISO 4800/1998
|
Kenya standard specification for laboratory glassware—separating funnels and dropping funnels.
|
KS ISO 6556/1981
|
Kenya standard specification for laboratory glassware—filer flasks.
|
KS ISO 1773/1997
|
Kenya standard specification for laboratory glassware—narrow-necked boiling flasks.
|
KS ISO 1772/1975
|
Kenya standard specification for laboratory crucibles in porcelain and silica.
|
KS ISO 1775/1975
|
Kenya standard specification for porcelain laboratory apparatus—requirements and methods of test.
|
KS ISO 4142/1997
|
Kenya standard specification for laboratory glassware—test tubes and culture tubes.
|
KS 24/2001
|
Kenya standard specification for toilet paper (3rd revision, 2001).
|
KS ISO 1237/1981
|
Kenya standard specification for mustard seed—specification.
|
KS ISO 6576/1984
|
Kenya standard specification for laurel (Laurus nobilis L.)—whole and pounded leaves—specification.
|
KS ISO 5561/1990
|
Kenya standard specification for black caraway and blond caraway (Carum carvi l.) —whole—specification.
|
KS ISO 6574/1986
|
Kenya standard specification for celery seed (Apium graveolens l.)—specifications.
|
KS ISO 2256/1984
|
(Mentha spicata linaeus syn. Menthe viridis linaeus)— specifications.
|
KS ISO 3632-1/2001
|
Kenya standard specification for saffron (crocus sativusPart 1: Specification.
|
KS 319/2001
|
Kenya standard specification for sugar confectionery.Part 3: Chewing gum and bubble gum (2nd revision, 2001).
|
KS 612/2001
|
Kenya standard specification for whisky (1st revision, 2001).
|
KS 608/2001
|
Kenya standard specification for neutral spirit for manufacture of alcoholic beverages (1st revision, 2001).
|
KS CODEX STAN 146
|
Kenya standard specification for general standard for the labeling and claims for prepackaged foods for special dietary uses.
|
KS CODEX STAN 09
|
Kenya standard specification for general standard for the addition of essential nutrients to foods.
|
KS ISO 7703/1995
|
Kenya standard specification for dried peaches—specification and test methods.
|
KS 1551/2001
|
Kenya standard code of practice for handling and distribution of fresh fruits and fresh fruit products.
|
KS ISO 4251-1/1998
|
Kenya standard specification for tyres (ply rating marked series) and rims for agricultural tractors and machines.Part 1: Tyre designation and dimensions, and approved rim contours.
|
KS ISO 4251-2/1998
|
Kenya standard specification for tyres (ply rating marked series) and rims for agricultural tractors and machines.Part 2: Type load ratings.
|
KS ISO 42-3/1994
|
Kenya standard specification for tyres (ply rating marked series) and rims for agricultural tractors and machines.Part 3: Rims.
|
KS ISO 3789-1/1982
|
Kenya standard specification for tractors, machinery for agriculture and forestry, powered lawn and garden equipment—location and method of operation of operation controls.Part 1: Common controls.
|
KS ISO 3789-2/1982
|
Kenya standard specification for tractors, machinery for agriculture and forestry, powered lawn and garden equipment—location and method of operation of operator controls.Part 2: Controls for agricultural tractors and machinery.
|
KS ISO 3767-1/1998
|
Kenya standard specification for tractors, machinery for Agriculture and forestry, lawn and garden equipment—symbols for operator controls and other displays.Part 1: Common symbols.
|
KS ISO 3767-2/1991
|
Kenya standard specification for tractors, machinery for agriculture and forestry, powered lawn and garden equipment—symbols for operator controls and other displays.Part 2: Symbols for agricultural tractors and machinery.
|
KS ISO 3600/1996
|
Kenya standard specification for tractors, machinery for agriculture and forestry, powered lawn and garden equipment operators and manuals—content and presentation.
|
KS 4004/1983
|
Kenya standard specification for agricultural tractors and machinery—track widths.
|
KS ISO 5707/1996
|
Kenya standard milking machine installations—construction and performance.
|
KS ISO 5708/1983
|
Kenya standard specification for refrigerated bulk milk tanks.
|
KS 1647/2001
|
Kenya standard specification for code of practice for animal feed processing storage and distribution.
|
KS 154/2001
|
Kenya standard specification for fully forged plain and fork hoes (jembes) (3rd revision, 2001).
|
KS 74/2001
|
Kenya standard specification for crow-bars and claw-bars.
|
KS 09-3/2000
|
Kenya standard specification for low carbon steel gas cylinders exceeding 5 liters water capacity for low pressure liquefiable gas.Part 3: Code of practice for filling, distribution and retailing of liquefied petroleum gas cylinders (1st revision, 2000).
|
KS 1453/2000
|
Kenya standard specification for test probes to verify protection by enclosures.
|
KS 890/2000
|
Kenya standard specification for classification of degrees of protection provided by enclosures (1st revision, 2000).
|
KS 1111/2000
|
Kenya standard specification for safety of household and similar electrical appliances.Part 1: Particular requirements for microwave ovens.Part 6: Particular requirements for toasters, grills roasters and similar appliances.
|
KS IEC 60282-2/1997
|
Kenya standard specification for high-voltage fuses.Part 2: Expulsion fuses.
|
KS 1502/2000
|
Kenya standard specification for electro-mechanical all-or-nothing relays.Part 5: Dimensions for general purpose all-or nothing relays.
|
KS 1504/2000
|
Kenya standard specification for limits and methods ofmeasurements of radio disturbance characteristics of electrical lighting and similar equipment.
|
KS 1505/2000
|
Kenya standard specification for radio interference characteristics of overhead power lines and high-voltage equipment.Part 1: Description of the phenomenon.Part 2: Methods of measurement and procedure for determining limits.
|
KS 1589/2000
|
Kenya standard specification for safety practices in the operation and maintenance of radio transmitters and similar equipment.
|
KS 1511/2000
|
Kenya standard specification for chemical hair relaxes and hair waving products.
|
KS 1528/2000
|
Kenya standard specification for nail polish removers.Part 1: Solvent-based.
|
KS 1529/2000
|
Kenya standard specification for pomades and solid brilliantines.
|
KS 1524/2000
|
Kenya standard specification for gloves.Part 3: Artificial insemination (A.I.) gloves.
|
KS 917/2000
|
Kenya standard specification for after-shave preparations.Part 1: Lotions.
|
KS 1568/2000
|
Kenya standard specification for sterile hypodermic syringes for single use only.Part 1: Sterile hypodermic syringes for manual use only.
|
KS ISO 6710/1995
|
Kenya standard specification for single use containers for venous blood specimen collection.
|
KS ISO 15223/1999
|
Kenya standard specification for medical devices—symbols to be used with medical device labels, labeling and information to be supplied.
|
KS ISO 8009-9/1985
|
Kenya standard for re-usable rubber contraceptive diaphragm.Part 9: Packaging and labeling.
|
KS CODEX STAN 62/1981
|
Kenya standard specification for canned strawberries.
|
KS CODEX STAN 188/1983
|
Kenya standard specification for baby corn.
|
KS 1552/2000
|
Kenya standard code of hygienic practice for production, handling and distribution of milk and milk products.
|
KS 543/2000
|
Kenya standard specification for embroidery threads.Part 1: Cotton embroidery-threads (1st revision, 2000).
|
KS 507/2000
|
Kenya standard specification for sanitary towels Incorp. Am. No. 1: 2001.Part 1: Sanitary towels for external use (1st revision, 2000).
|
KS 1534/2000
|
Kenya standard specification for menstrual tampons.
|
KS 1305/2000
|
Kenya standard specification for mosquito netting.Part 1: Round mesh cotton netting.
|
KS 416/2000
|
Kenya standard specification for knitted polyester fabrics (1st revision, 2000).
|
KS 417/2000
|
Kenya standard specification for knitted polyester /cellulosic blended fabric (1st revision, 2000).
|
KS 1393/2000
|
Kenya standard specification for bales.Part 1: Dimensions and density of cotton bales.Part 2: Dimensions of bales of man-made fibres.
|
KS 1620/2000
|
Kenya standard specification for bathroom slippers.
|
KS 1623/2000
|
Kenya standard code of practice for the grading of raw hides and skins.Part 1: Bovine hides.
|
KS 476/2000
|
Kenya standard specification for uncoated aluminum hollow-ware utensils.Part 1: Domestic aluminum cooking pot sufuria and lids.
|
KS ISO 4190-1/1990
|
Kenya standard specification for lifts (U.S.elevator) installation.Part 1: Class I, II, III and IV lifts.
|
KS ISO 4190-2/1982
|
Kenya standard specification for passenger lifts and service lifts.PART 2: Lifts of class IV.
|
KS ISO 4190-3/1982
|
Kenya standard specifications for passenger lift installations.Part 3: Service lifts class V.
|
KS ISO 4190-5/1987
|
Kenya standard specification for lifts and service lifts (U.S.A. elevators and dumbwaiters).Part 5: Control devices, signals and additional fittings.
|
KS ISO 4190-6/1984
|
Kenya standard specification for lifts and service lifts (U.S.A. elevators and dumbwaiters).Part 6: Passenger lifts to be installed in residential buildings—planning and selection.
|
KS ISO 9712/1992
|
Kenya standard specification for non-destructive testing—qualification and certification of personnel.
|
KS ISO 11118/1999
|
Kenya standard specification for gas cylinders—non-refillable metallic gas-cylinders—specification and test methods.
|
KS ISO 3807/1980
|
Kenya standard specification for cylinders for acetylene—basic requirements.Part 1: Cylinders without fusible plugs.Part 2: Cylinders with fusible plugs.
|
KS 149/2000
|
Kenya standard specification for pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) for water supply (2nd revision, 2000).Part 1: General requirements.Part 2: Dimensions, nominal outside diameters, wall thickness and nominal pressures (metric series).
|
KS ISO 3443-1/1979
|
Tolerances for building.Part 1: Basic principles for evaluation and specification.
|
KS ISO 10545/1995
|
Kenya standard specification for ceramic tiles.
|
KS ISO 1251/2000
|
Kenya standard specification for un-reinforced concrete—porous pipes for under-drainage.
|
KS 774/2000
|
Kenya standard specification for road speed bumps.
|
KS 1555/2000
|
Kenya standard specification for gully tops and manhole tops for vehicular and pedestrian areas.
|
KS 1554/2000
|
Kenya standard specification for inspection chambers.
|
KS 1610/2000
|
Kenya standard specification for road marking material—drop on materials—glass beads, antiskid aggregates and mixtures of the two.
|
KS 1537/2000
|
Kenya standard code of practice for laying precast concrete flags, kerbs, channels, edgings and quadrants.
|
KS 829/2000
|
Kenya standard specification for precast concrete flags, kerbs, channels, edgings and quadrants.
|
KS 1535/2000
|
Kenya standard specification for glass for use in building.Part 2: Specification for float glass.Part 3: Specification for polished wire glass.Part 4: Specification for drawn sheet glass.Part 5: Specification for patterned glass.Part 6: Specification for wired patterned glass.
|
KS 1516/2000
|
Kenya standard specification for code of hygienic practice for the handling, processing, storage and the placing on the market of fish and fishery products (1st revision, 2000).
|
KS 1544/2000
|
Kenya standard specification for fresh cauliflower.
|
KS ISO 1496
|
Kenya standard specification for freight containers—specification and testing.
|
KS ISO 1496-1/1990
|
Part 1: General cargo containers for general purposes.
|
KS ISO 1496-2/1996
|
Part 2: Thermal containers.
|
KS ISO 1496-3/1995
|
Part 3: Tank containers for liquids, gases and pressurized dry bulk.
|
KS ISO 1496-4/1991
|
Part 4: Non-pressurized containers for dry bulk.
|
KS IOS 4209-1/1993
|
Kenya standard specification for truck and bus tyres and rims (metric series).Part 1: Tyres.
|
KS 46/2000
|
Kenya standard specification for granulated superphosphate fertilizers (1st revision 2000).
|
KS ISO 1161/1985
|
Kenya standard specification for series 1 freight containers—corner fittings.
|
KS ISO 8323/1985
|
Kenya standard specification for containers air/surface (Intermodal) general purpose containers-specification and tests.
|
KS ISO 668/1995
|
Kenya standard specification for series I freight containers— classification, dimensions and ratings.
|
KS ISO 6346/1995
|
Kenya standard specification for freight containers—coding, identification and marking.
|
KS ISO 5906/1980
|
Kenya standard specification for gymnastic equipment surfaces for floor exercises—mats.
|
KS ISO 5905/1980
|
Kenya standard specification for gymnastic equipment—landing mats (2,000 mm x 1,250 mm x 60 mm).
|
KS ISO 5904/1981
|
Kenya standard specification for gymnastic equipment—landing mats and surfaces for floor exercises—determination of resistance to slipping.
|
KS ISO 5903/1981
|
Kenya standard specification for gymnastic equipment—landing mats and surfaces for floor exercises—determination of hardness and impact damping.
|
KS 1623/2000
|
Kenya standard specification for code of practice for the grading of raw hides and skins.Part 2: Caprine ovine skin.
|
KS 1600/2000
|
Kenya standard specification for polyolefin bags for salt.
|
KS 481/2000
|
Kenya standard specification for woven bags (natural fibres) for seeds.
|
KS 132/2000
|
Kenya standard specification for woven bags made from natural fibres for cereals and pulses (2nd revision 2000).
|
KS ISO 8421/
|
Kenya standard specification for fiber protection vocabulary.
|
KS ISO 8421-2/1987
|
Part 2: Structural fire protection.
|
KS ISO 8421-3/1989
|
Part 3: Fire detection and alarm.
|
KS ISO 8421-4/1990
|
Part 4: fire extinction equipment.
|
KS ISO 8421-5/1987
|
Part 5: Smoke control.
|
KS ISO 8421- 6/1987.
|
Part 6: Evacuation and means of escape.
|
KS ISO 8421-7/1987
|
Part 7: Explosion detection and suppression means.
|
KS ISO IEC 17025/1999
|
Kenya standard specification for general requirements for the competence of testing and calibration laboratories.
|
KS ISO 9657/1989
|
Kenya standard specification for pliers and nippers for electronics—general technical requirements.
|
KS ISO 9243/1988
|
Kenya standard specification for pliers and nippers—carpenter’s pincers—dimensions and test values.
|
KS ISO 9242/1988
|
Kenya standard specification for pliers and nippers—construction worker’s pincers—dimensions and test values.
|
KS ISO 8976/1988
|
Kenya standard specification for pliers and nippers—multiple slip joint pliers—dimensions and test values.
|
KS ISO 5749/1988
|
Kenya standard specification for pliers and nippers—diagonal cutting nippers—dimensions and test values.
|
KS ISO 5748/1988
|
Kenya standard specification for pliers and nippers—end cutting nippers—dimensions and test values.
|
KS ISO 5747/1995
|
Kenya standard specification for pliers and nippers—lever assisted side cutting pliers, end and diagonal cutting nippers—dimension and test values.
|
KS ISO 5746/1988
|
Kenya standard specification for pliers and nippers—engineer’s and lineman’s pliers—dimensions and test values.
|
KS ISO 5745/1988
|
Kenya standard specification for pliers and nippers—pliers for gripping and manipulating—dimensions and test values.
|
KS 5743/1988
|
Kenya standard specification for pliers and nippers—general technical requirements.
|
KS ISO 3574/1986
|
Kenya standard specification for cold—reduced carbon steel sheet of commercial and drawing qualities.
|
KS ISO 6787/1995
|
Kenya standard specification for assembly tools for screws and nuts—adjustable wrenches—width across flats up to 50 mm.
|
KS ISO 11450/1999
|
Kenya standard equipment for harvesting and conservation—round balers—terminology and commercial specifications.
|
KS ISO 1085/1985
|
Kenya standard assembly tools for screws and nuts—double ended wrenches—size pairing.
|
KS ISO 14122/1999
|
Kenya standard specification for safety of machinery—permanent means of access to machines and industrial plants.
|
KS ISO 14122-1/1999
|
Part 1: Choice of a fixed means of access between two levels.
|
KS ISO 14122-2/1999
|
Part 2: Working platforms and walkways.
|
KS ISO 14122-3/1999
|
Part 3: Stairways, stepladders and guard-rails.
|
KS ISO 14122-4/1999
|
Part 4: Fixed ladders.
|
KS 1064/2000
|
Kenya standard specification for non-pressure stoves.
|
KS 1063/2000
|
Kenya standard specification for paraffin lighting appliances for domestic use.
|
KS ICE/CISPR25/1995
|
Kenya standard specification for limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles.
|
KS IEC/CISPR 12/1997
|
Kenya standard specification for vehicles, motorboats, and spark ignited engine-driven devices—radio disturbance characteristics—limits and methods of measurement.
|
KS ISO 9060/1990
|
Kenya standard specification and classification for solar energy instruments for measuring hemispherical solar radiation and direct solar radiation.
|
KS IEC 61558/1998
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.
|
KS IEC 61558/1998
|
Part 2-3: Particular requirements for ignition transformers for gas and oil burners.
|
KS IEC 61558/1999
|
Part 2-8: Particular requirements for bell and chime transformers.
|
KS IEC 61558/1999
|
Part 2-13: Particular requirements for auto-transformers for general use.
|
KS IEC 61558/1999
|
Part 2-15: Particular requirements for isolating transformers for the supply of medical locations.
|
KS IEC 61558/1999
|
Kenya standard specification for safety of power transformers, power supply units and similar devices.
|
KS 1624/2000
|
Kenya standard specification for current transformers.
|
KS 1626/2000
|
Kenya standard specification for jets fans and regulators.
|
KS ISO 2775/1977
|
Kenya standard specification for office machines and printing machines used for information processing—widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons.
|
KS ISO 3527/2000
|
Kenya standard specification for adding machines-layout of function keyboard.
|
KS ISO 3791/1976
|
Kenya standard specification for office machines and data processing equipment—keyboard layouts for numeric applications.
|
KS IEC 60704-1/1997
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 1: General requirements.
|
KS IEC 60704-2-11/1998
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2-11: Particular requirements for electrically-operated food preparation appliances.Part 3: Procedure for determining and verifying declared noise emission values.
|
KS IEC 60704-2-8/1997
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for electric shavers.
|
KS IEC 60704-2-7/1997
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for fans.
|
KS IEC 60704-2-6/1994
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for tumble-dryers.
|
KS IEC 60704-2-5/1989
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: particular requirements for room heaters of the storage type.
|
KS IEC 60704-2-4/1989
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: particular requirements for washing machines and spin extractors.
|
KS IEC 60704-2-3/1987
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for dishwashers.
|
KS IEC 60704-2-2/1985
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for forced draught convection heaters.
|
KS IEC 60704-2-1/1984
|
Kenya standard specification for household and similar electrical appliances—test code for the determination of airborne acoustical noise.Part 2: Particular requirements for vacuum cleaners.
|
KS 453/2000
|
Kenya standard specification for PVC-insulated cables (non-armoured) for electric power and lighting (2nd revision, 2000).
|
KS 1641/2000
|
Kenya standard specification for direct current and low-frequency electronic measuring instruments with a digital display.
|
KS 1602/2000
|
Kenya standard specification for electrode holders.
|
KS 1603/2000
|
Kenya standard specification for coupling devices for welding cables.
|
KS 1601/2000
|
Kenya standard specification for welding power sources for industrial and professional use.
|
KS IEC 60947/1999
|
Kenya standard specification for low-voltage switchgear and controlgear.
|
KS IEC 60947-1/1999
|
Part 1: General requirements.
|
KS IEC 60947-2/1998
|
Part 2: Circuit breakers.
|
KS IEC 60947
|
Part 3: Switches, disconnectors, switch disconnectors and fuse combinations.
|
KS CODEXAlimentarius Volume 3/1995
|
Kenya standard specification for residues of veterinary drugs in foods.
|
KS 1560/2000
|
Kenya standard specification for code of general hygienic practice for the horticultural food industry.
|
KS 592/2000
|
Kenya standard specification for cigarettes (1st revision, 2000).
|
KS 1643/2000
|
Kenya standard specification for frozen octopus.
|
KS 1054/2000
|
Kenya standard specification for glucose-based energy drinks.
|
KS 346/2000
|
Kenya standard specification for baking power (1st revision, 2000).
|
KS 426/2000
|
Kenya standard specification for custard power (1st revision, 2000).
|
KS 54/2000
|
Kenya standard specification for infant food formula (2nd revision, 2000).
|
KS 285/2000
|
Kenya standard specification for milk-based baby foods (1st revision, 2000).
|
KS 349/2000
|
Kenya standard specification for processed cereal-based foods for infants and children (1st revision, 2000).
|
KS ISO 5530/1997
|
Kenya standard specification for wheat flour—physical characteristics of doughs.
|
KS 1650/2000
|
Kenya standard specification for ostrich feeds.
|
KS 1487/2000
|
Kenya standard code of practice for aquaculture.
|
KS CODEX STAN 115/1981
|
Kenya standard specification for pickled cucumbers.
|
KS CODEX STAN 121/1981
|
Specification for concentrated blackcurrant juice preserved exclusively by physical means.
|
KS 1652/2000
|
Kenya standard code of hygienic practices on commercial fishing vessels.
|
KS CODEX STAN 83/1981
|
Kenya standard specification for concentrated grape juice reserved exclusively by physical means.
|
KS CODEX STAN 110/1981
|
Kenya standard specification for quick frozen broccoli.
|
KS CODEX STAN 41/191
|
Kenya standard specification for quick frozen peas.
|
KS CODEX STAN 68/1981
|
Kenya standard specification for canned mandarin oranges.
|
KS CODEX STAN 63/1981
|
Kenya standard specification for concentrated apple juice preserved exclusively by physical means.
|
KS CODEX STAN 64/1981
|
Kenya standard specification for concentrated orange juice preserved exclusively by physical means.
|
KS ISO 13542/1995
|
Kenya standard specification for paper and board for internal diameters of cores for reels.
|
KS ISO 2068/1972
|
Kenya standard specification for barium chromatic pigments for paints.
|
KS ISO 788/1974
|
Kenya standard specification for ultramarine pigments for paints.
|
KS ISO 1249/1974 Corr. 1/1992
|
Kenya standard specification for zinc chromate pigments—basic zinc tetrahydroxy-chromate pigments.
|
KS ISO 6754/1990
|
Kenya standard specification for zinc phosphate pigment for paints and methods of test.
|
KS ISO 2040/1977
|
Kenya standard specification for strontium chromate pig mates for paints.
|
KS ISO 4619/1980
|
Kenya standard specification for driers for paints and varnishes.
|
KS 1535/2000
|
Kenya standard specification for glass for use in building.Part 7: Specification for wired or unwired channel-shaped glass.
|
KS 163/2000
|
Kenya standard specification for colours for ready mixed paints (1st revision, 2000).
|
KS 998/1998
|
Kenya standard specification for chocolates.
|
KS 1095/1994
|
Kenya standard specification for food-seasoning mixtures.
|
KS 1074/1994
|
Kenya standard specification for millet flour.
|
KS 1073/1994
|
Kenya standard specification for sorghum.
|
KS ISO 8367/1993
|
Kenya standard specification for packaging—dimensional tolerances for general purpose sacks.Part 1: Paper sacks.Part 2: Sacks made from thermoplastic flexible film.
|
KS ISO 594/1986
|
Kenya standard specification for conical fitting with a 6 per cent (luer) taper for syringes, needles and certain other medical equipment.
|
KS ISO 594-1/1986
|
Part 1: General requirements.
|
KS ISO 594-2/1998
|
Part 2: Lock fittings.
|
KS ISO 3171/1988
|
Kenya standard specification for petroleum liquids—automatic pipeline sampling.
|
KS ISO 3262/1997
|
Kenya standard specification for extenders for paints—specification and methods of test.
|
KS ISO 3262-1/1997
|
Part 1: Introduction and general test methods.
|
KS ISO 3262-2/1998
|
Part 2: Barytes (natural barium sulphate).
|
KS ISO 3262-3/1998
|
Part 3: Blank fixe.
|
KS ISO 3262-5/1998
|
Part 5: Natural crystalline calcium carbonate.
|
KS ISO 3262-6/1998
|
Part 6: Precipitated calcium carbonate.
|
KS ISO 3262-7/1997
|
Part 7: Dolomite.
|
KS 42/1999
|
Kenya standard specification for dry shelled maize (1st revision, 1999).
|
KS ISO 3262-9/1998
|
Part 9: Calcined clay.
|
KS ISO 6697/1994
|
Kenya standard specification for cycles—hubs and free wheels— assembly dimensions.
|
KS ISO 6590/1983
|
Kenya standard specification for packaging-sacks—vocabulary and types.
|
KS ISO 6590-1/1983
|
Part 1: Paper sacks.
|
KS ISO 6590-2/1986
|
Part 2: Sacks made from thermoplastic flexible film.
|
KS ISO 6591-2/1984
|
Kenya standard specification for packaging—sacks—description and method of measurements.
|
KS ISO 6591-1/1984
|
Part 1: Empty paper sacks.
|
KS ISO 6591-2/1985
|
Part 2: Empty sacks made from thermoplastic flexible film.
|
KS ISO 3696/1987
|
Kenya standard water for analytical laboratory use—specifications and test methods.
|
KS ISO 211/1999
|
Kenya standard specification for essential oils—labelling and marking containers.
|
KS ISO 210/1999
|
Kenya standard specification for essential oils—packing.
|
KS ISO 4131/1979
|
Kenya standard specification for road vehicles—dimensional codes for passengers cars.
|
KS ISO 4100/1980
|
Kenya standard specification for road vehicles—world parts manufacturers identifier (WPMI) code.
|
KS ISO 10555/1995
|
Kenya standard specification for sterile, single-use intravascular catheters.
|
KS ISO 10555/1995 Amd 1/1999
|
Part 1: General requirements.
|
KS ISO 10555-2/199
|
Part 2: Angiographic catheters.
|
KS ISO 10555-3/1996
|
Part 3: Central venous catheters.
|
KS ISO 10555-4/1996
|
Part 4: Balloon dilatation catheters
|
KS ISO 10555-5/1996
|
Part 5: Over-needle peripheral catheters.
|
KS ISO 4586/1997
|
Kenya standard specification for high pressure-decorative laminates—sheets made from thermosetting resins.Part 1: Classification and specifications.
|
KS ISO 7864/1993
|
Kenya standard specification for sterile hypodermic needles for single use.
|
KS ISO 6009/1992
|
Kenya standard specification for hypodermic needles for single use—colour coding for identification.
|
KS ISO 1998/1998
|
Kenya standard specification for petroleum terminology.
|
KS ISO 1998-2/ 1998
|
Part 2: Properties and tests.
|
KS ISO 1998-3/1998
|
Part 3: Exploration and production.
|
KS ISO 1998-4/1998
|
Part 4: Refining.
|
KS ISO 1998-5/1998
|
Part 5: Transport, storage and distribution.
|
KS ISO 9884/1994
|
Kenya standard specification for tea sacks.Part 1: Reference sack for palletized and containerized transport of tea.
|
KS ISO 9413/1998
|
Kenya standard specification for tyre valves—dimensions and designation.
|
KS ISO 4997/1999
|
Kenya standard specification for cold-reduced steel sheet of structural quality.
|
KS ISO 11949/1995
|
Kenya standard specification for cold-reduced electrolytic tinplate.
|
KS ISO 3573/1999
|
Kenya standard specification for hot-rolled carbon steel of commercial and drawing qualities.
|
KS 1452/1999
|
Kenya standard code of practice for road lighting.Part 2: Code of practice for lighting of traffic routes.Part 4: Code of practice for lighting of single-level road Junctions including roundabouts.Part 5: Code of practice for lighting of grade-separated junctions.Part 6: Code of practice for lighting of bridges and elevated roads.Part 7: Code of practice for lighting of tunnels and underpasses.Part 8: Code of practice for lighting of roads near aerodromes, railways, docks and navigable waterways.Part 9: Code of practice for lighting of urban centre and public amenity areas.Part 10: Code of practice for lighting of motorways.
|
KS 1432/1999
|
Kenya standard specification for connecting devices for low voltage circuits for household and similar purposes.Part 4: particular requirements for connecting devices with insulation—piercing clamping units.
|
KS 184/1999
|
Kenya standard specification for primary batteries.Part 1: General.Part 2: Specification sheets.
|
KS 1502/1999
|
Kenya standard specification for electromechanical all-or-nothing relays.Part 1: General requirements and tests.Part 2: Section 1: Test and measurement procedures.Part 3: Insulation tests.Part 4: Application of quality assessment system for electronic components to all-or-nothing relays.
|
KS 1591/1999
|
Kenya standard specification for safety requirements for audio, video and electronic apparatus.
|
KS 1586/1999
|
Kenya standard specification for radio interference measuring apparatus and measurement methods.Part 1: Radio disturbance and immunity measuring apparatus.
|
KS 136/1999
|
Kenya standard specification for grades of wheat grain (1st revision, 1999).
|
KS 1290/1999
|
Kenya standard specification for bleaching agents.Part 1: sodium hypochlorite solutions (1st revision, 1999).
|
KS 809/1999
|
Kenya standard specification for toilet cleaners.Part 2: Acidic liquid toilet cleansers (1st revision, 1999).Part 3: Alkaline and neutral liquid toilet cleansers.
|
KS 802/1999
|
Kenya standard specification for cut size office papers.Part 2: Photocopy paper
|
KS 352/1999
|
Kenya standard specification for fluoridated toothpaste (1st revision, 1999).
|
KS 794/1999
|
Kenya standard specification for formulated powder hair dyes, aryl di-amine-based (1st revision, 1999).
|
KS 948/1999
|
Kenya standard specification for corrugated fiberboard boxes for export of horticultural produce (1st revision, 1999).
|
KS 698/1999
|
Kenya standard specification for liquid synthetic detergent.Part 2: General purpose liquid synthetic detergent.
|
KS 47/1999
|
Kenya standard specification for calcium ammonium nitrate fertilizer (1st revision, 1999).
|
KS 793/1999
|
Kenya standard specification for liquidation oxidation hair dyes, aryl di-amine-based (1st revision, 1999).
|
KS 51/1999
|
Kenya standard specification for ammonium sulphate nitrate fertilizer (1st revision, 1999).
|
KS 1455/1999
|
Kenya standard specification for glass cleanser.Part 1: Liquid glass cleanser.
|
KS 1578/1999
|
Kenya standard specification for metal polishes.Part 1: Ordinary liquid metal polishes.Part 2: Special metal polishes.
|
KS 1452/1999
|
Kenya standard code of practice for road lighting.Part 3: Code of practice for lighting subsidiary roads and associated pedestrian areas.
|
KS 1518/1999
|
Kenya standard specification for sunflower oil-based long oil alkyd resins.
|
KS 376/1999
|
Kenya standard specification for flexible polyurethane foams.Part 0: General requirements.Part 1: Mattresses.Part 2: Reconstituted flexible polyurethane foam.
|
KS 1522/1999
|
Kenya standard specification for rubber-based adhesives for tyres and tubes.Part 1: Non-curing.Part 2: Curing.
|
KS 1520/1999.
|
Kenya standard specification for safflower oil-based long oil alkyd resin.
|
KS 1519/1999.
|
Kenya standard specification for soyabean oil-based long oil alkyd resin.
|
KS 158/1999
|
Kenya standard specification for solid compound fertilizers.
|
KS 287/1999
|
Kenya standard specification for ammonium sulphate (sulphate of ammonia) fertilizer grade (1st revision, 1999).
|
KS 288/1999
|
Kenya standard specification for urea fertilizer grade.
|
KS 350/1999
|
Kenya standard specification for potassium chloride (muriate of potash) fertilizer grade.
|
KS 351/1999
|
Kenya standard specification for potassium sulphate (sulphate of potash) fertilizer grade.
|
KS 1526/1999
|
Kenya standard specification for toothbrush.
|
KS 1530/1999
|
Kenya standard specification for adhesives for use with ceramic tiles.
|
KS 1446/1999
|
Kenya standard specification for health drinks.Part 1: Vitamin C-based health drinks.
|
KS 1516/1999
|
Kenya standard code of hygienic practice for the handling, processing, storage and the placing on the market of fish and fishery products.
|
KS 169/1999
|
Kenya standard specification for wheat flour (1st revision, 1999).
|
KS 1565/1999
|
Kenya standard specification for frozen fillets of cuttle fish and fillets and tubes of squids.
|
KS 1564/1999
|
Kenya standard code of practice for the handling, processing, storage and distribution of molluscan shellfish.
|
KS 36/1999
|
Kenya standard specification for dairy ice-cream and ice milk.
|
KS 1550/1990
|
Kenya standard specification for carbon dioxide for carbonation of beverages.
|
KS 433/1999
|
Kenya standard specification for edible cassava starch.
|
KS 1485/1999
|
Kenya standard specification for fruit flavored drinks.
|
KS 55/1999
|
Kenya standard specification for canned corned beef (1st revision, 1999).
|
KS 172/1999
|
Kenya standard specification for bread (2nd revision, 1999).
|
KS 1540/1999
|
Kenya standard specification for knapsack sprayers.
|
KS ISO 10571/1995
|
Kenya standard specification for tyres for mobile cranes and similar specialized machines.
|
KS 1498/1999
|
Kenya standard specification for rollers and shafts for sugar-cane crushers.
|
KS 02/1999
|
Kenya standard specification for galvanized plain and corrugated steel sheets (2nd revision, 1999).
|
KS 1517/1999
|
Kenya standard specification for edible ices and ice mixes.
|
KS 1449/1999
|
Kenya standard code of practice for wall and floor tiling with natural stone tiles.
|
KS IEC 60282/1998
|
Kenya standard specification for high voltage fuses.Part 1: Current-limiting fuses.Part 3: Determination of short-circuit power factor for testing-current limiting fuses and expulsion and similar fuses.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.Part 1: General requirements and tests.
|
KS IEC 61558/
|
Kenya standard specification for safety of power transformers,power supply units and similar apparatus.Part 2-17: Particular requirements for transformers for switch mode power supplies.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, supply units and similar apparatus.Part 2-7 Particular requirements for transformers to toys.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.Part 2-6: Particular requirements for safety isolating transformers for general use.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.Part 2-5: Particular requirements for shaver transformers and shaver supply units.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.Part 2-4: Particular requirements for isolating transformers for general use.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers, power supply units and similar apparatus.Part 2-2 Particular requirements for control transformers.
|
KS IEC 61558/1997
|
Kenya standard specification for safety of power transformers power supply units and similar apparatus.Part 2-1: Particular requirements for separating transformers fo general use.
|
KS CODEX STAN 181/1991
|
Kenya standard specification for formular foods for use in weight control diets.
|
KS CODEX STAN 180/1991
|
Kenya standard specification for the labelling of and claims of foods for special medical purposes.
|
KS CODEX STAIN 11/1976
|
Kenya standard for code of hygienic practice for fresh meat.
|
KS CODEX STAN 129/1981
|
Kenya standard specification for canned apricots
|
KS CODEX STAN 6/1972
|
Kenya standard for code of hygienic practice for tree nuts.
|
KS CODEX STAN 165/1989
|
Kenya standard specification for quick frozen blocks of fish fillet, minced fish flesh and mixtures of fillets and minced fish flesh.
|
KS CODEX STAN 166/1989
|
Kenya standard specification for quick frozen fish sticks (fish fingers) and fish portions—breaded or in batter.
|
KS CODEX STAN 111/1981
|
Kenya standard specification for quick frozen cauliflower.
|
KS CODEX STAN 18/1981
|
Kenya standard specification for canned sweet corn.
|
KS 580
|
Kenya standard specification for cosmetic creams, lotions and gels for skin care (2nd revision, 2001).
|
KS 1474 Part 3/2001
|
Kenya standard classification of cosmetic raw materials and adjuncts.Part 3: List of substances which cosmetic products must not contain except subject to the restrictions and conditions laid down (1st revision, 2001).
|
KS 1432/1999
|
Kenya standard specification for connecting devices for low voltage circuits for household and similar purposes.Part 1: General requirements.Part 2: Particular requirements for connecting devices with screw-type clamping units.Part 3: Particular requirements for twist-on connecting devices.
|
KS 247/1981
|
Kenya standard specification for switches for domestic and similar purposes (2nd revision, 1999).
|
KS 473/1983
|
Kenya standard specification for starters for fluorescent lamps (1st revision, 1999).
|
KS 910/1990
|
Kenya standard specification for gloss solvent borne paints for interior and exterior use (1st revision, 1999).
|
KS 601/1988
|
Kenya standard specification for hair creams, lotions and gels (1srevision, 1999).
|
KS 602/1989
|
Kenya standard specification for hair oils (1st revision, 1999).
|
KS 429/1983
|
Kenya standard specification for code of marketing of breast-milk substitutes (1st revision, 1999).
|
KS 1484/1999
|
Kenya standard specification for canned asparagus.
|
KS 35/1977
|
Kenya standard specifications for dairy cream for direct consumption (1st revision, 1999).
|
KS 27/1977
|
Kenya standard specification for butter (1st revision, 1999).
|
KS 273/1990
|
Kenya standard specification for woven bags (100 per cent sisal) for clean coffee beans (2nd revision, 1999).
|
KS OIML R 111/1994
|
Kenya standard specification for weights of classes E1, E2, F1, F2, M1, M2, M3.
|
KS OMIL R 76/1992
|
Kenya standard specification for non-automatic weighing instruments.Part 1: Meteorological and technical requirements—tests.
|
KS CODEX STAN 37/1981
|
Kenya standard specification for canned shrimps or prawns.
|
KS CODEX STAN 90/1981
|
Kenya standard specification for canned crap meat.
|
KS CODEX STAN 70/1981
|
Kenya standard specification for canned tuna and bonito in water or oil.
|
KS CODEX STAN 94/1981
|
Kenya standard specification for canned sardines and sardine-type products.Part 1: Moisture meters for cereals.
|
KS ISO 7700-1/1984
|
Kenya standard specification for check of the calibration of moisture meters.Part 2: Moisture meters for oilseeds.
|
KS ISO 6789/1992
|
Kenya standard specification for assembly tools for screws and nuts—hand torque tools—requirements and tests methods.
|
KS ISO 6479/1984
|
Kenya standard specification for shelled sweet kernels of apricots.
|
KS ISO 7701/1994
|
Kenya standard specification for dried apples—specification and test methods.
|
KS ISO 7702/1995
|
Kenya standard specification for dried pears—specification and test methods.
|
KS ISO 500/1991
|
Kenya standard specification for agricultural tractors—specification for rear mounted power take-off types 1, 2 and 3.
|
KS ISO 5682/1996
|
Kenya standard specification for equipment for crop protection—spraying equipment.Part 1: Test methods for sprayer nozzles.Part 2: Test methods for hydraulic sprayers.Part 3: Test methods for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
|
KS ISO 730/1994
|
Kenya standard specification for agricultural wheeled tractors—specification for rear mounted three point linkages.
|
KS ISO 730-
|
1/1994 Part 1: Categories 1, 2, and 3.
|
KS ISO 730- 2/1979
|
Part 2: Category 1 N (Narrow hitch).
|
KS 44/1998
|
Kenya standard specification for baby soaps.
|
KS 804/1998
|
Kenya standard specification for antibacterial toilet soap.
|
KS 1290/1998
|
Kenya standard specification for bleaching agents.Part 2: Sodium hypochlorite solution for water treatment.Part 3: Chlorinated lime (bleaching powder for water treatment).Part 4: Calcium hypochlorite for water treatment.
|
KS 1407/1998
|
Kenya standard specification for chlorpyrifos.Part 1: Technical grade.Part 2: Emulsifiable concentrates
|
KS 1410/1998
|
Kenya standard specification for marathion.Part 1: Technical grade.Part 2: Emulsifiable concentratesPart 3: Dusting powders.
|
KS 1411/1998
|
Kenya standard specification for diazinon.Part 1: Technical grade.Part 2: Emulsifiable concentrates.
|
KS 186/1998
|
Kenya standard specification for automatic fire alarm systems in buildings.Part 5: Self-contained smoke detectors.
|
KS 279/1998
|
Kenya standard specification for electric irons for household use (1st revision, 1998).
|
KS 340/1998
|
Kenya standard specification for edible maize starch.
|
KS 1470/1998
|
Kenya standard specification for fresh dried rastrineobola argentea (omena/dagaa).
|
KS 1399/1998
|
Kenya standard specification for fresh fin fish.Part 1: Fresh whole fish.Part 2: Fresh fish fillet
|
KS 1339/1998
|
Kenya standard specification for hand hammers.
|
KS 1439/1998
|
Kenya standard specification for general requirements for domestic and commercial equipment for use with L. P.G.
|
KS 1456/1998
|
Kenya standard specification for non-destructive testing of welded joints minimum requirement for non-destructive testing methods.
|
KS CODEX STAN 23/1981
|
Kenya standard specification for edible sunflowers seed oil.
|
KS CODEX STAN 25/1981
|
Kenya standard specification for edible maize oil.
|
KS CODEX STAN
|
Kenya standard specification for edible sesame seed oil.
|
KS CODEX STAN 124/1981
|
Kenya standard specification for edible coconut oil.
|
KS CODEX STAN 126/1981
|
Kenya standard specification for edible palm kernel oil.
|
KS CODEX STAN 147/1981
|
Kenya standard specification for cocoa butter confectionery.
|
KS ISO 2726/1995
|
Kenya standard specification for woodworking tools—metal bodied bench planes, plane cutters and cap irons.
|
KS ISO 10103/1990
|
Kenya standard specification for assembly tools for screws and nuts—double headed, deep offset and modified offset, box wrenches.
|
KS ISO 10104/1990
|
Kenya standard specification for assembly tools for screws and nuts—double headed, deep offset and modified offset, box wrenches.
|
KS ISO 2344/1992
|
Kenya specification for road vehicles—specification for M 14 X 1, 25 spark-plugs with conical seating and their cylinder head housings.
|
KS ISO 1919/1998
|
Kenya standard specification for road vehicles—specification for M 14 X 1, 25 spark-plugs with flat seating and their cylinder head housing.
|
KS ISO 2704/1998
|
Kenya standard specification for road vehicles—specification for M 10 X 1 spark-plugs with fat seating and their cylinder head housing.
|
KS ISO 2705/1999
|
Kenya standard specification for road vehicles—specification for M 12 X 1, 25 spark plugs with flat seating and their cylinder head housings.
|
KS ISO 1126/1970
|
Kenya standard specification for recommended symbolic designation of direction of closing and faces of doors, windows and shutters.
|
KS ISO 9051/1990
|
Kenya standard specification for glass in building—glazed assemblies containing fire-resistant transparent or translucent glass, for use in building.
|
KS 983/1999
|
Kenya standard specification for performance requirements for incineration plant for the destruction of hospital waste.
|
KS 154/1997
|
Kenya standard specification for both plain and fork hoes (2nd revision, 1999).
|
KS 151/1999
|
Kenya standard specification for machetes (2nd revision, 1999).
|
KS 986/1999
|
Kenya standard for code of practice for the design, specification, and installation and commissioning of incineration plant for the destruction of hospital waste.
|
KS IEC/CISPR 22/1997
|
Kenya standard specification for radio information technology equipment disturbance characteristics—limits ad methods of measurement.
|
KS IEC/CISPR 23/1987
|
Kenya standard specification for determination of limits for industrial, scientific and medical information technology equipment—immunity characteristics—limits and methods for measurement.
|
KS IEC/CISPR 24/1987
|
Kenya standard specification for characteristics of information technology equipment—limits and methods.
|
KS IEC/CISPR 20/1988
|
Kenya standard specification for electro-magnetic immunity requirements of sound and television broadcast receivers and associated equipment.
|
KS IEC/CISPR11/1997
|
Kenya standard for industrial, scientific and medical (ISM) radi frequency equipment—electromagnetic disturbance characteristics—limits and methods of measurement.
|
KS IEC/CISPR14-2/1997
|
Kenya standard specification for electromagnetic compatibility—requirements for household appliances, electric tools and similar apparatus.
|
KS IEC/CISPR14-1 amd1/1996: amd 2/1998
|
Kenya standard specification for limits and methods of measurement of radio disturbance characteristics of electric motor-operated and thermal appliances for household and similar purposes, electric tools and similar electric apparatus.
|
KS 827/1994
|
Kenya standard specification for concrete paving blocks.
|
KS 1642/2000
|
Kenya standard specification for frozen tuna loin.
|
1. |
This Order may be cited as the Standards Order.
|
2. |
Kenya standards having been declared for the several commodities and methods and procedures set out in the first and second columns of the Schedule, no person shall manufacture or sell those commodities or use those methods or procedures on or after forty-two (42) days of the date of publication of this Order unless the commodities and methods or procedures comply with the requirements of the relevant Kenya Standards.
|
Schedule
Number
|
Title of Specification or Code of Practice
|
KS 05–1499/1998
|
Kenya standard code of practice for processing, handling and distribution of alcoholic beverages.
|
KS 01–458/1987
|
supplements for ruminant livestock (1st revision, 1998).
|
KS 05–1398/1998
|
Kenya standard specification for dressed poultry.
|
KS 05–1313/1998
|
Kenya standard specification for dessicated coconut.
|
KS 05–436 Part 2/1998
|
Kenya standard specification for cocoa-sugar mixtures.
|
KS 05–1094 Part 2/1998
|
Kenya standard specification for banana crisps.
|
KS 05–1094 Part 3/1998
|
Kenya standard specification for cassava crisps.
|
KS 03–162/1982
|
Kenya standard specification for road marking paints (1st revision, 1998).
|
KS 03–927/1998
|
Kenya standard specification for disinfecting general-purpose detergents.
|
KS 03–929/1998
|
Kenya standard specification for QAC-based aromatic disinfectant liquid.
|
KS 03–426/1998
|
Kenya standard specification for paraffin wax.
|
KS 03–1427/1998
|
Kenya standard specification for microcrystalline of wax petroleum origin.
|
KS 03–1454/1998
|
Kenya standard specification for shoe cream.
|
KS 03–1443/1998
|
Kenya standard specification for washing bars.
|
KS 03–240/1979
|
Kenya standard specification for glazed dust-pressed wall tiles (1st revision, 1998).
|
KS 06–452/1992
|
Kenya standard specification for stainless steel sinks for domestic purposes (2nd revision, 1998).
|
KS 06–1322/1998
|
Kenya standard specification for charcoal burning ironing presses.
|
KS 06–1348/1998
|
Kenya standard specification for parallel action flat nose pliers.
|
KS 06–1349/1998
|
Kenya standard specification for scissors for general purposes.
|
KS 06–205/1979
|
Kenya standard specification for retread car and commercial vehicle tyres (2nd revision, 1998).
|
KS 06–1350/1998
|
Kenya standard specification for tow-rope assemblies for towing passenger cars and light vans.
|
KS 06–1347/1998
|
Kenya standard specification for metric steel tape measures (winding type).
|
KS ISO 8442/1997
|
Kenya standard specification for materials and articles in contact with foodstuffs—cutlery and table hollowware.Part 1: Requirements for cutlery for the preparation of food.Part 2: Requirements for stainless steel and silver-plated cutlery.Part 3: Requirements for silver-plated table and decorative hollowware.Part 4: Requirements for gold-plated cutlery.
|
KS ISO 9994/1995
|
Kenya standard lighters—safety specification.
|
KS 02–979/1998
|
Kenya standard specification for gypsum plaster board for direct surface decoration or gypsum finishes.
|
KS 02–980/1998
|
Kenya standard specification for gypsum plasters.
|
KS 02–931/1998
|
Kenya standard specification for determination of mechanical properties of gypsum plasters.
|
KS 04–468/1998
|
Kenya standard specification for flexible non-metallic conduits for electrical wiring.Part 1: Plain conduits.
|
KS 04–1329/1998
|
Kenya standard specification for stationary thermal storage electric water heaters.
|
KS 04–1384/1998
|
Kenya standard specification for hand tools for live working up to 1000 V a.c. and 1500 V d.c.
|
KS 04–1383/1998
|
Kenya standard specification for safety hand-held motor operated electric tools.Part 1: General requirements.Part 2: Particular requirements for drills.Part 3: Particular requirements for grinders and disk-type senders.Part 4: Particular requirements for circular saws and circular knives.Part 5: Particular required for screw drivers and impact wrenches.
|
KS 04–280/1982
|
Kenya standard specification for controls for heating units in household electric ranges (1st revision, 1998).
|
KS 04–1431/1998
|
Kenya standard specification for junction boxes for use in electrical installations.
|
KS 08–1113/1998
|
Kenya standard specification for staple spun yarns.Part 2: 100% wool (worsted) yarns.
|
KS 08–607/1998
|
Kenya standard specification for adjacent fabric.Part 9: Multifibre fabric.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 1: Definitions, classification, characteristics and marking.
|
KS 104/2001
|
Kenya standard specification for cold rolled steel sections.
|
KS ISO IEC 14598–5/1998
|
Kenya standard information technology software product evaluation.Part 5: Process for evaluators.
|
KS 1724/2001
|
Kenya standard specification for multi-frequency tone signalling protocol for social alarm systems.
|
KS 1722/2001
|
Kenya standard alarm systems—social alarm systems.Part 2: Trigger devices.
|
KS 184/2001
|
Kenya standard specification for primary batteries.Part 4: Safety of lithium batteries.
|
KS 1709/2001
|
Kenya standard specification for batteries for use in photovoltaic systems.
|
KS 1637/2001
|
Kenya standard specification for welding cables.
|
KS ISO 8536–3/1999
|
Kenya standard specification for infusion equipment for medical use.Part 3: Aluminium caps for infusion bottles.
|
KS ISO 8536–2/2001
|
Kenya standard specification for infusion equipment for medical use.Part 2: Closures for infusion bottles.
|
KS ISO 8536–1/2000
|
Kenya standard specification for infusion equipment for medical use.Part 1: Infusion glass bottles.
|
KS ISO 10990–4/1999
|
Kenya standard specification for animal (mammal) traps.Part 4: Methods for testing killing-trap systems used on land or underwater.
|
KS ISO 8322–6/1991
|
Kenya standard building construction—measuring instruments—procedures for determining accuracy in use.Part 6: Laser instruments.
|
KS ISO 8322–10/1995
|
Kenya standard building construction—measuring instruments—procedures for determining accuracy in use.Part 10: Difference between non-glass reflectors and electronic distance-measuring prisms (traditional glass prisms) to distance up to 150 m.
|
KS ISO 8322–4/1991
|
Kenya standard building construction-measuring instruments—procedures for determining accuracy in use.Part 4: Theodolites.
|
KS ISO 8322–3/1989
|
Kenya standard building construction measuring instruments—procedures for determining accuracy in use.Part 3: Optical levelling instruments.
|
KS ISO 8322–2/1989
|
Kenya standard building construction measuring instruments—procedures for determining accuracy in use.Part 2: Measuring tapes.
|
KS ISO 4706/1989
|
Kenya standard refillable welded steel gas cylinders.
|
KS ISO 15513/2000
|
Kenya standard cranes—competency requirements for crane drivers (operators), slingers, signallers and assessors.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 9: Dust-pressed tiles with water absorption of E > 10%.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 8: Dust-pressed tiles with water absorption of 6 < E ≤ 10%.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 7: Dust-pressed tiles with water absorption 3% ≤ E ≤ 6%.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 6: Dust-pressed tiles with low water absorption (E ≤ 3%).
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 5: Extruded ceramic tiles with water absorption of E > 10%.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 4: Extruded ceramic tiles with water absorption of 6 < E ≤10%.
|
KS ISO 140–2/1991
|
Kenya standard acoustics—measurements of sound insulation in buildings and of building elements.Part 2: Determination, verification and application of precision data.
|
KS ISO 2776/1974
|
Kenya standard modular co-ordination—co-ordinating sizes for door-sets—external and internal.
|
KS ISO 140-1/1997
|
Kenya standard acoustics—measurement of sound insulation in buildings and of building elements.Part 1: Requirements for laboratory test facilities with suppressed flanking transmission.
|
KS 1725/2001
|
Kenya standard cement.Part 1: Composition, specifications and conformity criteria for common cements.
|
KS 1725/2001
|
Kenya standard cement.Part 2: Conformity evaluation.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 3: Extruded ceramic tiles with a water absorption of 3% ≤ E ≤6%.
|
KS 1738/2001
|
Kenya standard specification for ceramic floor and wall tiles.Part 2: Extruded ceramic tiles with low water absorption (E ≤ 3%).
|
KS 34/2001
|
Kenya standard specification for yoghurt (2nd revision, 2001).
|
KS 551/2001
|
Kenya standard specification for mayonnaise and mayonnaise-like products (1st revision, 2001).
|
KS ISO 11165/1995
|
Kenya standard dried sage (salvia officinalis L.)—specification.
|
KS ISO 11416/1995
|
Kenya standard tennis rackets—racket components and physical parameters.
|
KS ISO 5970/1979
|
Kenya standard furniture—chairs and tables for educational institutions—functional sizes.
|
KS ISO 9202/1991
|
Kenya standard jewellery—fineness of precious metal alloys.
|
KS ISO 8653/1986
|
Kenya standard jewellery-ring-sizes—definition, measurement and designation.
|
KS 1656/2001
|
Kenya standard specification for general and industrial lined and unlined PVC boots.
|
KS 1635/2001
|
Kenya standard specification for moulded rubber heels and soles.
|
KS ISO 6530/1990
|
Kenya standard protective clothing—protection against liquid chemicals—determination of resistance of materials to penetration by liquids.
|
KS 1088/2001
|
Kenya standard specification for soups and broths.Part 1: Dehydrated soups and broths (1st revision, 2001).
|
KS 29/2001
|
Kenya standard specification for milk powders and cream powders (2nd revision, 2001).
|
KS 1715/2001
|
Kenya standard code of practice for the sensory evaluation of fish and shellfish in laboratories.
|
KS CODEX STAN 189/1993
|
Kenya standard for dried shark fins.
|
KS CODEX STAN 202/1995
|
Kenya standard for couscous.
|
KS CODEX STAN 114/1981
|
Kenya standard specification for quick-frozen French fried potatoes.
|
KS 1740/2001
|
Kenya standard specification for dried mangoes.
|
KS 1088/2001
|
Kenya standard specification for soups and broths.Part 2: Canned soups and broths.
|
KS 650/2001
|
Kenya standard specification for glass globes for paraffin lighting appliances for domestic use (1st revision, 2001).
|
KS 802/2001
|
Kenya standard specification for cut-size papers.Part 2: Photocopy paper (1st revision, 2001).
|
KS 802/2001
|
Kenya standard specification for cut-size papers.Part 1: General purpose paper (1st revision, 2001).
|
KS 945/2001
|
Kenya standard specification for sack kraft paper.Part 1: Natural and extensible sack kraft paper.
|
KS ISO 3143/1997
|
Kenya standard oil of clove stems [Syzygium aromaticum (L.) Merret Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison].
|
KS ISO 3142/1997
|
Kenya standard oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison].
|
KS IEC 60947–5–3/1996
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 3. Requirements for proximity devices with defined behaviour under fault conditions (PDF).
|
KS IEC 60947–5–4/1996
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 4: Methods of assessing the performance of low-energy contacts—special tests.
|
KS IEC 60947–5–5/1997
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 5: Electrical emergency stop device with mechanical latching function.
|
KS IEC 60947–5–6/1999
|
Kenya standard specification for low voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 6: DC interface for proximity sensors and switching amplifiers (namur).
|
KS IEC 60947–6–2/1992
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 6: Multiple function equipment.Section 2: Control and protective switching devices (or equipment) (CPS).
|
KS IEC 60947–6–1/1998
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 6: Multiple function equipment.Section 1: Automatic transfer switching equipment.
|
KS IEC 60947–7–1/1989
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 7: Ancillary equipment.Section 1: Terminal blocks for copper conductors.
|
KS IEC 60947–5–1/1999
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 1: Electromechanical control circuit devices.
|
KS IEC 60947–5–2/1997
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 5: Control circuit devices and switching elements.Section 2: Proximity switches.
|
KS ISO 6867/2000
|
Kenya standard animal—animal feeding stuffs—determination of Vitamin E content—method using high-performance liquid chromatography.
|
KS IEC 60439–5/1996
|
Kenya standard low-voltage switchgear and controlgear assemblies.Part 5: Particular requirements for assemblies intended to be installed outdoors in public places—cable distribution cabinets (CDCs) for power distribution in networks.
|
KS IEC 60439–4/1999
|
Kenya standard low-voltage switchgear and controlgear assemblies.Part 4: Particular requirements for assemblies for construction sites (ACS).
|
KS IEC 60439–3/1990
|
Kenya standard specification for low-voltage switchgear and controlgear assemblies.Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use—distribution boards.
|
KS IEC 60439–2/1987
|
Kenya standard low voltage switchgear and controlgear assemblies.Part 2: Particular requirements busbar trunking systems (busways).
|
KS IEC 60439–1/1999
|
Kenya standard low-voltage switchgear and controlgear assemblies.Part 1: Type-tested and partially type-tested assemblies.
|
KS IEC 62151/2000
|
Kenya standard safety of equipment electrically connected to a telecommunication network.
|
KS IEC 60244–1/1968
|
Kenya standard methods of measurement for radio transmitters.Part 1: General characteristics for broadcast transmitters.
|
KS IEC 60947–7–2/1995
|
Kenya standard specification for low-voltage switchgear and controlgear.Part 7: Ancillary equipment.Section 2: Protective conductor terminal blocks for copper conductors.
|
KS ISO 11163/1995
|
Kenya standard dried sweet basil (Ocimum basilicum L.)— specification.
|
KS CODEX STAN 143/1985
|
Kenya standard for dates.
|
KS ISO 7713/1985
|
Kenya standard laboratory glassware-disposal serological pipettes.
|
KS 1723/2001
|
Kenya standard code of practice for documentation for social alarm systems.
|
THE STANDARDS (KENYA ACCREDITATION SERVICE) REGULATIONS
ARRANGEMENT OF REGULATIONS
3. |
Establishment of KENAS
|
4. |
Appointment of a Chief Executive Officer and staff
|
5. |
Functions of the KENAS
|
8. |
Powers and functions of the Board
|
9. |
The Board to establish committees
|
11. |
Immunity from actions done in good faith
|
THE STANDARDS (KENYA ACCREDITATION SERVICE) REGULATIONS
1. |
Citation
These Regulations may be cited as the Standards (Kenya Accreditation Service) Regulations.
|
2. |
Interpretation
In these Regulations, unless the context otherwise require—
“accreditation” means the procedure by which KENAS gives formal recognition that a conformity assessment body or person is competent to carry out specific tasks;
“assessment” means a process undertaken by KENAS to assess the competence of a conformity assessment body or persons based on particular standard(s) and or other normative documents and for a defined scope of accreditation;
“assessor” means any person qualified and authorized to perform all or any part of assessment;
“certification body” means a body corporate accredited by KENAS to certify management systems processes and products;
“conformity assessment” means demonstration that specified requirements relating to a product, process, system, person or body are fulfilled;
“conformity assessment body” means a body that performs conformity assessment activities such a laboratory, certification or inspection body;
“fees” includes royalties, subscription, application and any other fee prescribed by the Board;
“inspection body” means a body corporate accredited by KENAS to inspect products, items or structures against specifications or requirements;
“KENAS” means Kenya Accreditation Service established under Regulation(3);
“laboratory” means an establishment, which does one, a combination or all of the following; measures, examines, tests, calibrates or otherwise determines the characteristics or performance of materials or products;
“lead assessor” means an assessor who is qualified and authorized to manage quality systems management;
“person” means an individual, firm or organization;
|
3. |
Establishment of KENAS
(1) |
There is established a body to be known as the Kenya Accreditation Service.
|
(2) |
The Board of KENAS shall consist of the following members—
(a) |
a Chairperson who shall be appointed by the Cabinet Secretary;
|
(b) |
the Chief Executive Office of the Kenya Bureau of Standards;
|
(c) |
not more than three people, appointed by the Cabinet Secretary on the advice of the Council, who possess knowledge and competence in conformity assessment systems and competence in conformity assessment systems and who shall not be members of the Council nor officers employed by the Kenya Bureau of Standards;
|
(d) |
not more than four people, appointed by the Cabinet Secretary, representing conformity assessment bodies;
|
(e) |
the Chief Executive Officer of KENAS who shall be the secretary.
|
|
|
4. |
Appointment of a Chief Executive Officer and staff
The Board shall appoint a Chief Executive Officer and such members of staff as the Board may deem necessary for the proper performance of the function of KENAS
|
5. |
Functions of the KENAS
(a) |
develop and regulate the criteria or requirement for the registration of assessors, conformity assessment inspectors, auditors and training providers and review such criteria or requirements from time to time;
|
(b) |
develop and regulate criteria or requirements for accrediting conformity assessment bodies;
|
(c) |
register all assessors, conformity assessment inspectors, auditors and training providers;
|
(d) |
design and issue identification numbers and certificates to all registered assessors, conformity assessment inspectors, auditors and training providers and conformity assessment bodies;
|
(e) |
accredit conformity assessment bodies;
|
(f) |
open, maintain and update a register of all registered assessors, conformity assessment inspectors, auditors and training providers and accredited conformity assessment bodies;
|
(g) |
publish annually in the Gazette all the assessors, conformity assessment inspectors, auditors, training providers and conformity assessment bodies who have been registered or accredited in that particular year;
|
(h) |
establish arrangements promoting the use of the marks and certificates issued by registered persons and accredited conformity assessment bodies;
|
(i) |
establish and nurture relations and cooperation with regional and international accreditation bodies, persons, associations and organizations that the Board may consider desirable or appropriate and in furtherance of the objectives and purposes for which KENAS is established;
|
(j) |
organize activities aimed at raising awareness on the importance and purpose of registration and accreditation;
|
(k) |
establish a Secretariat to administer these Regulations.
|
|
6. |
Registration
(1) |
Every person or firm wishing to be registered or accredited shall make an application to the Board in the prescribed forms.
|
(2) |
An application for registration or accreditation shall be accompanied by such fees as the Board may, from time to time, prescribe.
|
(3) |
All registered persons or every accredited conformity assessment body shall pay such type and amount of fees and subscription as shall be determined, from time to time, by the Board.
|
(4) |
No person or conformity assessment body shall undertake any certification or conformity assessment activity unless authorised and duly registered or accredited by the Board.
|
(5) |
Any person or conformity assessment body who undertakes certification or conformity assessment activity without first being registered or accredited shall commit an offence and shall, on conviction, be liable to punishment as provided for under the Act.
|
|
7. |
Certificates
(1) |
All registered persons and every accredited conformity assessment body under these Regulations shall be issued with—
(a) |
a certificate of accreditation in the prescribed form; and
|
(b) |
an identification number specified by the Board.
|
|
(2) |
A certificate issued under these Regulations shall contain such terms and conditions as the Board may prescribe and shall be conclusive evidence of authority to operate as a duly registered person or accredited body.
|
|
8. |
Powers and functions of the Board
(1) |
The Board shall have powers to cancel the registration or accreditation where—
(a) |
registration or accreditation has been obtained by fraud;
|
(b) |
the registered person or accredited conformity assessment body does not comply with specified criteria, requirement or condition for registration or accreditation as the Board may prescribe or having complied with the criteria, requirement or condition at the time of registration or accreditation ceases to comply by any other reason;
|
(c) |
the registered person has been adjudged bankrupt;
|
(d) |
the accredited conformity assessment body is declared insolvent or has had a receiving order issued against it;
|
(e) |
the registered person or accredited conformity assessment body has refused or neglected to pay specified fees as the Board may, from time to time, prescribe.
|
|
(2) |
The Board shall have power to supervise and control the administration and financial management of KENAS.
|
(3) |
The Board may advice and obtain advice from the Cabinet Secretary in regard to any matter in his purview under these Regulations.
|
(4) |
The Board shall formulate matters of policy for the purpose of providing general or specific guidance to KENAS for the better performance of its functions under these Regulations.
|
(5) |
(a) |
shall administer the assets and funds of KENAS in such a manner and for such purposes as will promote the objectives and interests of KENAS in accordance with these Regulations;
|
(b) |
may receive donations and other monies, property and equipment on behalf of KENAS and shall have power to make legitimate disbursements thereform.
|
|
(6) |
The Board shall have powers to establish committees to which it may delegate specific tasks.
|
(7) |
The Board shall have powers to grant, renew, extend, withdraw or cancel an registration or accreditation.
|
|
9. |
The Board to establish committees
The Board shall establish-
(a) |
a committee to be known as the registration and accreditation committee which shall comprise of not less than four but not more than six members who shall be persons knowledgeable in conformity assessment actives and which shall have powers to—
(i) |
make rules to regulate its own procedure and affairs to ensure independence and impartiality; |
(ii) |
review applications for registration and accreditation; and |
(iii) |
recommend to the Board whether or not to grant, renew, extend, withdraw or cancel registration or accreditation and the manner with which to deal with the certificate issued thereto; |
|
(b) |
an advisory committee of such members not being members of the Board and not being more than five to—
(i) |
hear all disputes regarding any person or body seeking registration or accreditation or any person or body registered or accredited by the Board; and |
(ii) |
make recommendations to the Board and the Board shall consider such recommendations and make a decision. |
|
|
10. |
Financial provisions
(1) |
The funds of KENAS shall consist of all monies received or recovered under these Regulations by or on behalf of KENAS or any other monies that may be made available to KENAS.
|
(2) |
The Board shall cause to be kept all proper books of accounts and other books and records in relation to the funds and all the undertakings, activities and property of KENAS and shall, within such period after the end of each financial year, as the Cabinet Secretary shall specify, cause to be prepared—
(a) |
a balance sheet showing in detail the assets and liabilities of KENAS as at the end of that year;
|
(b) |
such other statements of accounts as may be necessary to indicate the financial status of KENAS as at the end of that year.
|
|
(3) |
The accounts of KENAS shall be examined audited and reported upon annually by the Controller and Auditor-General.
|
|
11. |
Immunity from actions done in good faith
(1) |
No matter or thing done by the Board or any officer or employee or agent of KENAS shall, if the matter or thing is done bonafide for executing the functions, powers and duties of KENAS render the member, officer, employee or agent or any person acting by his directions personally liable to any action, claim or demand.
|
(2) |
The provisions of these Regulations shall not relieve KENAS of the liability to pay compensation or damages to any person for injury or loss caused to him, his property, or any of his interest by the exercise of powers conferred by these Regulations by reason of negligence whether wholly or partially of its officers or employees.
|
|
12. |
Delegation
The Board may by resolution either generally or in any specific case delegate to a Committee of KENAS or to any member, officer employee or agent the exercise of any of the powers or the performance of any of the functions or duties for which it is authorised by these Regulations to exercise or perform.
|
13. |
Appeals
Any registered person or accredited conformity assessment body aggrieved by any decision made by the Board and wishes to challenge the same shall within twenty one days from the date of the decision of the Board, appeal to the Standards Tribunal.
|
14. |
Revocation
The following are revoked—
(a) |
the Standards (National Calibration Service) Regulations (L.N. No. 8/1984); and
|
(b) |
the Standards (National Scheme for the Registration of Assessors) Regulations (L.N. No. 90/1995).
|
|
THE VERIFICATION OF CONFORMITY TO KENYA STANDARDS OF IMPORTS ORDER, 2005
ARRANGEMENT OF SECTIONS
3. |
Compliance with standards
|
4. |
Appointment of an inspection body
|
5. |
Verification of conformity
|
6. |
Certificate of conformity and non-conformity report
|
7. |
Destination inspection
|
9. |
Revocation. L.N. 155/1998
|
THE VERIFICATION OF CONFORMITY TO KENYA STANDARDS OF IMPORTS ORDER, 2005
1. |
Citation
This Order may be cited as the Verification of Conformity to Kenya Standards of Imports Order.
|
2. |
Publication of a list
The Kenya Bureau of Standards shall publish a list of goods which shall be subjected to verification of conformity to Kenya Standards or approved specifications.
|
3. |
Compliance with standards
A person who imports goods must ensure that the goods meet Kenya Standards or approved specifications.
|
4. |
Appointment of an inspection body
The Kenya Bureau of Standards shall appoint an inspection body or bodies in the country of origin of goods to undertake verification of conformity to Kenya Standards or approved specifications.
|
5. |
Verification of conformity
All goods which are specified by the Kenya Bureau of Standards in accordance with paragraph 2 shall be subjected to verification of conformity to Kenya Standards or approved specifications in the country of origin by an inspection body authorized by the Bureau, and may be re-inspected at the port of entry by the Bureau if it is deemed necessary.
|
6. |
Certificate of conformity and non-conformity report
(1) |
The Kenya Bureau of Standards shall issue a certificate of conformity in respect of goods that conform with Kenya Standards or approved specifications and a non conformity report in respect of goods which do not.
|
(2) |
No Goods that do not conform to the Kenya Standards or approved specifications shall be permitted into Kenya, and shall be re-shipped, returned or destroyed at the expense of the importer.
|
|
7. |
Destination inspection
(1) |
Goods specified in accordance with paragraph 2 arriving at the port of entry without a certificate of conformity shall be subjected to destination inspection at a fee of 15% of the Cost, Insurance and Freight value of the goods.
|
(2) |
The importer of such goods shall, in addition to the fee imposed in paragraph (1), execute a security bond equivalent to the said fee.
|
(3) |
Where goods subjected to destination inspection under subparagraph (1) fail to conform to Kenya Standards or approved specifications, they shall be re-shipped, returned or destroyed at the expense of the importer.
|
|
8. |
Exemption
The Cabinet Secretary may, on the advice of the National Standards Council, exempt any imports from the provisions of this Order where the Cabinet Secretary is satisfied that it is in the national interest to do so.
|
9. |
Revocation. L.N. 155/1998
The Quality Inspection of Imports Order, 1998, is revoked.
|
THE STANDARDS (QUALITY INSPECTION OF IMPORTS) REGULATIONS
1. |
These Regulations may be cited as the Standards (Quality Inspection of Imports) Regulations.
|
2. |
The goods set out in the Schedule shall, when imported into Kenya, be subjected to quality inspection by the Kenya Bureau of Standards at the port of entry.
|
3. |
The Bureau shall ensure that all products inspected under these Regulations meet the requirements of Kenya Standards or standards approved by the Bureau.
|
4. |
The quality inspection fees for the imported commodities shall be as set out in the second column of the Schedule.
|
5. |
The Bureau shall issue a Certificate of Release in respect of all goods inspected and approved by it for entry into Kenya.
|
6. |
The Bureau shall develop appropriate forms for use under these Regulations, and may develop different forms for different kinds of goods.
|
SCHEDULE [rr. 2, 5.]
Goods
|
Fees payable
|
Petroleum and petroleum prices
|
0.675% of cost, insurance and freight (cif)
|
THE STANDARDS TRIBUNAL (PRACTICE AND PROCEDURE) RULES
ARRANGEMENT OF RULES
PART I – PRELIMINARY
PART II – APPEALS AND REFERENCES TO THE TRIBUNAL
10. |
Recognized Representatives
|
13. |
Reference of a matter by the Director
|
16. |
Statement of response
|
PART III – DIRECTIONS AND PRELIMINARY OBJECTIONS
19. |
Failure to comply with directions
|
20. |
Varying or setting aside of orders
|
PART IV – JOINDER AND CONSOLIDATION
PART V – HEARING PROCEDURE
24. |
Hearing to be in public
|
PART V – DECISIONS
29. |
Application for Review
|
35. |
Interlocutory Applications
|
PART VI – MISCELLANEOUS
39. |
Recording of proceedings
|
40. |
Protection from personal liability
|
44. |
Disclosure of interest
|
45. |
Quorum of the Tribunal
|
SCHEDULES
SECOND SCHEDULE [r. 47] — |
FEES
|
THE STANDARDS TRIBUNAL (PRACTICE AND PROCEDURE) RULES
PART I – PRELIMINARY
1. |
Citation
These Rules may be cited as the Standards Tribunal (Practice and Procedure) Rules.
|
2. |
Interpretation
In these Rules, unless the context otherwise requires—
“Act” means the Standards Act (Cap. 496);
“appellant” means any person who has filed an appeal to the Tribunal;
“business day” means any day except Saturday, Sunday or a public holiday between 8 a.m. and 5 p.m.;
“Bureau” means the Kenya Bureau of Standards as established under section 3 of the Act;
“chairperson” means the person appointed as the chairperson of the Tribunal in accordance with section 16A of the Act;
“Council” means the National Standards Council as established under section 6 of the Act;
“Director” means the Director of the Kenya Bureau of Standards appointed under section 5 of the Act;
“expert” means a person who has comprehensive knowledge of or skills in matters relating to a specific field of standardization;
“hearing” means a sitting of the Tribunal constituted to—
(b) |
hear submissions from a party;
|
(d) |
do anything lawfully required to enable the Tribunal to reach a decision;
|
“KENAS” means Kenya Accreditation Service as established under the Kenya Accreditation Service Order, 2009 (L.N. 55/2009);
“KENAS Order” means the Kenya Accreditation Service Order 2009 (L.N. 55/2009);
“party” in relation to an appeal, includes the appellant, the respondent and any person joined to the proceedings as an appellant respondent or joinder;
“pleading” includes the statement of appeal of the appellant, the statement of response by the respondent, application to join and any other motion or reply thereto;
“recognized representative” means a person authorized to represent a party in accordance with Rule 10;
“reference” means a reference by the Director to the Tribunal where a matter appears to involve a point of law or to be of unusual importance or complexity;
“registry” means the place where all pleadings and supporting documents and all orders and decisions of the Tribunal are kept in accordance with these Rules;
“respondent” refers to the Director, Council, Bureau, KENAS and any party to the proceedings other than the appellant;
“Secretary” means the secretary to the Tribunal;
“Standards” means the standards declared under section 9(1) of the Act;
“Standards Levy Order” means an order made by the Cabinet Secretary under the Act; and
“Tribunal” means the Standards Tribunal as established by section 16A of the Act.
|
3. |
Application
(1) |
These Rules shall apply to all proceedings brought before the Tribunal under the Act or KENAS Order.
|
(2) |
Nothing contained in these Rules shall limit or otherwise affect the inherent power of the Tribunal to make such orders as may be necessary for the ends of justice or to prevent abuse of the process of the Tribunal.
|
|
4. |
Objective
(1) |
The overriding objective of these Rules is to facilitate the just, expeditious, proportionate and affordable resolution of disputes.
|
(2) |
The Tribunal shall, in the exercise of its powers under the Act and these Rules or in the interpretation of any of the provisions, seek to give effect to the overriding objective in paragraph (1).
|
(3) |
A party to proceedings under these Rules or an advocate for such a party is under a duty to assist the Tribunal to further the overriding objective and to that effect, to participate in the processes of the Tribunal and to comply with the directions and orders of the Tribunal.
|
|
5. |
Duty of the Tribunal
For the purpose of furthering the overriding objective specified in Rule 4, the Tribunal shall handle all matters presented before it for the purpose of attaining the following aims—
(a) |
the just determination of the proceedings;
|
(b) |
the efficient disposal of the business of the Tribunal;
|
(c) |
the efficient use of the available judicial and administrative resources;
|
(d) |
the timely disposal of the proceedings, and all other proceedings in the Tribunal, at a cost affordable by the respective parties; and
|
(e) |
the use of suitable technology.
|
|
6. |
Role of Chairperson
(1) |
The Chairperson shall coordinate the work of the Tribunal and shall—
(a) |
assign the business of the Tribunal to the members;
|
(b) |
preside over the sittings of the Tribunal:
|
(c) |
exercise all functions given under the Act and these Rules.
|
|
(2) |
The Tribunal may authorize the Chairperson to do any act required or authorized by these Rules to be done by the Tribunal, not being an act which is required to be done by the Tribunal itself.
|
(3) |
The Chairperson may assign any roles or duties not required by the Act to be personally performed by the Chairperson to any member or officer of the Tribunal.
|
|
7. |
Role of Secretary
(1) |
The Secretary shall be the registrar of the Tribunal.
|
(2) |
In relation to the proceedings before the Tribunal, the Secretary shall in particular be responsible to the Tribunal for—
(a) |
establishment and maintenance of the registry;
|
(b) |
acceptance, transmission, service and custody of documents in accordance with these Rules;
|
(c) |
certifying that any order, direction or decision is an order, direction or decision of the Tribunal, the Chairperson or a member of the Tribunal, as the case may be;
|
(d) |
causing to be kept records of the proceedings and minutes of the meetings of the Tribunal and such other records as the Tribunal may direct;
|
(e) |
assessment of the costs awarded by the Tribunal; and
|
(f) |
undertaking any other duties as may be assigned by the Tribunal.
|
|
(3) |
The Secretary may with the authorization of the Tribunal consider and dispose of procedural or administrative matters in accordance with these Rules.
|
|
8. |
Register
(1) |
The Tribunal shall cause to be prepared a register with regard to any disputes or appeals before the Tribunal which shall contain—
(a) |
the names of the parties;
|
(e) |
the final determination and the date thereon.
|
|
(2) |
There shall be a separate register for references under section 16B of the Act which shall contain the—
(d) |
nature of the Reference; and
|
|
|
PART II – APPEALS AND REFERENCES TO THE TRIBUNAL
9. |
Appeals
(1) |
A person aggrieved by a decision of the Bureau, or the Council may appeal to the Tribunal within fourteen days of notice of the decision.
|
(2) |
A person aggrieved by an order for destruction of goods as provided for in the Act may, within fourteen days of the notice of the order appeal to the Tribunal.
|
(3) |
A person who is aggrieved by a decision under a Standards Levy Order may appeal to the Tribunal within fourteen days of notice of the decision.
|
(4) |
An Accredited Conformity Assessment Body aggrieved by a decision of KENAS may within twenty one days from the date of such decision appeal to the Tribunal.
|
(5) |
Appeals to the Tribunal shall be filed by presenting a statement of appeal signed by the appellant or their recognized representative in Form ST. 2. set out in the First Schedule.
|
(6) |
Where any decision or order by the Bureau, Council or KENAS is appealed against, the execution of the decision or order shall not be carried out until the Tribunal has heard and determined the appeal.
|
|
10. |
Recognized Representatives
(1) |
In any proceedings before the Tribunal, a party may appear in person or be represented by—
(a) |
an advocate of their own choice; or
|
(b) |
in the case of a corporate body or a firm, an officer of the corporate body or firm duly authorized in writing by such body or firm.
|
|
(2) |
Despite paragraph (1), a party may, with the leave of the Tribunal, appoint any other person knowledgeable in the subject matter of the proceedings before the Tribunal to represent them in such proceedings.
|
(3) |
Appointment of an advocate or recognized representative shall be in the prescribed Form ST 1 set out in the First Schedule.
|
|
11. |
Language
(1) |
The language of the Tribunal is English.
|
(2) |
If a party or a witness does not understand English, the Tribunal shall provide an interpreter at no cost to the party or witness.
|
|
12. |
Statement of Appeal
(1) |
The statement of appeal shall contain—
(a) |
names and addresses of the parties;
|
(b) |
names and addresses of their recognized representatives (if any);
|
(c) |
copies of any written record of the decision being appealed against;
|
(d) |
the grounds on which the appellant relies;
|
(f) |
a schedule listing all the documents annexed to the statement of appeal.
|
|
(2) |
Unless the Tribunal otherwise directs, the statement of appeal shall be in five copies, signed by the appellant or the appellant’s recognized representative.
|
(3) |
Upon receipt of a statement of appeal, the Secretary shall—
(a) |
acknowledge receipt by stamping on the statement of appeal the date of receipt which date shall be the date of filing.
|
(b) |
enter the particulars of the appeal in a register kept by the Tribunal for that purpose;
|
(c) |
inform the parties in writing of the case number of the appeal as entered in the register; and
|
(d) |
advise the parties of the address to which notices and communications to the Tribunal shall be sent.
|
|
(4) |
The appellant may include in their statement of appeal, or in a separate application to the Tribunal—
(a) |
an application for an early hearing of the appeal; and
|
(b) |
the reasons for that application.
|
|
(5) |
The appellant shall, within fourteen days of filing an appeal, serve the statement of appeal and the supporting documents on the respondent.
|
|
13. |
Reference of a matter by the Director
(1) |
Where a matter is referred to the Tribunal for directions under section 16D of the Act, the Director shall provide the Tribunal with copies of all the relevant documentation relating to the matter and such other material as the Tribunal may require in order to determine the matter.
|
(2) |
The Director shall specify whether the matter appears to involve a point of law or is of unusual importance or complexity while referring the matter to the Tribunal.
|
(3) |
The Director shall serve any party interested in the matter with a copy of the documents provided to the Tribunal under paragraph (1) within fourteen days of referring the matter to the Tribunal.
|
(4) |
An interested party shall file a response within thirty days of notice of the reference from the Director.
|
(5) |
The Tribunal shall, after satisfying itself that all the necessary procedures have been followed set the matter for directions on the manner to proceed with the reference.
|
(6) |
The Tribunal shall thereafter determine the matter and give the necessary directions to the Director.
|
(7) |
The Tribunal shall inform any party, who had responded in accordance with this Rule of its directions made to the Director.
|
(8) |
A party dissatisfied with the decision of the Tribunal under this Rule may appeal to the High Court within fourteen days of the notice of the direction.
|
|
14. |
Dismissal of appeal
(1) |
The Tribunal may dismiss all or part of an appeal without holding a hearing if it decides that—
(a) |
the appeal is outside the jurisdiction of the Tribunal;
|
(b) |
the appeal was not filed within the time stipulated in the Act or KENAS Order;
|
(c) |
the appeal is frivolous, scandalous, vexatious, trivial or an abuse of the due process of the Tribunal;
|
(d) |
the appeal was made in bad faith or for an improper purpose; or
|
(e) |
the appeal does not disclose a reasonable cause of action.
|
|
(2) |
Where an appeal is dismissed under paragraph (1), the Tribunal shall notify the parties in writing giving reasons for the dismissal.
|
(3) |
In exercise of its power under this Rule, the Tribunal may act either on its own motion or on an application.
|
|
15. |
Service
(1) |
A document required to be sent to or served on any person under these Rules may be—
(a) |
delivered personally at the person’s address for service;
|
(b) |
mailed to the person’s address for service by registered post, or courier service;
|
(c) |
where authorized by the Tribunal, sent to the person by facsimile or other electronic means; and
|
(d) |
served through such other means as may be authorized by the Tribunal.
|
|
(2) |
A document which is sent or served in accordance with these Rules shall be deemed to have been received by or served on that person—
(a) |
in the case of personal delivery, on the date of delivery;
|
(b) |
when sent by registered post or courier service, on the seventh day after it was posted or dispatched;
|
(c) |
in the case of a facsimile transmitted on a business day before 5 p.m., on that day or, in any other case, on the business day after the day on which it is transmitted;
|
(d) |
in the case of electronic mail or similar means, on the second day after the day on which it is transmitted; and
|
(e) |
where any other method of service is permitted under paragraph (1)(d) above, such time as shall be specified by the Tribunal.
|
|
(3) |
Where the Tribunal has to proceed on the basis that there was service, the party shall prove to the satisfaction of the Tribunal that there was indeed service.
|
(4) |
If a document is served after 5 p.m. on a business day, or at any time on a Saturday, Sunday or a public holiday, the document shall be deemed to have been served on the next business day.
|
(5) |
The address for service for the purposes of proceedings before the Tribunal shall be in the case of any document addressed to—
(a) |
the Secretary, Standards Tribunal;
|
(b) |
the appellant or to their recognized representative, the address stated in the statement of appeal or such other address as may be provided to the Tribunal;
|
(c) |
the respondent, or their recognized representative the address stated in the statement of response, or such other address as may be provided to the Tribunal;
|
(d) |
an interested party, the address stated in the application for joinder of party or such other address as may be provided to the Tribunal.
|
|
(6) |
An item or document required to be sent to or served on a company is deemed as duly sent or served if it is sent to or left at the company’s registered address or it is served on a director or the company secretary.
|
(7) |
An item or document required to be sent to or served on a partnership is deemed to be duly sent or served if it is sent to or served on any of the partners.
|
(8) |
The Tribunal may dispense with service of a document if the interests of justice so require for reasons to be recorded.
|
|
16. |
Statement of response
(1) |
A respondent who wishes to oppose an appeal has fourteen days from the date of service of the statement of appeal to file and serve a statement of response containing the particulars prescribed under these Rules in the Form ST. 3. as set out in the First Schedule.
|
(2) |
Where no statement of response is received from the respondent, the Tribunal may proceed to hear the appeal or issue such directions as it may deem appropriate in the circumstances.
|
(3) |
The statement of response shall be signed and dated by the respondent, or the respondent’s recognized representative and shall contain—
(a) |
names and addresses of the parties;
|
(b) |
names and addresses of their recognized representatives (if any);
|
(c) |
the grounds of opposition, if any;
|
(d) |
a summary of the arguments of fact and law upon which the respondent intends to rely on; and
|
(e) |
a schedule listing all the documents annexed to the statement of response.
|
|
(4) |
There shall be annexed to the statement of response copies of the following documents-
(a) |
the documents the respondent wishes to rely on during hearing;
|
(d) |
an affidavit by the respondent verifying the facts contained in the statement of response and the authenticity of documents filed therewith;
|
(e) |
minutes of meetings or proceedings, if any, which arrived at the decision being appealed against.
|
|
(5) |
The Tribunal shall have the power to call for the record comprising any document in respect of which a decision appealed against was made.
|
(6) |
The respondent or recognized representative shall file six copies of signed statements of response.
|
(7) |
Despite paragraph (6), the respondent shall provide sufficient copies to be served on every party.
|
|
PART III – DIRECTIONS AND PRELIMINARY OBJECTIONS
17. |
Directions
(1) |
Within seven days of service of the statement of response the appellant shall with notice to the respondent set the matter for directions on the manner of hearing.
|
(2) |
The Tribunal may give directions—
(a) |
on the manner in which the proceedings are to be conducted, including any time limits to be observed in the conduct of the oral hearing;
|
(b) |
that the parties file a response, reply, rejoinder or other additional pleadings or particulars;
|
(c) |
for the preparation and exchange of skeleton arguments;
|
(d) |
requiring persons to attend and give evidence or to produce documents;
|
(e) |
on the evidence which may be required or admitted in proceedings before the Tribunal and the extent to which it shall be oral or written;
|
(f) |
on the submission in advance of the hearing of any witness statements or expert reports;
|
(g) |
on the examination or cross-examination of witnesses;
|
(h) |
on the fixing of time limits with respect to any aspect of the proceedings;
|
(i) |
on the reduction or extension of any time limits;
|
(j) |
to enable a decision to be referred back in whole or in part to the person by whom it was made;
|
(k) |
for the disclosure between, or the production by, the parties of documents or classes of documents;
|
(l) |
for the appointment and instruction of experts, whether by the Tribunal or by the parties and the manner in which expert evidence is to be given;
|
(m) |
for the award of costs or expenses, including any allowances payable to persons in connection with their attendance before the Tribunal; and
|
(n) |
for hearing a person who is not a party where, in any proceedings, it is proposed to make an order or give a direction in relation to that person; or
|
(o) |
as to the place of hearing of the appeal.
|
|
(3) |
The Tribunal may, of its own motion—
(a) |
put questions to the parties;
|
(b) |
invite the parties to make written or oral submissions on certain aspects of the proceedings;
|
(c) |
ask the parties or third parties for information or particulars;
|
(d) |
ask for documents or any papers relating to the case to be produced;
|
(e) |
summon the parties or their recognized representatives to appear before the Tribunal.
|
|
(4) |
If an appellant does not comply with paragraph (1), the respondent may—
(a) |
apply for the appeal to be dismissed for want of prosecution; or
|
(b) |
set the appeal down for hearing.
|
|
(5) |
The Tribunal may at any time of its own motion give such directions as it thinks fit to secure the just and expeditious conduct of proceedings.
|
|
18. |
Defective Pleading
If the Tribunal considers that any pleading—
(a) |
does not comply with the Rules;
|
(b) |
is materially incomplete; or
|
(c) |
is unduly long-winded or lacking in clarity, the Tribunal may give such directions as may be necessary to ensure that those defects are remedied.
|
|
19. |
Failure to comply with directions
(1) |
If a direction given to a party under these Rules is not complied with by such a party, the Tribunal may dismiss the whole or any part of the appeal, or, as the case may be, strike out the whole or any part of a respondent’s statement of response, and, where appropriate, give such directions as may be necessary in the circumstances.
|
(2) |
Despite paragraph (1), the Tribunal shall not dismiss an appeal or strike out a statement of response or give such a direction unless it has given notice to the party who has not complied with the direction a notice to show cause why it should not do so.
|
|
20. |
Varying or setting aside of orders
(1) |
Where a person to whom an order is addressed has not had an opportunity of objecting to the making of such order, the person may apply to the Tribunal to vary it or set it aside.
|
(2) |
Despite paragraph (1), the Tribunal shall not vary or set aside the order without—
(a) |
notifying the person in writing who had applied for the order; and
|
(b) |
taking into account any representations made by both parties.
|
|
(3) |
An application under this rule shall be made in Form ST. 4 as set out in the First Schedule.
|
|
PART IV – JOINDER AND CONSOLIDATION
21. |
Joinder of parties
(1) |
Where it appears to the Tribunal, on the application of a party or on its own motion, that it is necessary that a person be made a party to the proceedings, the Tribunal may order such person to be enjoined as a party and may give directions including directions on the delivery and service of documents.
|
(2) |
A person who considers that they have sufficient interest in the outcome of an appeal may apply to the Tribunal for leave to be enjoined in the proceedings.
|
(3) |
An application for leave to be enjoined shall be in Form ST 5 as set out in the First Schedule and shall state—
(a) |
the title of the proceedings to which that application relates;
|
(b) |
the name and address for service of the person wishing to join or intervene;
|
(c) |
grounds for seeking to intervene;
|
(d) |
a copy of every document on which the person relies; and
|
|
(4) |
The applicant shall, within seven days from the date of filing, serve a copy of the application on every party to the proceedings.
|
(5) |
Every party served under paragraph (4) may, within fourteen days of service, file a response in Form ST 6 as set out in the First Schedule.
|
(6) |
Where the Tribunal is satisfied, that the proposed joinder has sufficient interest in the matter before it, it may permit the joinder on such terms and conditions as it deems fit.
|
(7) |
The procedure for filing and service under Rule 15 shall apply with necessary modifications to an application and response under this Rule.
|
|
22. |
Consolidation
(1) |
Where two or more proceedings are pending in respect of the same subject of appeal, or which involve the same or similar issues, the Tribunal may, on the request of a party or of its own motion, order that the proceedings or any particular issue or matter raised in the proceedings be consolidated and heard together,
|
(2) |
Before making an order under this rule, the Tribunal shall invite the parties to the proceedings to make submissions as appropriate.
|
|
PART V – HEARING PROCEDURE
23. |
Hearing
(1) |
The time and place of a hearing in a proceeding shall be determined by the Secretary in consultation with the Chairperson.
|
(2) |
The Secretary shall give the parties at least fourteen days notice of a hearing.
|
(3) |
A hearing may be adjourned by the Tribunal on such terms as the Tribunal deems fit.
|
|
24. |
Hearing to be in public
(1) |
The proceedings of the Tribunal shall be open to the public except where the Tribunal, for sufficient cause, otherwise directs, taking into account—
(a) |
information the disclosure of which would in the Tribunal’s opinion, be contrary to public interest;
|
(b) |
commercial information the disclosure of which would in the Tribunal’s opinion, significantly harm the legitimate business interests of the undertaking to which the information relates;
|
(c) |
information relating to the private affairs of an individual the disclosure of which would, or might, in the Tribunal’s opinion, significantly harm their interests.
|
|
(2) |
The hearing of any application for an interim order may be held in Chambers.
|
|
25. |
Conduct of hearings
(1) |
At the beginning of the hearing, the chairperson shall explain the order of proceeding which the Tribunal proposes to adopt.
|
(2) |
Subject to paragraph (1), the Tribunal shall conduct its hearings in such manner as it considers most suitable to the clarification of the issues before it and generally to the just handling of the proceedings.
|
(3) |
The parties shall be heard in such order as the Tribunal shall determine and shall be entitled to give evidence, to call witnesses, to question any witnesses and to address the Tribunal on the evidence and the subject matter of the appeal.
|
(4) |
Evidence before the Tribunal may be given orally or, if the Tribunal so orders, by affidavit or written statement.
|
(5) |
The Tribunal may at any stage of the proceedings require the personal attendance of any deponent or author of a written statement.
|
(6) |
At any hearing the Tribunal may, if it is satisfied that it is just to do so, permit a party to rely on grounds not stated in the statement of appeal or, the reply where such grounds were not within the knowledge of the party at the time of filing.
|
(7) |
The Tribunal may make orders to secure the attendance of any person before the Tribunal, discovery or production of any document concerning a matter before the Tribunal as it deems necessary.
|
(8) |
The Tribunal shall require any witness giving evidence to swear an oath or make an affirmation.
|
(9) |
Unless the Tribunal otherwise directs, no witness shall be heard unless the relevant witness statement or expert report has been submitted in advance of the hearing and in accordance with any directions of the Tribunal.
|
|
26. |
Expert Evidence
(1) |
The Tribunal may seek the opinion or advice of experts on a technical matter before it, from persons who have been appointed in accordance with the Act.
|
(2) |
The experts referred to in paragraph (1) may be cross-examined by any of the parties and shall disclose any interest in the matter before the Tribunal or any subsequent interest acquired relating to the matter in question.
|
(3) |
An expert shall be paid such remuneration as the Cabinet Secretary may determine.
|
|
27. |
Contempt of Tribunal
(1) |
A person shall be held to be in contempt of the Tribunal where that person—
(a) |
fails to attend the Tribunal after having been required to do so under Rule 26;
|
(b) |
refuses to take an oath or affirmation before the Tribunal;
|
(c) |
fails to produce any article or document when lawfully required to do so by the Tribunal;
|
(d) |
knowingly gives false evidence or information which the person knows to be misleading before the Tribunal;
|
(e) |
at any sitting of the Tribunal willfully insults any member or officer of the Tribunal or willfully interrupts the proceedings;
|
(f) |
fails or neglects to comply with a decision, order, direction or notice confirmed by the Tribunal.
|
|
(2) |
The Tribunal may exclude from the hearing or any part of it any person who is in contempt under paragraph (1) until the contempt is purged.
|
|
PART V – DECISIONS
28. |
Decision
(1) |
Unless a unanimous decision is reached, a decision on any matter before the Tribunal shall be by a majority of votes of the members present and in case of an equality of votes, the Chairperson or the person presiding shall have a casting vote.
|
(2) |
The decision of the Tribunal shall be delivered in public on a date fixed for that purpose.
|
(3) |
(b) |
contain a summarized statement of the reasons for the decision; and
|
(c) |
be signed and dated by the chairperson and every member who heard the matter.
|
|
|
29. |
Application for Review
(1) |
Any person aggrieved by a decision of the Tribunal from which an appeal is allowed, but from which no appeal has been preferred and who from the discovery of new and important matter or evidence which, after the exercise of due diligence, was not within his knowledge or could not be produced by him at the time when the decision was made, or on account of some mistake or error apparent on the face of the record, or for any other sufficient reason, desires to obtain a review of the decision may apply for a review of judgment to the Tribunal without unreasonable delay.
|
(2) |
A party who is not appealing the decision of the Tribunal may apply for a review of the decision notwithstanding the pendency of an appeal by some other party except where the ground of such appeal is common to the applicant and the appellant, or when, being respondent, he can present to the High Court the case on which he applied for the review.
|
(3) |
An application for review of a decision of the Tribunal upon some ground other than discovery of such new and important matter or evidence as is referred to in paragraph (1), or the existence of a clerical or arithmetic mistake or error apparent on the face of the decision, shall be made in Form ST 7 as set out in the First Schedule.
|
(4) |
Where it appears to the Tribunal that there is no sufficient ground for a review, it shall dismiss the application.
|
(5) |
Where the Tribunal is of the opinion that the application for review should be granted, it shall grant the same, provided that no such application shall be granted on the ground of discovery of new matter or evidence which the applicant alleges was not within his knowledge, or could not be adduced by him when the decision was passed or made without strict proof of such allegation.
|
(6) |
The applicant shall within fourteen days of filing the application serve the application for review and the supporting documents on all the parties to the application.
|
(7) |
A party served under paragraph (6) has fourteen days from the date of service of the application to file and serve a statement of response.
|
(8) |
The statement of response under paragraph (7) shall be in Form ST 8 as set out in the First Schedule.
|
(9) |
When the application for review is granted, the Tribunal shall make such order in regard to the review as it thinks fit.
|
(10) |
No application to review a decision made on an application for a review of a decision shall be entertained.
|
|
30. |
Decision on review
(1) |
The decision of the Tribunal under Rule 29 may be made in the absence of the parties unless special circumstances render a hearing desirable.
|
(2) |
Where the decision is made in the absence of any party, the Secretary shall notify the absent party of the decision.
|
|
31. |
Costs.
(1) |
The Tribunal may, at any stage of the proceedings, make any order it may deem fit in relation to the payment of costs by one party to another in respect of the whole or part of the proceedings including an order for security for costs.
|
(2) |
The Tribunal may direct any party against whom an order for costs is made to pay such costs to any other party in a lump sum or such proportion of the costs as may be just.
|
(3) |
Where the Tribunal makes an order for costs under this Rule, the Tribunal may—
(a) |
assess the costs at the time of making the order; or
|
(b) |
direct that the costs be assessed on conclusion of the matter.
|
|
(4) |
Any costs required by an order under this Rule to be assessed may be assessed by the Secretary.
|
(5) |
The Tribunal may direct that witnesses’ expenses be paid to any witness.
|
|
32. |
Consent orders
(1) |
Where the parties agree the terms on which to settle proceedings, either wholly or in part, the parties may request the Tribunal to record a consent order.
|
(2) |
A request for a consent order shall be made by sending or delivering to the Secretary—
(a) |
a draft consent order; and
|
(b) |
a statement signed by all the parties to the proceedings or their recognized representatives requesting that an order be recorded in accordance with the draft consent order.
|
|
(3) |
The Tribunal shall, after ensuring that the consent is within the law, adopt the consent order as a decision of the Tribunal.
|
|
33. |
Interim orders
(1) |
The Tribunal may make an interim order—
(a) |
suspending, in whole or part, the effect of any decision which is the subject matter of an appeal or any other proceedings before it; or
|
(b) |
granting any remedy which the Tribunal would have the power to grant in its final decision.
|
|
(2) |
The Tribunal may make such orders or give such directions as it considers appropriate to—
(a) |
prevent substantial loss or irreparable damage to a particular person or category of persons; or
|
(b) |
protect the public interest;
|
|
(3) |
The Tribunal shall exercise its power under this Rule taking into account all the relevant circumstances, including—
(a) |
the urgency of the matter;
|
(b) |
the effect on the party making the request if the relief sought is not granted; and
|
(c) |
the effect on any interested party or the Bureau, Council or KENAS if the relief is granted.
|
|
(4) |
A party shall apply for an order or directions under paragraphs (1) and (2) above by filing an application with the Tribunal for interim relief stating the matters set out in paragraph (5);
|
(5) |
The application for interim relief shall be in form ST 9 as set out in the First Schedule and shall state—
(a) |
the subject matter of the proceedings;
|
|
(6) |
The Tribunal may, for the purposes of this Rule, join any party to the proceedings.
|
(7) |
Subject to paragraph (6), an order or direction for interim relief may be made against a person who is not a party to the proceedings, provided that such a person shall be accorded an opportunity to participate in subsequent proceedings.
|
(8) |
An application for an interim order may be heard in chambers.
|
(9) |
Ex parte interim Orders shall not be sustained for a period exceeding fourteen days.
|
|
34. |
Supporting affidavit
Every application or request under these Rules shall be supported by the affidavit of the applicant or the person making an application.
|
35. |
Interlocutory Applications
(1) |
Interlocutory matters arising in the course of proceedings before the Tribunal may be heard and determined by the chairperson.
|
(2) |
All interlocutory applications made to the Tribunal shall be by notice of motion in the prescribed Form ST 4 as set out in the First Schedule, signed by the applicant, their advocate or a duly authorized agent, and shall be supported by an affidavit.
|
(3) |
Any party who wishes to oppose an application shall file and serve a replying affidavit or grounds of opposition at least three clear days before the date of the hearing unless the Tribunal otherwise directs.
|
(4) |
Despite paragraph (3) the Tribunal may hear a party who has not filed a replying affidavit or grounds of opposition if the ends of justice so require.
|
(5) |
Upon making an application, the party shall within seven days or such other period as the Tribunal may direct, serve a copy of the application on all the other parties to the proceedings.
|
(6) |
The Tribunal shall give directions as to the manner of disposal of the application.
|
|
PART VI – MISCELLANEOUS
36. |
Computation of time
(1) |
Where a period expressed in days, weeks or months is to be calculated from the moment at which an event occurs or an action takes place, the day during which that event occurs or that action takes place shall not be counted as falling within the period in question.
|
(2) |
A period expressed in weeks or months shall expire at intervals of seven or thirty days respectively.
|
(3) |
Where the time prescribed by the Tribunal, the chairperson, the Secretary or by these Rules, for doing any act expires on an excluded day the act is on time if done on the next day immediately after the excluded day.
|
(4) |
The Tribunal may for good reason shown, on application, extend the time appointed by these Rules for doing any act or taking any proceedings, and may do so upon such terms and conditions, if any, as appear to it just and expedient.
|
(5) |
The extension of time referred to in paragraph (4) does not include time limited by the Act.
|
|
37. |
Irregularities
(1) |
Any irregularity resulting from failure to comply with any provision of these Rules shall not render the proceedings void where the irregularity does not occasion a miscarriage of justice.
|
(2) |
Where any irregularity comes to the attention of the Tribunal, it shall, if it considers any person may have been prejudiced by the irregularity, give such directions as it deems just, to cure or waive the irregularity before reaching its decision.
|
(3) |
Clerical mistakes in any document recording a direction, order or decision of the Tribunal, or errors arising in such a document from an accidental slip or omission, may be corrected by the chairperson, by certificate under the chairperson’s hand.
|
|
38. |
Prescribed forms
(1) |
The forms prescribed in the First Schedule to these Rules shall, with such modifications as may be necessary, be used for the purposes of filing appeals, applications, responses or any other documents.
|
(2) |
Despite paragraph (1), an instrument or document which deviates from the prescribed form shall not be void by reason of a deviation that does not affect the substance of the instrument or document, unless it is calculated to mislead.
|
|
39. |
Recording of proceedings
The proceedings before the Tribunal shall be recorded in such form or manner as the Tribunal may determine.
|
40. |
Protection from personal liability
The chairperson, member or secretary of the Tribunal, shall not be personally liable for any act done or omitted to be done by them in the discharge of their duty as chairperson, member or Secretary of the Tribunal, whether or not within the limits of their jurisdiction if at the time, in good faith, believed themselves to have jurisdiction to do or order the act complained of.
|
41. |
Practice directions
The Chairperson may issue practice directions in relation to the procedures provided for by these Rules.
|
42. |
Oath of Office
A person, who is appointed chair person, member or secretary of the Tribunal, shall take and subscribe to an oath of allegiance to the office before assuming the duties of that office, administered by the Chief Justice.
|
43. |
Powers of Tribunal
(1) |
The Tribunal may, at its discretion where both or all the parties to an appeal agree in writing upon the terms on which an appeal or issue should be decided, confirm the agreement reached by such parties and decide accordingly.
|
(2) |
The Tribunal shall enforce its orders and decisions.
|
|
44. |
Disclosure of interest
Where a member of the Tribunal, has any interest, that could conflict with the proper performance of the member’s functions, the member shall disclose the interest to the parties to the proceedings and shall not participate during any deliberations on the matter by the Tribunal.
|
45. |
Quorum of the Tribunal
Except where otherwise specifically provided for in these Rules, for purposes of proceedings before the Tribunal, quorum shall be the Chairperson and two members.
|
46. |
Official seal
The Tribunal shall have an official seal.
|
47. |
Fees
(1) |
There shall be paid to the Tribunal such filing and other fees, including fees for service by the Tribunal of any notice or process, as prescribed in the Second Schedule.
|
(2) |
The Tribunal may, if it considers it to be in the interest of justice, and for reasons to be recorded waive or postpone on all or any of the fees payable to the Tribunal.
|
|
FIRST SCHEDULE
FORMS
FORM ST I
|
(r. 10)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
NOTICE OF APPOINTMENT OF ADVOCATE/RECOGNIZED REPRESENTATIVE
TAKE NOTICE THAT the appellant/respondent has appointed .................... to act for him in this matter.
Address for service .......................................................................
Dated at .......................... this ................. day of ............................
|
......................................ADVOCATE/RECOGNIZED REPRESENTATIVE
|
DRAWN AND FILED BY:......................................................
|
|
TO BE SERVED UPON:............................................................................................................
|
|
FORM ST 2
|
(r. 9)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
(Being an appeal against the respondent's decision dated ......)
1. |
Appellant's address for service .................................
.............................................
|
2. |
Names and address of appellant's recognized representative (where applicable)
.............................................
|
3. |
Respondent's addrcss for service .............................
..................................................
|
4. |
Grounds of appeal and concise arguments in support thereof:
.........................................
.........................................
|
5. |
Relief sought:
................................................
.................................................
Dated at.................. this ... ... .... Day of 20 .........................
*attach schcdule listing all documents in support of the appeal
|
.......................Appellant/Appellant's Recognized representative
|
Drawn & Filed by:
|
|
To served upon:
|
|
FORM ST 3
|
(r. 16)
|
REPUBLIC OF KENYA
|
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
1. |
Respondent's address for service ...................................
|
2. |
Name and address of Respondent's recognized representative (where applicable)
....................................................
|
3. |
Grounds of opposition ........................................
|
4. |
CROSS APPEAL- (where applicable)
Grounds ..................................................
...........................................................
|
5. |
Relief sought: ...........................................
..............................................................
................................................................
Datcd at ................ This ................ Day of 20 .....................
*Attach list of documents in support of the statement of response
|
...................Respondent/Respondent's Recognized representative
|
Drawn & Filed by:
|
|
To served upon:
|
|
FORM ST 4
|
(r. 20, 35)
|
REPUBLIC OF KENYA
|
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
(under rule..... of the Standard Tribunal Rules...)
TAKE NOTICE that ............ this Tribunal shall be moved on the ......... day of .........in the forenoon or soon thereafter by ........... for orders that
1. ............................................
2. .............................................
3. ..............................................
This application is supported by the affidavit of ................... and based on the following grounds:
1. ............................................
2. .............................................
3. ..............................................
Dated at .......................... This ................... day 20 .................
|
.............Applicant/ Recognized representative
|
Drawn & Filed by:
|
|
To be served upon:
|
|
FORM ST 5
|
(r. 21)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
APPLICATION FOR JOINDER OF PARTIES
1. Name and address for /proposed interested party .......................
............................................
2. Matters in the appeal affecting proposed interested party ......................
.............................................
3. Grounds for seeking to be enjoined ..........................
..............................................
4. Prayer in the appeal whose position proposed interested party supports:
This application is supported by the affidavit of ................... and based on the following grounds:
1. ............................................
2. .............................................
3. ..............................................
Dated at .......................... This ................... Day of 20 .................
|
..................................................Applicant/ Recognized representative
|
Drawn & Filed by:
|
|
To served upon:
|
|
FORM ST 6
|
(r. 21)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
RESPONSE ON APPLICATION FOR JOINDER OF PARTIES
Name and address for /proposed interested party
...............................................
Matters in the appeal affecting proposed interested party
......................................................
......................................................
Grounds for seeking to be enjoined .........................
.................................................................
Prayer in the appeal whose position proposed interested party supports:
..............................................................
Dated at ............. This .............. Day of 20 .................
|
................Interested Party/Recognized representative
|
Drawn & Filed by:
|
|
To served upon:
|
|
FORM ST 7
|
(r. 29)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 ..........
........................................................................ APPELLANT
......................................................................... RESPONDENT
Name and address of party applying for review ...................................
...............................................
Decision sought to be reviewed ......................................
......................................................
Grounds for review ...........................................
.................................................................
Dated at ............. This .............. Day of 20 .................
|
.................Party/Party's Recognized representative
|
FORM ST 8
|
(r. 29)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
STATEMENT OF RESPONSE ON REVIEW
Name and address of party applying for review .........................
..................................................
.................................................
Application of review being supported/opposed:
...........................................
Grounds for opposing/supporting review:
.............................................
................................................
Dated at .......................... This ................... Day of 20 .................
FORM ST 9
|
(r. 33)
|
REPUBLIC OF KENYA
|
IN THE STANDARDS TRIBUNAL AT..........................
TRIBUNAL APPEAL NO....................... OF 20 .....................
........................................................................ APPELLANT
......................................................................... RESPONDENT
APPLICATION FOR INTERIM RELIEF
Name and address of party requesting for interim relief: .................
..................................................
.................................................
Relief sought:
...........................................
Circumstances, if any, for the request to be treated with urgency:
.......................................
......................................
Grounds for making the request:
.....................................
Dated at .......................... This ................... Day of 20 .................
|
................Applicant/Applicant's Recognized representative
|
SECOND SCHEDULE [r. 47]
FEES
|
Fees (KSh .)
|
(a) Upon filing an appeal, where the value of the subject matter
|
|
(i) is unliquidated or does not exceed shs.50,000
|
2,000
|
(ii) exceeds KSh. 50,000 but does notexceed KSh. 550,000
|
2,000 And KSh. 100 for each KSh. 5,000 or part thereof in excess of KSh. 50 ,000
|
(iii) exceeds KSh. 550,000
|
12,000 and KSh. 100 for each KSh . 5,000 or part thereof in excess of KSh. 50,000 up to a maxi mum fee of KSh . 100,000
|
(b) Upon filing a statement of response-
|
|
(i) without a cross appeal
|
500
|
(ii) with a cross appeal
|
A fee calculated in accordance with paragraph 1 of the Schedule
|
(c) Upon filing any application or request
|
1,000
|
(d) Upon filing a notice of preliminary objection
|
1,000
|
(e) Withdrawal of appeal
|
500
|
(f) Consent order
|
1,000
|
(g) Upon filing a reply or response to an application or request
|
500
|
(h) For sealing a decree or order
|
1,000
|
(i) Upon filing a document where no other fees is prescribed under this Schedule
|
200
|
(h) For certifying or attesting a signature or seal on a document
|
100
|
(k) For a certified copy of the record of the proceedings of the Tribunal or a document in its archives, per page or part thereof
|
30
|
(l) For service of any document by the Tribunal
|
|
(i) within 10km of the Tribunal
|
200
|
(ii) for everv kilometers after the first 10km
|
20
|
1. |
This order may be cited as the Standards Order.
|
2. |
Kenya Standards having been declared as set out in the first and second column of the schedule, no person shall manufacture or sell the commodities or use the methods and procedure on or after forty-two (42) days of the date of publication of this Order unless the commodities, methods or procedures comply with the requirements of the relevant Kenya Standard.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 2231:2012
|
Kenya Standard - Antibacterial bathing bars - Specification, Second Edition.
|
KS 804-1:2012
|
Kenya Standard - Antibacterial toilet soap - Specification, Part l: Solid cake, Second Edition.
|
KS 804-2-2012
|
Kenya Standard - Antibacterial toilet soap - specification, Part 2 Liquid, Second Edition .
|
KS 2415:2012
|
Kenya standard - Liquid hand wash - Specification, First edition.
|
KS 2408:2012
|
Kenya Standard - Soap starch - Specification, First Edition.
|
KS 551:2012
|
Kenya Standard - Emulsified sauces - Specification, Third Edition.
|
KS 326 -11:2012
|
Kenya Standard - Edible fats and oils Part 1: Palm olein- Specification, Second Edition.
|
KS 326-12:2012
|
Kenya Standard - Edible fats and oils Part 2: Palm Stearin - Specification, Second Edition.
|
KS EAS 89:2011
|
Kenya Standard - Millet Flour - Specification, First Edition.
|
KS EAS 95:2011
|
Kenya Standard - Sorghurm Flour - Specification, First Edition.
|
KS2131:2012
|
Kenya Standard - Tamarind concentrate - Specification, First Edition.
|
KS 2430:2012
|
Kenya Standard - Ginger paste - Specification, First Edition.
|
KS 2431:2012
|
Kenya Standard - Garlic paste - Specification, First Edition.
|
KS 2132:2012
|
Kenya Standard - Garam masala - Specification, First Edition.
|
KS ISO 10621:1997
|
Kenya Standard - Dehydrated green pepper (Pepper nigrum L). Specification First edition.
|
KS ISO 5559 1995
|
Kenya Standard - Dehydrated onion (Allium cepa linnaeus). Specification First Edition.
|
KS ISO 972:1997
|
Kenya Standard - Chillies and capsicums, whole or ground (powdered) - specification First Edition.
|
KS 1SO 11162:2001
|
Kenya Standard - Pepper corns (piper nigrum l.) in brine specification First Edition.
|
KS 2422:2012
|
Kenya Standard - Potassium sulphate fertilizer, technical grade -Specification, First Edition.
|
KS 2423:2012
|
Kenya Standard - Magnesium nitrate fertilizer, technical grade -Specification, First Edition.
|
KS 2424:2012
|
Kenya Standard - Monoammonium/ diammonium phosphate fertilizer, technical grade - Specification, First Edition.
|
KS 2425:2012
|
Kenya Standard - Potassium nirate fertilizer, technical grade - Specification, First Edition.
|
KS 2426:2012
|
Kenya Standard - Monopotassium phosphate fertilizer, technical grade - - Specification, First Edition.
|
KS 2420-1-2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 1: General, First Edition.
|
KS 2420-2-2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 2: pipes, First Edition.
|
KS 2420-3-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 3: Fitting, First Edition.
|
KS 2420-4-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 4 valves, First Edition.
|
KS 2420-5-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 5 Fitness for purpose First Edition.
|
KS 2419:2012
|
Kenya standard - Thermoplastics and flexible metal pipe - work for underground installation at petrol filling stations Specification, First Edition.
|
KS 911: 1990
|
Kenya Standard - Specification for flat paint brushes.
|
KS 1104:1992
|
Kenya Standard - Specification for iron oxide pigments for paints.
|
KS 2089 - 1-2007
|
Kenya Standard - Crockery ware Part 1: Porcelain Crockery ware - Specification.
|
KS 2089-2:-2007
|
Kenya Standard - Crockery ware Part 2: Fine (bone) china Crockery ware - Specification.
|
KS 2089-3:-2007
|
Kenya Standard - Crockery ware Part 3: Stone ware Crockery ware – Specification.
|
KS 2089-4:-2007
|
Kenya Standard - Crockery ware Part 4: Vitreous china Crockery ware – Specification.
|
KS 2420-1-2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part l: General, First Edition.
|
KS 2420:-2-2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 2: Pipes, First Edition.
|
KS 2420-3-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 3: Fitting, First Edition.
|
KS 2420-4-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 4: valves, First Edition.
|
KS 2420-5-:2012
|
Kenya Standard - Plastics piping systems for the supply of gaseous fuels - polyethylene (PE) Part 5: Fitness for purpose First Edition.
|
KS 2419:2012
|
Kenya Standard - Thermoplastics and flexible metal pipe-work for underground installation at petrol filling stations Specification, First Edition.
|
KS 812:2012
|
Kenya Standard -Matt emulsion paints for interior and exterior use-Specification, Second Edition.
|
KS 1O27-1:2012
|
Kenya Standard-Auto refinishing paints-Specification Part 1: Synthetic resin based, Second Edition.
|
KS 1O27-2:2012
|
Kenya Standard-Auto refinishing paints-Specification Part 2: Nitrocellulose resin based, Second Edition.
|
KS 1276:2012
|
Kenya Standard-Air dried roofing paints-Specification , Second Edition.
|
KS 1716:2012
|
Kenya Standard-2-Pack acrylic resin-based auto-refinishing paint-Specification, Second Edition.
|
KS 2351:2012
|
Kenya Standard-Surgical spirit-Specification, First Edition.
|
KS 2350:2012
|
Kenya Standard-Sodium silicate-Specification, First Edition.
|
KS 814:2012
|
Kenya Standard Retroreflective sheeting Materials Specification, Third Edition..
|
KS 2359:2012
|
Kenya Standard-Polystyrene (crystal and high impact) for its safe use in contact with foodstuffs, pharmaceuticals and drinking water-Specification, First Edition.
|
KS 2361:2012
|
Kenya Standard-Positive list of constituents of polystyrene (crystal and high impact) in contact with foodstuffs, pharmaceuticals and drinking water, First Edition.
|
KS 2362:2012
|
Kenya Standard-Polyvinyl chloride (PVC) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification, First Edition.
|
KS ISO 11833-1: 2007
|
Kenya Standard-Plastics-Unplasticized poly(vinyl chloride)sheets -Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm, Second Edition.
|
KS 2345:2012
|
Kenya Standard-Synthetic detergent paste-Specification , First edition.
|
KS 2346:2012
|
Kenya Standard-Instant Hand Sanitizer-Specification , First edition.
|
KS 483:1984
|
Kenya Standard-Specification for base paper for carbon paper.
|
KS ISO 415:1975
|
Kenya Standard-Envelopes, postcards and similar articles - Cancellation area.
|
KS ISO 618:1974
|
Kenya Standard-Paper-Articles of stationery that include detachable sheets-Overall trimmed sizes.
|
KS ISO 838:1974
|
Kenya Standard-Paper-Holes for general filing purposes Specifications.
|
KS ISO 22414:2004
|
Kenya Standard Paper Cut-size office paper Measurement of edge quality.
|
KS 1934:2006
|
Kenya Standard-Black web offset ink -Specification.
|
KS 90:2006
|
Kenya Standard-Black lead pencil -Specification.
|
KS 1833:2006
|
Kenya Standard-Dyes for water-based writing inks-Specification.
|
KS 397:1996
|
Kenya Standard-Specification for graphite for black lead pencil slips.
|
KS 1025:2003
|
Kenya Standard-Metre rules and rulers for schools and office use-Specification.
|
KS 2348-1:2012
|
Kenya Standard-Food Supplements-Specification Part 1: Vitamin and mineral, First Edition.
|
KS 2348-2:2012
|
Kenya Standard-Food Supplements-Specification Part 2: Lipid based food supplement, First Edition.
|
KS 2310:2012
|
Kenya Standard-Edible meat co-products-Specification, First Edition.
|
KS 2308:2012
|
Kenya Standard-Soup stock medium (beef)-Specification, First Edition.
|
KS 2325:2012
|
Kenya Standard-Rabbit feed supplements-Specification, First Edition.
|
KS 954:2012
|
Kenya Standard-Maize gluten feed-Specification, Second Edition.
|
KS 2358:2012
|
Kenya Standard-Maize gluten feed-Specification, First Edition.
|
KS 785:2012
|
Kenya Standard-Bone meal-Specification, Second Edition.
|
KS 2356:2012
|
Kenya Standard-Bio fertilizer-Specification, First Edition.
|
KS 46:2012
|
Kenya Standard-Granulated superphosphate fertilizers- Specification, Third Edition.
|
KS 158:2012
|
Kenya Standard-Solid compound fertilizers-Specification, Fourth Edition.
|
KS 1673-1:2004
|
Kenya Standard-Solar photovoltaic power systems-Design, installation, operation, monitoring and maintenance-Code of practice Part 1: General PV system requirements.
|
KS 1674:2003
|
Kenya Standard-Crystalline silicon terrestrial photovoltaic (PV) modules-Design qualification and type approval.
|
KS 1526-1:2003
|
Kenya Standard-Manual toothbrush-Specification Part 1: Conventional reusable type.
|
KS 1526-2:2005
|
Kenya Standard-Manual toothbrush-Specification Part 2: Single-use toothbrush.
|
KS 1527:2001
|
Kenya Standard-Specification for mouthwash preparations.
|
KS 1736:2003
|
Kenya Standard-Dental porcelain - Specification.
|
KS 1818:2005
|
Kenya Standard-Sterile surgical suture and ligature materials Specification.
|
KS 983:1999
|
Kenya Standard-Specification for incineration for plant for the destruction of hospital waste.
|
KS 1726:2012
|
Kenya Standard - Footwear - Men closed shoes - Specification.
|
KS 1727:2012
|
Kenya Standard Footwear - Men open shoes - Specification.
|
KS 1728:2012
|
Kenya Standard Footwear Ladies closed shoes- Specification.
|
KS 1729:2012
|
Kenya Standard Footwear Ladies open shoes Specification.
|
KS 1730:2012
|
Kenya Standard-Footwear - Sports shoes - Specification.
|
KS 1731:2012
|
Kenya Standard-Footwear - Children' shoes - Infants (2 years and below) - Specification.
|
KS 1132:2012
|
Kenya Standard-Footwear - Children' shoes (above 2 to 6 years) - Specification.
|
KS 583:2012
|
Kenya Standard-Socks - Specification.
|
KS 1442:2012
|
Kenya Standard-Granite tiles and slabs-Specification, First Edition.
|
KS 22:1990
|
Kenya Standard-Specification for hot rolled mild steel bars for reinforcement of concrete.
|
KS 105:1982
|
Kenya Standard-Specification for hard-drawn steel wire for reinforcement of concrete.
|
KS 572:1986
|
Kenya Standard-Specification for hot-rolled structural steel sections.
|
KS ISO 15877-1:2009
|
Kenya Standard-Plastics piping systems for hot and cold water installations - Chrolinated poly(vinyl chloride) (PVC-C) Part 1 : Fittings :Chlorinated.
|
KS ISO 15877-2:2009
|
Kenya Standard-Plastics piping systems for hot and cold water installations - Chrolinated poly(vinyl chloride) (PVC-C) Part 2 :Fittings :Chlorinated.
|
KS ISO 15877 -3:2009
|
Kenya Standard-Plastics piping systems for hot and cold water installations - Chrolinated poly(vinyl chloride) (PVC-C) Part 3 :Fittings :Chlorinated.
|
KS ISO 15811-5:2009
|
Kenya Standard-Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system, First Edition.
|
KA ISO/TS 15877-1:2009
|
Kenya Standard-Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity, First Edition.
|
KS ISO 24415-2
|
Kenya Standard-Tips for assistive products for walking-Requirements and test methods Part 2: Durability of tips for crutches, First Edition.
|
KS ISO 11334-1:2007
|
Kenya Standard-Assistive products for walking manipulated by one arm-Requirements and test methods Part l: Elbow crutches, First Edition.
|
KS ISO 11334-4:1999
|
Kenya Standard-Assistive products for walking manipulated by one arm-Requirements and test methods Part 4: Walking sticks with three or more legs, First Edition.
|
KS 334:2012
|
Kenya Standard-Fuel filters-Specification, Second Edition.
|
KS 294:2012
|
Kenya Standard - Air filters - Specification, Second Edition.
|
KS 2312:2012
|
Kenya Standard - Three wheelers - Specification, First Edition.
|
KS 2046:2012
|
Kenya Standard - Road vehicles-Rear underrun protection devices-Specification, First Edition.
|
KS 260:1982
|
Kenya Standard-Specification for laminated leaf springs for automobiles.
|
KS 487:1987
|
Kenya Standard-Specification for hose couplings for petrol, diesel and paraffin.
|
KS 52-1:1997
|
Kenya Standard-Specification for vehicle exhaust systems Part l: Motor vehicles exhaust systems.
|
KS 700: 1990
|
Kenya Standard Specification for inner tyre tubes for motorized vehicles.
|
KS 701:1996
|
Kenya Standard-Specification for tyre valves.
|
KS 823:1993
|
Kenya Standard Specification for v-belts for industrial machines.
|
KS 249:1988
|
Kenya Standard-Specification for automobile drum brake lining and disc brake pads.
|
KS 463:2005
|
Kenya Standard-Telescopic shock absorbers for automobile suspension damping-Specification.
|
KS 802-1: 1989
|
Standard - Specification for cut -size office papers - Part l: Bond Papers.
|
KS 921: 1991
|
Kenya Standard - Specification for kraft liner.
|
KS 388: 1984
|
Kenya Standard - Specification for base paper for waxed bread wrapl47 KS 483: 1984 Kenya Standard - Specification for base paper for carbon paper.
|
KS 603:2002
|
Kenya Standard - Specification for files and folders (Second Edition).
|
KS 802-1:2001
|
Kenya Standard- Specification for cut-size office papers - Part l: General purpose paper (Second Edition).
|
KS 802-:2001
|
Kenya Standard - Specification for cut-size office papers - Part 2: Photocopy papers -Part 2 Photocopy paper (Second Edition).
|
KS 948: 1999
|
Kenya Standard - Specification for comrgated fibreboard boxes for export of horticultural produce (Second Edition).
|
KS 911: 1990
|
Kenya Standard - Specification for flat paint brushes
|
KS 1104: 1992
|
Kenya Standard - Specification for iron oxide pigments for paints.
|
KS 163:2000
|
Kenya Standard - Colours for ready mixed paints (Second Edition).
|
KS 1918:2005
|
Kenya Standard- Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides -Specification.
|
KS 1919:2005
|
Kenya Standard- Chemicals used for ffeatment of water intended for human consumption Poly(diallyldimethylammonium chloride) (poly DADMAC)-Specification.
|
KS 1920:2005
|
Kenya Standard - Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides -Specification.
|
KS 1940:2005
|
Kenya Standard - Chemical used for treatment of water intended for human consumption (Polyamines) - Specification.
|
KS 376-0:2005
|
Kenya Standard-Flexible polyurethane(polyether) foams - Specification - Part 0: General requirements.
|
KS 376-1:2005
|
Kenya Standard - Flexible polyurethane (polyether) foams - Specification - Part l: Mattresses (Third Edition).
|
KS 376-2:1999
|
Kenya Standard- Specification for flexible polyurethane foams-Part 2 Reconstituted flexible polyurethane foam.
|
KS 1267:1995
|
Kenya Standard - Specification for flexible polyurethane foam pillows for domestic use.
|
KS 1266: 1995
|
Kenya Standard - Specification for polyester body fillers.
|
KS 1273: 1995
|
Kenya Standard- Specification for unsaturated polyester resin for body fillers.
|
KS 807-5: 1997
|
Kenya Standard - Specification for polishes - Part 5: Floor polish pigmented paste type.
|
KS 807-6: 1996
|
Kenya Standard - Specification for polishes - Part 6: Automobile polish, wax solvent paste type.
|
KS 807-7:1997
|
Kenya Standard - specification for polishes- Part 7: Wooden furniture polish paste.
|
KS 807-8: 1996
|
Kenya Standard - Specification for polishes- Part 8: Automobile polish - liquid.
|
KS 1578-2:1999
|
Kenya Standard - Specification for metal polishes - Part 2: Special metal polishes.
|
KS 221: 1983
|
Kenya Standard - Specification for lime for chemical industry.
|
KS 1738-2:2001
|
Kenya Standard - Specification for ceramic floor and wall tiles Part 2 : Extruded ceramic tiles with low water absorption E<= 3 percent
|
KS 1738-3:2001
|
Kenya Standard - Specification for ceramic floor and wall tiles Part 3 : Extruded ceramic tiles with low water absorption 3 percent <=E<=6 percent.
|
KS 1738-4:2001
|
Kenya Standard- Specification for ceramic floor and wall tiles.Part 4: Extruded ceramic tiles with low water absorption of 6<E<10 percent.
|
KS 1738-5: 2001
|
Kenya Standard - Specification for ceramic floor and wall tiles-Part 5: Dust -pressed tiles ceramic tiles with low water absorption E<=3 percent.
|
KS 1738-6-2001
|
Kenya Standard - Specification for ceramic floor and wall tiles-Part 2: Dust -pressed tiles ceramic tiles with low water absorption E<=3 percent.
|
KS 1738-7: 2001
|
Kenya Standard- Specification for ceramic floor and wall tiles-Part 2: Dust - pressed tiles ceramic tiles with low water absorption 3 percent<=E<=6 percent.
|
KS 1738-8:2001
|
Kenya Standard- Specification for ceramic floor and wall tiles-Part 2: Dust - pressed tiles ceramic tiles with low water absorption 6<E <=10 percent.
|
KS 1738-9-2001
|
Kenya Standard- Specification for ceramic floor and wall tiles-Part 2: Dust - pressed tiles ceramic tiles with low water absorption E>10 percent.
|
KS 230: 1980 (Confirmed 2005)
|
Kenya Standard- Brilliant Blue, FCF, food grade- Specification (First Edition).
|
KS 231: 1980 (Confirmed 2005)
|
Kenya Standard - Aorubine (caarmoisine), food grade- Specification (First Edition).
|
KS 1550:1999
|
Kenya Standard - Specification for carbon carbonation of beverages, First Edition.
|
KS 1932:2006
|
Kenya Standard- Sodium benzoate, food grade-specification, First Edition.
|
KS 428: 1984 (Confirmed, 1999)
|
Kenya Standard- Specification for ascorbic acid food grade, First Edition.
|
KS 1790:2003
|
Kenya Standard - Animal Ghee-Specification, First Edition.
|
KS 1054-1:2006
|
Kenya Standard - Cereal malt extract based energy drink - Specification, Second Edition.
|
KS 1991:2006
|
Kenya Standard- Electrolytic drinks- Specification, First Edition.
|
KS 1931:2005
|
Kenya Standard- High proteins mixes for use as food supplements - Specification, First Edition.
|
KS 1991:2006
|
Kenya Standard- Electrolytic drinks - Specification, First Edition.
|
KS 1054-2: 2006
|
Kenya Standard - Energy drinks-Specification - Part 2 : Cereal malt extract based energy drinks (First Edition).
|
KS 1484: 1999
|
Kenya Standard - Specification for asparagus (Canned).
|
KS 1173: 1984
|
Kenya Standard- Specification for canned plums.
|
KS 1174: 1996
|
Kenya Standard - Specification for canned pears.
|
KS 1175: 1994
|
Kenya Standard- Specification for canned guava.
|
KS 1177: 1996
|
Kenya Standard- Specification for canned grapefruits.
|
KS 1178: 1994
|
Kenya Standard - Specification for canned tropical fruit salad.
|
KS 1179: 1996
|
Kenya Standard - Specification for canned fruit cocktail.
|
KS 1311:1996
|
Kenya Standard - Specification for canned beans in tomato sauce (Baked beans).
|
KS 139: 1980
|
Kenya Standard - Specification for jams, jellies and marmalades.
|
KS 224:1998
|
Kenya Standard - Specification for fruit squashes (Second Edition).
|
KS 318: l98l (Confirmed, 1999)
|
Kenya Standard - Specification for canned pineapples.
|
KS 328-1 and 2:1984
|
Kenya Standard - Specification for soft fruit based soft drinks Part I and 2 (Second Edition).
|
KS 341: 1980 (Confirmed, 1999)
|
Kenya Standard-Specification for canned green peas.
|
KS 342: 1981
|
Kenya Standard-Specification for canned green beans and canned wax beans.
|
KS 343: 1981
|
Kenya Standard - Specification for canned mushrooms.
|
KS 435: 1993 (Confirmed, 1999)
|
Kenya Standard.
|
KS 753: 1989 (Confirmed, 1999)
|
Kenya Standard - Specification for chilli sauce.
|
KS 1740:2001
|
Kenya Standard - Specification for dried mangoes.
|
KS 1772:2003
|
Kenya Standard - Specification for jelly powder and jelly crystals.
|
KS 554:2004
|
Kenya Standard - Apple fruit juice preserved exclusively by physical means-Specification.
|
KS 1078:1990 (Confirmed, 1999)
|
Kenya Standard-Specification for chillies.
|
KS 1367: 1997
|
Kenya Standard- Specification for fruit chutney.
|
KS 1094-3: 1997
|
Kenya Standard - Specifications for Crisps- Part 3: Banana Crisps.
|
KS 1517: 1999
|
Kenya Standard - Specification for edible ices and ice mixes.
|
KS 1092:2006
|
Kenya Standard- Whole turmeric rhizomes - Specification (Second Edition).
|
KS 1154:2006
|
Kenya Standard - Whole dried and ground ginger- Specification (Second Edition).
|
KS 1088-2:2001
|
Kenya Standard - Specification for soups and broths - Part 2 Canned soups and broths (Second Edition).
|
KS 1756:2001
|
Kenya Standard - Specification for flavoured milk.
|
KS 29:2001
|
Kenya Standard - Specification for milk powders and cream powders (Third Edition).
|
KS 28-6: 1997
|
Kenya Standard- Specification for cheese - Part 6: cream cheese (Rahmfrisckase).
|
KS 35: 1977 (Confirmed, 1999)
|
Kenya Standard- Specification for dairy cream for directconsumption(Second Edition).
|
KS 703: 1993 (Confirmed, 1999)
|
Kenya Standard - Specification reconstituted/recombined milk. for pasteurized.
|
KS 941:1993 (Confirmed, 1999)
|
Kenya Standard - Specification for fermented (Cultured) milk.
|
KS 941: 1993 (Confirmed, 1999)
|
Kenya Standard- Specification for fermented (Cultured ) milk.
|
KS 522-1: 1987
|
Kenya Standard - Specification for canned fish-Part 1: Fish canned in tomato sauce.
|
KS 522-2:1987
|
Kenya Standard-Specification for canned fish - Part 2: Fish canned in brine.
|
KS 522-3:1987
|
Kenya Standard- Specification for canned fish - Part 3: Fish canned in oil.
|
KS 444:1984
|
Kenya Standard - (Confirmed,1999)- Specification on concrete roofing tiles.
|
KS 1933:2005
|
Kenya Standard- Concrete poles for telephone, power and lighting purposes- Specification - Civil.
|
KS 548:1986
|
Kenya Standard - Specification for precast concrete pipes and fittings for drainage, sewerage and culverts.
|
KS 830: 1984
|
Kenya Standard - Specification for precast concrete paving slabs.
|
KS 625: 1987
|
Kenya Standard - (Confirmed, 1999)- Specification for precast masonry units.
|
KS 749: 1991
|
Kenya Standard- (Confirmed, 1999) - Specification for fibre concrete roofing tiles.
|
KS 827:2003
|
Kenya Standard- Specification for precast concrete paving blocks (Second Edition).
|
KS 829:2000
|
Kenya Standard- Specification for precast concrete flags, kerbs, channels, edgings and quadrants.
|
KS 2025:1987
|
Kenya Standard - Metal roofing tiles- Specification.
|
KS 624: 1986
|
Kenya Standard - Specification for bitumen roofing felts.
|
KS 657:1988
|
Kenya Standard - (Confirmed,l999)- Specification for window stays, fasteners and handles for vertically hinged windows.
|
KS 997: 1994
|
Kenya Standard- (Confirmed, 1999) - Specification for joints in building fundamental principles of design.
|
KS 998:1994
|
Kenya Standard - (Confirmed , 1999) - Specification for joint buildings - general check list of joint functions.
|
KS 1186-2003
|
Kenya Standard - Specification for reinforced concrete fencing posts and struts.
|
KS 97:1982
|
Kenya Standard - Specification and methods of test for buiiding limes (Quicklime and hydrated lime).
|
KS 979:1998
|
Kenya Standard- Specification for gypsum plaster board for direct surface decoration or gypsum finishes.
|
KS 980 :1990
|
Kenya Standard - Specification for gypsum plasters.
|
KS 1535-2:2000
|
Kenya Standard - Glass for use in building - Part 2: Specification for float glass.
|
KS 656-2:2006
|
Kenya Standard- Flush door leafs- Specification - Part 2: Cellular and semi-solid core tyre.
|
KS 1605:2001
|
Kenya Standard - Specification for hardwood poles, droppers, laths, guardrail post and spacer blocks.
|
KS 1608:2001
|
Kenya Standard - Specification for wooden fence posts.
|
KS 1249:1996
|
Kenya Standard- (Confirmed 2006) - Specification for fibre board hardboard.
|
KS 17: 1986
|
Kenya Standard - (Confirmed, 1999)- Specification for lawn timber.
|
KS 771:1988
|
Kenya Standard- (Confirmed 1999) - Specification for softwood timber grades for structural use.
|
KS 1062: 1991
|
Kenya Standard - Specification for infants outerwear garments.
|
KS 1113-1:1991
|
Kenya Standard- Specification for spun yarns - Part 1: Cotton yarns.
|
KS 113-4: 1991
|
Kenya Standard - Specification for staple spun yarns - Part 4:Polyester / Wool blended yarns.
|
KS 114-1:1993
|
Kenya Standard - Specification for textured filament yarns- Part l: Polyester yarns.
|
KS 1118:1991
|
Kenya Standard- Specification for top and bottom aprons in the textile industry.
|
KS 1125-1: 1992
|
Kenya Standard - Specification for carpet backing fabrics- Part l: Jute fabrics.
|
KS 1127:1992
|
Kenya Standard - Specification for curtain tapes.
|
KS 1149: 1995
|
Kenya Standard- Specification for optical performance of high visibility garments and accessories for use on the highway.
|
KS 117-1:1979
|
Kenya Standard - Specification for blankets- Part 1 : Blankets made from natural or synthetic fibres.
|
KS 117-2:1987
|
Kenya Standard - Specification for blankets - Part 2: 1987 Blankets made from wool.
|
KS 117-6: 1990
|
Kenya Standard - Specification for blankets - Part 6: Non Woven blankets.
|
KS 1257-1:1993
|
Kenya Standard - Specification for umbrella fabrics - Part l: Cotton fabrics.
|
KS 1257-2:1993
|
Kenya Standard - Specification for umbrella fabrics- Part 2: man-made fibre fabrics.
|
KS 1257-3: 1993
|
Kenya Standard- Specification for umbrella fabrics - Part 3: Silk.
|
KS 1434: 1999
|
Kenya Standard - Specification for coated tarpaulin fabric.
|
KS 1435:1999
|
Kenya Standard- Specification for coated fabrics for shoes.
|
KS 214-1:1981
|
Kenya Standard - (Confirmed, 1999) - Specification for woven interlinings- Part 1: Woven interlinings for shirts.
|
KS 214-2: 1985
|
Kenya Standard - (Confirmed, 1999) - Specification for woven interlinings -Part 2: Woven lining for apparel fabrics.
|
KS 214-3: 1981
|
Kenya Standard- (Confirmed, 1999) - Specification for woven interlinings - Part 3: Woven lining fabrics for men's and boys apparel.
|
KS 419:1983
|
Kenya Standard- Specification for knitted cotton fabric.
|
KS 505: 1984
|
Kenya Standard- Specification for women and girl outerwear garments.
|
KS 520:1984
|
Kenya Standard - Specification for woven fabrics used for suits, jackets, slacks, trousers and skirts.
|
KS 528: 1993
|
Kenya Standard- Specification for flat cotton wicks (Second Edition).
|
KS 539:1985
|
Kenya Standard - Specification for men's and boy's woven pyjama fabric.
|
KS 559-2: 1985
|
Kenya Standard - (Confirmed, 1999) -Specification for men's and boys' trousers –Part 2 Measurements for trousers.
|
KS 560-1: 1984
|
Kenya Standard- Specification for boy’s and mens' jackets and coats- Part 1: Making-up requirements for unlined jackets and coats.
|
KS 585: 1998
|
Kenya Standard- Specification for zippers (Second Edition).
|
KS586-1:1985
|
Kenya Standard - Specification for webbings - Part l: Cotton webbing.
|
KS 598: 1986
|
Kenya Standard- Specification for ladies cardigans.
|
KS 607-1 TO 5: 1985
|
Kenya Standard - Specification for standard adjacent fabrics.
|
KS 607-7: 1990
|
Kenya Standard- Specification for standard adjacent fabrics-Part 7 : Triacetate.
|
KS 628: 1986
|
Kenya Standard- Specification for elastic webbing.
|
KS 640-1: 1986
|
Kenya Standard - (Confirmed, 1999) - Specification for men's and boys' pyjamas- Part l: Making up requirements for pyjamas.
|
KS 640-2: 1986
|
Kenya Standard- (Confirmed, 1999) - Specification for men's and boys' pyjamas - Part 2: Measurements for pyjamas.
|
KS 665: 1998
|
Kenya Standard - Specification for textile labels (Second Edition).
|
KS 1113-3:1993
|
Kenya Standard - (Confirmed 2005) - Specification for spun) yarns - Part 3: Polyester/Cellulosic blended yarns.
|
KS 1114-2 : 1993
|
Kenya Standard - (Confirmed 2005) - Specification for textured filament yarns – Part 2: Polyamide yarns.
|
KS 1126-1:1993
|
Kenya Standard - (Confirmed 2005) - Kenya Standard for neckties- Part 1: Neckties made from woven fabrics.
|
KS 1128: 1995
|
Kenya Standard - (Confirmed 2005) - Specification for wicks for non-pressure stoves.
|
KS 114:1993
|
Kenya Standard- (Confirmed 2005) - Specification for cotton bedsheets (Third Edition).
|
KS 1142:1992
|
Kenya Standard - (Confirmed 2005) - Specification for polyolefin agricultural twines.
|
KS 1143:1993
|
Kenya Standard - (Confirmed 2005) - Specification for three strand polyester multifilament ropes.
|
KS 1144:1993
|
Kenya Standard - (Confirmed 2005) - Specification for three strand polyamide multifilament ropes.
|
KS 1146:1992
|
Kenya Standard - (Confirmed 2005) - Specification for woven polyolefin sacks for packing fertilizers.
|
KS 1148-2:1995
|
Kenya Standard - (Confirmed 2005) - Specification for fabrics for water resistant clothing - Part2: PVC coated fabrics.
|
KS 116: 1993
|
Kenya Standard- (Confirmed 2005) - Specification for cotton drills.
|
KS 1305-l:2005
|
Kenya Standard- Mosquito netting - SpecificationPart 1: Round mesh cotton netting (First Edition).
|
KS 1305-2:2005
|
Kenya Standard- Mosquito netting - Specification - Part 2: Synthetic fibre netting (First Edition).
|
KS 1393-1:2000
|
Kenya Standard - Specification for bales- Part 1: Dimensions and density of cotton bales.
|
KS 1393-2:2000
|
Kenya Standard - Specification for bales - Part 2 : Dimensions of bales of man-made fibres.
|
KS 1401:2005
|
Kenya Standard - Specification for ladies slips - Part 1: Half slips.
|
KS 1465:2005
|
Kenya Standard - Children's anoraks - Specification.
|
KS 1466:2006
|
Kenya Standard- Donkey jackets - Specification.
|
KS 1469:2005
|
Kenya Standard - Specification for work wear and career wear.
|
KS 1488:2005
|
Kenya Standard- Life jackets - Specification.
|
KS 1532-1: 1999
|
Kenya Standard- (Confirmed 2005) - Code of practice for inspection and acceptance criteria for used textile products (Mitumba) - Part 1: Garments.
|
KS 1739-l:2005
|
Kenya Standard- Specification for mosquito nets - Part 1: Untreated nets.
|
KS 1843:2005
|
Kenya Standard- Carpet underlays - Specification.
|
KS 1949:2005
|
Kenya Standard - Specification for brassieres.
|
KS 262: 1981
|
Kenya Standard - (Confirmed 2006) - Specification for standard wool adjacent fabric.
|
KS 364:2006
|
Kenya Standard - Woven cellulosic fibre apparel fabrics-Specification (Second Edition).
|
KS 365:2006
|
Kenya Standard- Woven man-made fibres apparel fabric-specification.
|
KS 366:2006
|
Kenya Standard - Woven polyester/ cellulosic blended apparel fabric - Specification (Second Edition).
|
KS 367:2003
|
Kenya Standard - Specification for cotton canvas (Third Edition).
|
KS 411:2001
|
Kenya Standard- Specification for size designation for women's and girl's clothing (Second Edition).
|
KS 412:2002
|
Kenya Standard- Specification for size designation for men's and boys' ready to wear clothing (Second Edition).
|
KS 414-1: 1982
|
Kenya Standard- (Confirmed 2005) - Specification or school wear for boys and girls - Part l: Requirements for making school wear.
|
KS 417: 1983
|
Kenya Standard - (Confirmed 2005) -Specification for knitted polyester cellulosic blended fabric (Second Edition).
|
KS 479-1:1992
|
Kenya Standard-(Confirmed 2005) - Specification for sewing threads- Part 1: Cotton sewing threads (Second Edition).
|
KS 479-2:1992
|
Kenya Standard - (Confirmed 2005) - Specification for sewing threads- Part 2: Sewing threads made wholly or partly from synthetic fibres (Second Edition).
|
KS 481:2000
|
Kenya Standard - Specification for woven bags (natural fibres) for seeds (Second Edition).
|
KS 493: 1983
|
Kenya Standard - (Confirmed 2006) - Specification for knitted nylon fabric.
|
KS 494: 1983
|
Kenya Standard - (Confirmed 2006) - Specification for knitted vests.
|
KS 495: 1983
|
Kenya Standard - (Confirmed 2006) - Specification for gent's knitted briefs.
|
KS 504-1: 1983
|
Kenya Standard- (Confirmed 2005) - Specification for men's and boys shirts - Part 1: Making up requirements.
|
KS 504-2: 1985
|
Kenya Standard - Specification for men's and boys shirts-Part 2: Measurements for shirts.
|
KS 525: 1984
|
Kenya Standard- (Confirmed 2006) -Specification for ladies knitted briefs.
|
KS 529:1984
|
Kenya Standard - (Confirmed 2005)- Specification for elastic flat braid.
|
KS 540: 1985
|
Kenya Standard - (Confirmed 2006)- Specification for pillow cases.
|
KS 542-2: 1990
|
Kenya Standard- (Confirmed 2006)- Specification for the national flag of Kenya –Part 2: Wool/Synthetic blends.
|
KS 543-1:2000
|
Kenya Standard- Specification for cotton embroidery threads-Part l: Cotton embroidery threads(Second Edition).
|
KS 558-1: 1984
|
Kenya Standard- (Confirmed 2005) --Specification for men's and boy's trouser- Part l: Making - up requirements.
|
KS 586-2:1988
|
Kenya Standard- (Confirmed 2006) -Specification for webbings- Part 2: Webbings made wholly or partly from synthetic fibres.
|
KS 599:2003
|
Kenya Standard - Specification for laces for footwear (Second Edition).
|
KS 606: 1993
|
Kenya Standard - (Confirmed 2006) - Specification for bedsheets made from blended polyester/cellulosic fabric or polyester and cellulosic combination fabric.
|
KS 607-6:1990
|
Kenya Standard - (Confirmed 2005) - Specification for standard adjacent fabrics - Part 6: Secondary acetate.
|
KS 607 -8: 1990
|
Kenya Standard - (Confirmed 2005)- Specification for standard fabrics - Part 8: Cotton.
|
KS 687-1: 1987
|
Kenya Standard- (Confirmed 2006) - Specification for men's uniforms- Part l: uniform trousers.
|
KS 687-2:1987
|
Kenya Standard- (Confirmed 2005) - Specification for men's uniforms- Part 2 : Uniform coats.
|
KS 687-3: 1998
|
Kenya Standard - (Confirmed 2005)- Specification for uniforms - Part 3: Uniform shirts.
|
KS 747-1: 1987
|
Kenya Standard- (Confirmed 2005) - Preservative treatments for textiles - Part 1: Specification for treatments.
|
KS 748-l: 1988
|
Kenya Standard - (Confirmed 2005) - Specification for coffee drying cloth - Part 1: Sisal cloth.
|
KS 779-1: 1988
|
Kenya Standard- (Confirmed 2005) - Specification for carpets - Part 1: Tufted carpets.
|
KS 779-2:1990
|
Kenya Standard - (Confirmed 2005) - Specification for carpets-Part 2: Sisal carpets.
|
KS 779-3:2003
|
Kenya Standard - Carpets -Specification Part 3: Woven carpets.
|
KS 893-2: 1994
|
Kenya Standard- (Confirmed 2005) Specification for upholstery –Part 2: Coat fabrics.
|
KS 364:2006
|
Kenya Standard- Woven cellulosic fibre apparel fabric- Specification (Second Edition).
|
KS 365:2006
|
Kenya Standard - Woven man-made fibres apparel fabric Specification.
|
KS 366:2006
|
Kenya Standard - Woven polyester/cellulosic blended apparel fabric - Specification (Second Edition).
|
KS 367:2003
|
Kenya Standard - Specification for cotton canvas (Third Edition).
|
KS 214-1: 1981
|
Kenya Standard - (Confirmed, 1999) - Specification for woven interlinings - Part 1: Woven interlinings for shirts.
|
KS 214-2: 1985
|
Kenya Standard - (Confirmed, 1999) - Specification for woven interlinings -Part 2: Woven lining for apparel fabrics.
|
KS 214-3: 1981
|
Kenya Standard- (Confirmed, l999) - Specification for woven interlinings- Part 3: Woven lining fabrics for men's and boys' apparel.
|
KS 1056-l:1990
|
Kenya Standard - (Confirmed 2005)- Specification for woven wrapping cloth- Part 1: Polypropylene cloth.
|
KS 539: 1985
|
Kenya Standard - Specification for men's and boys' woven pajama fabric.
|
KS 542-1: 1990
|
Kenya Standard - Specification for the national flag of Kenya- Part 1: Cotton, man-made fibres and blends.
|
KS 540: 1985
|
Kenya Standard - (Confirmed 2006) - Specification for pillow cases.
|
KS 606: 1993
|
Kenya Standard- (Confirmed 2006) - Specification for bed sheets made from blended polyester/cellulosic fabric or polyester and cellulosic combination fabric.
|
KS 506: 1994
|
Kenya Standard- (Confirmed 2006) – Specification for cotton dish cloths (First Revision).
|
KS 507:2005
|
Kenya Standard - Sanitary towels - Specification (Fourth Edition).
|
KS 506 : 1994
|
Kenya Standard- (Confirmed 2006) – Specification for cotton dish cloths (First Revision).
|
KS 507: 2005
|
Kenya Standard- Sanitary towels - Specification (Fourth Edition).
|
KS 1221 :1995
|
Kenya Standard - (Confirmed 2006)- Specification for crepe bandages.
|
KS 460-2:1983
|
Kenya Standard - Specification for aluminium plate and sheet - Part 2 : Uncoated aluminium plate, sheet and strip for hollow - ware cooking utensils.
|
KS 2:2003
|
Kenya Standard-Specification for galvanized plain and corrugated steel sheets (Fourth Edition).
|
KS 355: 1982
|
Kenya Standard - Specification for hot dip galvanized coating on iron and steel articles.
|
KS 4: 1987
|
Kenya Standard – Specification for hot rolled steel sheets for the manufacture of low pressure gas cylinders.
|
KS 452: 1998
|
Kenya Standard-Specification for stainless steel sinks for domestic purposes (Second Edition).
|
KS 462: 1992
|
Kenya Standard- Specification for steel filing cabinets for general purposes.
|
KS 72-1:2001
|
Kenya Standard - Steel nails - Specification - Part 1: Mild steel nails (Fourth Edition).
|
KS 395: 2006
|
Kenya Standard- Rubber automobile radiator hoses- Specification (Second Edition).
|
KS 294: 1986
|
Kenya Standard - Specification for air filters for internal combustion engines.
|
KS 251:1982
|
Kenya Standard - Specification for motor vehicle radiators.
|
KS 758: 1987
|
Kenya Standard - Specification for narrow V- belts for motor
|
KS 1264: 1994
|
Kenya Standard - Specification for shuttles - Part 1: Shuttles for automatic pin-changing looms.
|
KS 756: 1989
|
Kenya Standard - Specification for speedometer cables for automobiles.
|
KS 1350: 1998
|
Kenya Standard - Specification for tow - rope assemblies for towing passenger cars and light vans.
|
KS 1272: 1996
|
Kenya Standard - Specification for vehicle jacks.
|
KS 895: 1989
|
Kenya Standard Specification for bicycles – safety requirements.
|
KS 906: 1989
|
Kenya Standard - Specification for motor cycles- symbols for control indicators and telltales.
|
KS 992:2005
|
Kenya Standard - Manually operated chaff cutter Specification (Second Edition) Small Tools.
|
KS 356-2007
|
Kenya Standard - Mild steel pad bolts – Specification (Third Edition).
|
KS 151:2006
|
Kenya Standard - Panga - Specification (Third Edition).
|
KS 295: 1982
|
Kenya Standard- Specification for axes and hatchets.
|
KS 154:2000
|
Kenya Standard - Specification for both plain and fork hoes(Third Edition).
|
KS 354-l: 1982
|
Kenya Standard - Specification for countersunk head wood screws- Part 1: Metric series.
|
KS 886-3: 1989
|
Kenya Standard - Specification for dimensions across flats and mechanical properties of fasteners - Part 3: Tolerance system for threaded fasteners.
|
KS 886-1: 1989
|
Kenya Standard- Specification for dimensions of widths across flats and mechanical properties of fasteners - Part l: Dimensions of width across flats.
|
KS 1084-4: 1990
|
Kenya Standard - Specification for glass and reference electrodes for the measurement of pH.
|
KS 1086: 1992
|
Kenya Standard - Specification for hacksaw blades.
|
KS 991: 1996
|
Kenya Standard - Specification for Hammer (Posho ) Mills.
|
KS 1339: 1998
|
Kenya Standard - Specification for hand hammers.
|
KS 219: 1981
|
Kenya Standard - Specification for hexagonal and square bolts, screws, nuts and locknuts (Metric and inch threads).
|
KS 883: 1994
|
Kenya Standard - Specification for hook bolts.
|
KS 759: 1987
|
Kenya Standard - Specification for hose clips.
|
KS 1347:1997
|
Kenya Standard -Specification for metric steel ,tape measures(winding types).
|
KS 626:1987
|
Kenya Standard-Specification for open jawed spanners for hexagon sizes.
|
KS 537:1987
|
Kenya Standard-Specification for paper and garment pins.
|
KS 1348:1998
|
Kenya Standard-Specification for parallel action flat nose pliers.
|
KS 1429:1999
|
Kenya Standard-Specification for pliers, pincers and nippers, technical supply conditions.
|
KS 204-1:1992
|
Kenya Standard-Specification for shovels - Part 1: Mild steel Shovels.
|
KS 204-2:1992
|
Kenya Standard-Specification for shovels - Part 2: Medium steel shovels.
|
KS 1083:1990
|
Kenya Standard-Specification for spirit level vials.
|
KS 357:1990
|
Kenya Standard-Specification for tower bolts.
|
KS 886-2:1989
|
Kenya Standard-Specification for width across flats and mechanical properties of fasteners – Part 2: Mechanical properties of fasteners.
|
KS ISO 2726:1998
|
Kenya Standard-Woodworking tools - Metal- bodied bench planes, plane cutters and cap irons.
|
KS 1337:1996
|
Kenya Standard-Specification for continuous (piano) hinges.
|
KS 218-1:1980
|
Kenya Standard-Specification for general purpose hinges –Part l: Steel hinges.
|
KS 1540:1999
|
Kenya Standard-Specification for knapsack sprayers.
|
KS 490:1985
|
Kenya Standard-Specification for discs for agricultural tractors. Tractors and Machinery for Agriculture and Forestry.
|
ISO 9635-1
|
Kenya Standard-Agricultural irrigation equipment – Irrigation valves - Part 1: General requirements.
|
KS ISO 9635-2
|
Kenya Standard-Agricultural irrigation equipment – Irrigation valves - Part2t Isolating valves.
|
KS ISO 9635-3
|
Kenya Standard-Agricultural irrigation equipment – Irrigation valves - Part 3: Check valves.
|
KS ISO 9635-4
|
Kenya Standard-Agricultural irrigation equipment – Irrigation valves - Part 4: Air valves.
|
KS ISO 9635-5
|
Kenya Standard-Agricultural irrigation equipment – Irrigation valves - Part 5: Control valves.
|
KS 1498
|
Kenya Standard-Specification for rollers and shafts for sugarcane crushers.
|
KS ISO 20826:2006
|
Kenya Standard- Automotive LPG components- containers.
|
KS ISO 16528-1
|
Kenya Standard-Boilers and pressure vessels - Part 1: Performance requirements.
|
KS ISO 6406
|
Kenya Standard-Gas cylinders - Seamless steel gas cylinders -Periodic inspection and testing.
|
KS ISO 14520-1
|
Kenya Standard - Gaseous fire-extinguishing systems -Physical properties and system design - Part 1: General requirements.
|
KS ISO I I29
|
Kenya Standard - Steel tubes for boilers, superheaters and heat exchangers - Dimensions, tolerantes and conventional masses per unit length.
|
KS 200-1:2002
|
Kenya Standard - Specification for storage tanks for petroleum industry - Part l: Carbon steel welded horizontal cylindrical storage tanks (Second Edition).
|
KS 823:1993
|
Kenya Standard - Specification for V-belts for industrial machines.
|
KS ISO 16135:2006
|
Kenya Standard -Industrial valves - Ball valves of thermoplastics materials. Plastic.
|
KS ISO 16136:2006
|
Kenya Standard - Industrial valves - Butterfly valves of thermoplastics materials.
|
KS ISO 16137:2006
|
Kenya Standard- Industrial valves - Check valves of thermoplastics materials.
|
KS ISO 16138:2006
|
Kenya Standard - Industrial valves - Diaphragm valves of thermoplastics materials.
|
KS ISO 265-1:1988
|
Kenya Standard - Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions: Metric series -Part 1: Unplasticized poly(vinyl chloride) (PVC-U).
|
KS ISO 15874-1:2003
|
Kenya Standard - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General.
|
KS ISO 15874-2:2003
|
Kenya Standard - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes.
|
KS ISO 15874-3:2003
|
Kenya Standard - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings.
|
KS ISO 15874-5:2003
|
Kenya Standard - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system.
|
KS ISO 3633:2002
|
Kenya Standard - Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Unplasticized poly(vinylchloride) (PVC-U).
|
KS 492:1985
|
Kenya Standard - Specification for general purpose agricultural spray hose.
|
KS 324:1982
|
Kenya Standard - Specification for high pressure rubber water Hoses.
|
KS 487:1987
|
Kenya Standard - Specification for hose couplings for petrol, diesel and paraffin.
|
KS 292-1:2003
|
Kenya Standard - Specification for joints and fittings for use with unplasticized PVC pressure pipes - Part l: Injectio/r moulded unplasticized PVC fittings for solvent welding (Second Edition).
|
KS 292-2:2003
|
Kenya Standard - Specification for joints and fittings for use with unplasticized PVC pressure pipes - Part 2i Fabricated unplasticized PVC fittings and mechanical joints made principally from unplasticized pipes for solvent welding(Second Edition).
|
KS 321:1982
|
Kenya Standard - Specification for low pressure rubber water Hoses.
|
KS 149-1:2000
|
Kenya Standard - Specification for pipes and fittings made of unplasticized poly vinyl chloride (U-PVC) for water supply - Part 1: General requirements (Third Edition).
|
KS 149-2:2000
|
Kenya Standard - Specification for pipes and fittings made of unplasticized poly vinyl chloride (U-PVC) for water supply - Part 2: Dimensions, nominal outside diameters, wall thickness and nominal pressures - Metric S.
|
KS 486:1985
|
Kenya Standard - Specification for rubber hose for final delivery.
|
KS 485:1985
|
Kenya Standard - Specification for rubber hose for liquefied petroleum gases.
|
KS 701:1996
|
Kenya Standard - Specification for tyre valves.
|
KS ISO 6224:2005
|
Kenya Standard - Thermoplastics hoses, textile- reinforced, for general-purpose water applications - Specification.
|
KS ISO 11922-l:1997
|
Kenya Standard - Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series.
|
KS 2175:2009
|
Kenya Standard - Firefighting equipment- Components of underground and above ground hydrant systems - Specification.
|
KS ISO 11602-1:2000
|
Kenya Standard - Fire protection - portable and wheeled fire extinguishers- Part l: Selection and installation.
|
KS ISO 11602-2:2000
|
Kenya Standard - Fire protection - Portable and wheeled fire extinguishers - P art 2: Inspection and maintenance.
|
KS 963:1990
|
Kenya Standard - Specification for industrial safety helmets.
|
KS 1020-1:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 1: Definitions and Determination methods for dimensions and capacities and open-top cans.
|
KS 1020-2:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 2: Capacities and related cross section for open top cans for general foods.
|
KS 1020-3:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 3: Capacities and related cross section for cans for meat and meat products.
|
KS 1020-4:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 4: Capacities and related cross sections for open top cans for drinks.
|
KS 1020-5:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 5: Capacities and related cross sections for open top cans for edible oil.
|
KS 1020-6:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 6: Capacities and related cross section for open top cans for fish and fish products.
|
KS 1020-7:1993
|
Kenya Standard - Specification for light gauge metal containers - Part l: Capacities and related cross sections for open top cans for milk.
|
KS 1020-8:1993
|
Kenya Standard - Specification for light gauge metal containers - Part 8: Internal diameters for round open -top cans.
|
KS 757:1987
|
Kenya Standard - Specification for metal aerosol container. Containers and Tanks KS 536:1985 Specification for milk cans.
|
KS 896:1990
|
Kenya Standard - Specification for periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers).
|
KS 1318:1997
|
Kenya Standard - Specification for portable poultry feeders.
|
KS 840:1987
|
Kenya Standard - Specification for transportable acetylene Containers.
|
KS 1324:1997
|
Kenya Standard - Specification for watering cans.
|
THE STANDARDS (VERIFICATION OF CONFORMITY TO STANDARDS AND OTHER APPLICABLE REGULATIONS) ORDER
ARRANGEMENT OF PARAGRAPHS
PART I – PRELIMINARY
5. |
Compliance with standards
|
6. |
Appointment of inspection bodies
|
7. |
Verification of conformity
|
8. |
Certificate of conformity and non- conformity report
|
9. |
Destination inspection
|
11. |
Revocation of L.N 183/2019
|
SCHEDULES
SCHEDULE [r. 4] — |
CRITERIA FOR EXEMPTION OF SPECIFIC PRODUCTS FROM PRE-SHIPMENT VERIFICATION OF CONFORMITY REQUIREMENTS
|
THE STANDARDS (VERIFICATION OF CONFORMITY TO STANDARDS AND OTHER APPLICABLE REGULATIONS) ORDER
PART I – PRELIMINARY
1. |
Citation
This Order may be cited as the Standards (Verification of Conformity to Standards and Other Applicable Regulations) Order.
|
2. |
Interpretation
In this Order, unless the context otherwise requires—
"approved warehouse” means a premise approved by the Bureau for storage of goods other than a designated customs area;
"Bureau" means the Kenya Bureau of Standards established by section 3 of the Act; and
"Council" means the National Standards Council established by section 6 of the Act.
[L.N. 212/2020, r. 2.]
|
3. |
Application
This Order shall apply to all products imported into Kenya.
|
4. |
Exempted products
(1) |
Notwithstanding any other provision of this Order, the products specified in the first column of the Schedule shall be exempted from the provisions of this Order:
Provided that a person importing any exempted product specified in the Schedule shall provide the documents specified in the second column of the Schedule with respect to the exempted product.
|
(2) |
The products specified in the Schedule may be inspected on arrival at a port of entry.
|
|
5. |
Compliance with standards
(1) |
An importer of products shall ensure that the imported products meet Kenya standards, approved specifications and other applicable regulations.
|
(2) |
An importer of products shall notify the Bureau in the prescribed form before importing any product into Kenya and provide proof that the imported product meets Kenya standards, approved specifications and other applicable regulations.
|
|
6. |
Appointment of inspection bodies
(1) |
The Bureau may appoint an inspection body in the country of exportation of products, or in a transhipment port, or in a port of entry, to undertake verification of conformity to Kenya standards, approved specifications and other applicable regulations.
|
(2) |
The Bureau may recognise a national standards body of an exporting country that performs inspection functions as an inspection body for the purposes of pre-shipment verification of conformity.
|
|
7. |
Verification of conformity
(1) |
Any product which is the subject of this Order may be subjected to verification of conformity to Kenya standards, approved specifications and other applicable regulations in the exporting country or transhipment port by the inspection body appointed under paragraph 6.
|
(2) |
Notwithstanding the provisions of subparagraph (1), the Bureau may reinspect the imported product at a port of entry if, in the Bureau’s opinion, it is necessary to do so.
|
(3) |
For avoidance of doubt, where there is a conflict between the provisions of subparagraphs (1) and (2), the provisions of subparagraph (2) shall prevail.
[L.N. 212/2020, r. 3.]
|
|
8. |
Certificate of conformity and non- conformity report
(1) |
The Bureau or an inspection body appointed under paragraph 6 shall issue a certificate of conformity, certificate of inspection or certificate of roadworthiness in respect of a product that conforms to Kenya standards, approved specifications and other applicable regulations.
|
(2) |
The Bureau or an inspection body appointed under paragraph 6 shall issue a non-conformity report in respect of a product that does not conform to Kenya standards, approved specifications and other applicable regulations.
|
(3) |
A product that does not conform to Kenya standards, approved specifications and other applicable regulations shall not be permitted to be imported into Kenya and shall be re-exported to the exporting country or destroyed at the importer’s expense.
|
|
9. |
Destination inspection
(1) |
A product which is the subject of this Order which arrives at a port of entry without a certificate of conformity, certificate of inspection or certificate of roadworthiness shall be subjected to destination inspection at a fee equal to five per cent of the approved customs value of the product.
|
(2) |
The importer of a product which is the subject of this Order which arrives at a port of entry without a certificate of conformity, certificate of inspection or certificate of roadworthiness and which is kept in an approved warehouse pursuant to subparagraph (3) shall, in addition to the fee specified in subparagraph (1), execute a security bond in favour of the Bureau equal to five per cent of the approved customs value of the product.
|
(3) |
A product which is the subject of this Order which arrives at a port of entry without a certificate of conformity, certificate of inspection or certificate of roadworthiness shall be held at the port of entry or kept in an approved warehouse for the purposes of inspection and testing.
|
(4) |
A product which is the subject of this Order which arrives at a port of entry without a certificate of conformity, certificate of inspection or certificate of roadworthiness from an exporting country where the Bureau has not appointed an inspection body shall be subjected to destination inspection at the importer’s expense at the rate that would be applicable if inspection had been undertaken in the exporting country by an inspection body appointed by the Bureau.
|
(5) |
A product imported by a consolidator registered pursuant to section 14C of the Act which is the subject of this Order which arrives at a port of entry without a certificate of conformity or certificate of inspection shall be subjected to destination inspection at a fee equal to zero point six (0.6%) per cent of the approved customs value of the product.
|
(6) |
Notwithstanding the provision of subparagraph (1), a product registered by KEBS on the basis of a valid certification recognized by KEBS shall be subjected to destination inspection at the importer’s expense at the rate that would be applicable if inspection had been undertaken in the exporting country by an inspection body appointed by the Bureau:
Provided that such registration is obtained before importation.
[L.N. 212/2020, r. 4.]
|
|
10. |
Exemption from Order
The Cabinet Secretary may, on the advice of the Council, exempt any product from the provisions of this Order if the Cabinet Secretary is satisfied that it is in the national interest to do so.
|
11. |
Revocation of L.N 183/2019
The Standards (Verification of Conformity to Kenya Standards and Other Applicable Regulations) Regulations, 2019, are revoked.
|
SCHEDULE [r. 4]
CRITERIA FOR EXEMPTION OF SPECIFIC PRODUCTS FROM PRE-SHIPMENT VERIFICATION OF CONFORMITY REQUIREMENTS
No.
|
CATEGORY
|
REQUIRED DOCUMENTS
|
1.
|
Industrial raw materials excluding materials specified by the Council, completely knocked down kits for road vehicles, machinery and industrial spares imported by registered manufacturers for own use
|
(a) Certificate of registration of the manufacturer or assembler issued by the Bureau or any other regulatory agency responsible for regulating manufactured products
|
(b) Certificate of analysis or material safety datasheet for raw materials
|
2.
|
Equipment and original equipment manufacturers (OEM) parts for licensed power generation companies
|
Evidence of original equipment manufacturer warranty
|
3.
|
Original equipment medical manufacturer’s parts for medical equipment
|
(a) Evidence of original equipment manufacturer for spare parts
|
(b) Evidence of manufacturer’s warranty
|
4.
|
Products imported by diplomats and diplomatic missions except motor vehicles
|
Form PRO 1A or PRO 1B issued by the Ministry of Foreign Affairs
|
5.
|
Courier parcels with a value specified by the Council and direct assessment items approved by the Kenya Revenue Authority
|
(a) Parcel handler’s license issued by the Communications Authority of Kenya
|
(b) Direct assessment documents approved by the Kenya Revenue Authority
|
6.
|
Products certified by the Bureau under the Diamond Mark Scheme
|
Valid Diamond Mark Permit issued by the Bureau
|
7.
|
Products manufactured within the East African Community
|
(a) Certificate of origin
|
(b) Product Certification Permit or Certificate of Analysis (Raw Materials) or Test Report issued by the respective National Standards Body of the Country of Origin
|
8.
|
Used personal effects belonging to returning residents and arriving expatriates excluding road vehicles
|
Approval by the Kenya Revenue Authority
|
9.
|
General consumables (stores) imported by international carriers for in-flight orships services and duty- free products
|
(a) Proof of licensing as an international carrier
|
(b) Authority by Kenya Revenue Authority to operate as duty-free
|
10.
|
Re-imports
|
Re-importation certificate issued by the Kenya Revenue Authority
|
11.
|
Temporary imports
|
(a) Proof of bond execution with Kenya Revenue Authority
|
(b) Carnet certificate (for road vehicles)
|
12.
|
New road vehicles and new mobile equipment
|
Manufacturer’s warranty or type approval
|
13.
|
Printed matter and recorded digital media
|
Declaration that the material has not violated any intellectual property rights
|
14.
|
The following products regulated under specific laws:(1) explosives, arms and ammunition(2) plants, seeds and planting materials(3) live animals, carcasses and hatching eggs(4) tissues and organs(5) human and veterinary pharmaceutical products(6) pesticides(7) aircraft and aircraft parts(8) marinecraft and marinecraft parts(9) radioactive materials and isotopes
|
Proof of compliance with the relevant Regulations
|
15.
|
New motor vehicle parts imported from the manufacturer of the vehicle to which the parts are to be fitted or their authorized representative.
|
(a) Evidence that the exporter is the original vehicle manufacturer or evidence of authorization by the vehicle manufacturer in the case of authorized representative.(b) Manufacturer’s warranty of the parts.(c) Evidence of registration by KEBS as importers of those parts.(d) Evidence of conformity of the parts with applicable standards.
|
ARRANGEMENT OF PARAGRAPHS
2. |
Declaration of Kenya Standards
|
SCHEDULES
1. |
Citation
This Order may be cited as the Standards Order.
|
2. |
Declaration of Kenya Standards
The Kenya Standards, having been declared as set out in the first and second columns of the Schedule, no person shall manufacture or sell the commodities or use the methods and procedure on or after forty-two days after the date of this Order unless the commodities, methods or procedures comply with the requirements of the relevant Kenya Standard.
|
SCHEDULE
Number
|
Title of Specification or Code of Practice
|
KS 1515:2019
|
Kenya Standard – Road vehicles – Inspection of road vehicles – Code of Practice, Second Edition
|
KS 1814:2019
|
Kenya Standard – Biomass stoves – Performance requirements, Fourth Edition
|
KS ISO 6469-1:2019
|
Kenya Standard – Electrically propelled road vehicles – Safety specifications Part 1: Rechargeable energy storage system (RESS), Second Edition
|
KS ISO 6469-3:2018
|
Kenya Standard – Electrically propelled road vehicles – Safety specifications Part 3: Electrical safety, Second Edition
|
KS ISO 20766-1:2018
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 1: General requirements and definitions, First Edition
|
KS ISO 20766-2:2018
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 2: Performance and general test methods, First Edition
|
KS ISO 20766-3:2018
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 3: 80% stop valve, First Edition
|
KS ISO 20766-4:2018
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 4: Level indicator, First Edition
|
KS ISO 20766-6:2019
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 6: Pressure relief valves (PRV), First Edition
|
KS ISO 20766-9:2019
|
Kenya Standard – Road vehicles – Liquefied petroleum gas (LPG) fuel systems components Part 9: Pressure Relief Device (PRD), First Edition
|
KS ISO 16232:2018
|
Kenya Standard – Road vehicles – Cleanliness of components and systems, First Edition
|
KS EAS 924-1:2018
|
Kenya Standard – Handling, storage and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial and industrial installations – Code of practice Part 1: Storage and filling sites for refillable LPG containers of capacity not exceeding 150 litres, First Edition
|
KS EAS 924-2:2018
|
Kenya Standard – Handling, storage and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial and industrial installations – Code of practice Part 2: LPG installations involving gas storage vessels of individual water capacity exceeding 150 litres and combined water capacity not exceeding 9,000 litres per installation, First Edition
|
KS EAS 925:2018
|
Kenya Standard – Inspection and testing of Liquefied Petroleum Gas (LPG) road tankers, First Edition
|
KS EAS 902:2018
|
Kenya Standard – Bulk Liquefied petroleum Gas (LPG) road tankers – Assembling – Requirements, First Edition
|
KS 28-1:2019
|
Kenya Standard – Cheese – Specification Part 1: General requirements, Fourth Edition
|
KS 28-2:2019
|
Kenya Standard – Cheese – Specification Part 2: Cheddar, Fourth Edition
|
KS 28-3:2019
|
Kenya Standard – Cheese – Specification Part 3: Gouda, Fourth Edition
|
KS 2853:2019
|
Kenya Standard – Danbo cheese – Specification, First Edition
|
KS 2683:2019
|
Kenya Standard – Brie Cheese – Specification, Second Edition
|
KS 2682:2019
|
Kenya Standard – Camembert cheese – Specification, Second Edition
|
KS 28-4:2019
|
Kenya Standard – Cheese – Specification Part 4: Tilsiter, Fourth Edition
|
KS 2850:2019
|
Kenya Standard – Cheeses in brine – Specification, First Edition
|
KS 2510:2019
|
Kenya Standard – Evaporated milks – Specification, Second Edition
|
KS 2509:2019
|
Kenya Standard – Processed cheese – Specification, Second Edition
|
KS 2688:2019
|
Kenya Standard – Certain canned fruits – Specification, Second Edition
|
KS 2689:2019
|
Kenya Standard – Quick frozen vegetables, Second Edition
|
KS 2687:2019
|
Kenya Standard – Pickled fruits and vegetables – Specification, Second Edition
|
KS 1178:2019
|
Kenya Standard – Canned tropical fruit salad –Specification, Second Edition.
|
KS 2851:2019
|
Kenya Standard – Canned apple sauce – Specification, First Edition
|
KS 2852:2019
|
Kenya Standard – Canned stone fruits – Specification, First Edition
|
KS 2166:2019
|
Kenya Standard – Icing sugar – Specification, Second Edition
|
KS 436-2:2019
|
Kenya Standard – Coca powder – Specification Part 2: Cocoa-sugar mixtures, Fourth Edition
|
KS 998:2019
|
Kenya Standard – Chocolates – Specification, Second Edition
|
KS 2862:2019
|
Kenya Standard – Cocoa butter, Specification, First Edition
|
KS EAS 349:2004
|
Kenya Standard – Glucose syrup – Specification
|
KS 2617:2008
|
Kenya Standard – Molasses for industrial use – Specification
|
KS EAS 5:2009
|
Kenya Standard – Refined white sugar – Specification
|
KS EAS 749:2014
|
Kenya Standard – Brown sugars – Specification
|
KS 1792-2:2013
|
Kenya Standard – Malt-based cocoa products – Specification Part 1: Granulated products
|
KS ISO/TR 12591:2013
|
Kenya Standard – White tea – Specification
|
KS EAS 770:2012
|
Kenya Standard – Fortified sugar – Specification
|
KS 2859:2019
|
Kenya Standard – Sweet potato bread – Specification, First Edition
|
KS 2860:2019
|
Kenya Standard – Sweet potato puree – Specification, First Edition
|
KS EAS 762:2013
|
Kenya Standard – Dry soy beans – Specification
|
KS EAS 230:2001
|
Kenya Standard – Maize bran as livestock feed – Specification
|
KS 949:1999
|
Kenya Standard – Specification for rice bran
|
KS EAS 97:1999
|
Kenya Standard – Fishmeal – Specification
|
KS EAS 330:2002
|
Kenya Standard – Citrus fruit – Specification
|
KS EAS 332:2002
|
Kenya Standard – Fresh capsicums – Specification
|
KS EAS 47:2000
|
Kenya Standard – Fresh papaya – Specification
|
KS EAS 56:2000
|
Kenya Standard – Fresh mushrooms – Specification
|
KS EAS 286-1:2002
|
Kenya Standard – Cut flowers and cut foliage Part 1: Fresh cut flowers – Specification
|
KS 1047:1997
|
Kenya Standard – Specification for apples and pears
|
KS 1484:1999
|
Kenya Standard – Specification for asparagus
|
KS 2662:2016 and 1:2019
|
Kenya Standard – Disposable adult diapers – Specification Amendment 1, First Edition
|
KS 2881:2019
|
Kenya Standard – Maternity pads – Specification, First Edition
|
KS 1661:2019
|
Kenya Standard – Footwear – Canvas shoes – Specification, Second Edition
|
KS 2238:2019
|
Kenya Standard – Baby shawl – Specification, Second Edition
|
KS 559-1:2019
|
Kenya Standard – Men’s and boy’s trousers – Specification Part 1: Making up requirements, Third Edition
|
KS 1267-2:2019
|
Kenya Standard – Pillows for domestic use – Specification Part 2: Synthetic filled pillows, Third Edition
|
KS 640-1:2019
|
Kenya Standard – Men’s and boy’s pyjamas – Specification Part 1: Making up requirements, Second Edition
|
KS 640-2:2019
|
Kenya Standard – Men’s and boy’s pyjamas – Specification Part 2: Measurements, Second Edition
|
KS 629:2019
|
Kenya Standard – Sweaters – Specification, Fourth Edition
|
KS IEC 60514:1975
|
Kenya Standard – Acceptance inspection of class 2 alternating-current watt-hour meters
|
KS EAS 388-2:2005
|
Kenya Standard – High-voltage fuses Part 2: Expulsion fuses
|
KS 1187:1993
|
Kenya Standard – Specification for metallic clips for electrical wiring
|
KS 311-1:1987
|
Kenya Standard – Specification for miniature circuit breakers (MCBs)
|
KS IEC61643-1:2002
|
Kenya Standard – Surge protective devices connected to low-voltage power distribution systems Part 1: Performance requirements and testing methods
|
KS 1827:2007
|
Kenya Standard – Voltage characteristics of electricity supplied by public distribution systems
|
KS 311-1:1987
|
Kenya Standard – Specification for miniature circuit breakers (MCBs)
|
KS ISO 361:1975
|
Kenya Standard – Basic ionizing radiation symbol
|
KS ISO 14152:2001
|
Kenya Standard – Neutron radiation protection shielding – Design principles and considerations for the choice of appropriate materials
|
KS ISO 14146:2000
|
Kenya Standard – Radiation protection – Criteria and performance limits for the periodic evaluation of processors of personal dose meters for X and gamma radiation
|
KS ISO 8194:1987
|
Kenya Standard – Radiation protection – Clothing for protection against radioactive contamination – Design, selection, testing and use
|
KS OIML R 119:1996
|
Kenya Standard – Pipe provers for testing measuring systems for liquids other than water
|
KS 1950:2007
|
Kenya Standard – X-ray analysis equipment – Protection against ionizing radiation – Code of practice
|
KS 1988:2007
|
Kenya Standard – Safe use of radiation gauges – Code of practice
|
KS 1989:2006
|
Kenya Standard – Cabinet X-ray equipment for examination of letters, packages, baggage, freight and other articles for security, quality control and other purposes – Requirements
|
KS 1990:2007
|
Kenya Standard – Safe use of ionizing radiation in training institutions – Code of practice
|
KS 2032:2007
|
Kenya Standard – Near-surface disposal of radioactive waste – Code of practice
|
KS 2029:2007
|
Kenya Standard – Corpses containing radioactive materials – Safe handling – Code of Practice
|
KS 2030:2007
|
Kenya Standard – Discharge of patients undergoing treatment with radioactive substances – Code of practice
|
KS 1953:2007
|
Kenya Standard – Healthcare practitioners exposed to ionizing radiation – Code of practice
|
KS 1954:2007
|
Kenya Standard – Medical research – Administration of ionizing radiation to human subjects – Requirements
|
KS ISO 19105:2000
|
Kenya Standard – Geographic information – Conformance and testing
|
KS ISO 19106:2004
|
Kenya Standard – Geographic information – Profiles
|
KS ISO 19107:2003
|
Kenya Standard – Geographic information – Spatial schema
|
KS ISO 19108:2002
|
Kenya Standard – Geographical information – Temporal schema
|
KS 19112:2003
|
Kenya Standard – Geographical information – Spatial referencing by geographic identifiers
|
KS ISO 19116:2004
|
Kenya Standard – Geographic information – Positioning services
|
KS ISO/IEC 15457-1:2008
|
Kenya Standard – Information technology – Identification cards – Thin flexible cards Part 1: Physical characteristics
|
KS ISO/IEC 15457-2:2007
|
Kenya Standard – Information technology – Identification cards – Thin flexible cards Part 2: Magnetic recording technique
|
KS ISO/IEC 15457-3:2002
|
Kenya Standard – Information technology – Identification cards – Thin flexible cards Part 3: Test methods
|
KS ISO/IEC 15693-1:2010
|
Kenya Standard – Information technology – Identification cards – Contactless integrated circuit cards – Vicinity cards Part 1: Physical characteristics
|
KS ISO/IEC 15693-2:2006
|
Kenya Standard – Information technology – Identification cards – Contactless integrated circuit cards – Vicinity cards Part 2: Air interface and initialisation
|
KS ISO/IEC 15693-3:2009
|
Kenya Standard – Information technology – Identification cards – Contactless integrated circuit cards – Vicinity cards Part 3: Anti-collision and transmission protocol
|
KS ISO/IEC 19794-1:2006
|
Kenya Standard – Information technology – Biometric data Interchange Formats Part 1: Framework
|
KS ISO/IEC 19794-2:2005
|
Kenya Standard – Information technology – Biometric data Interchange Formats Part 2: Finger minutiae data
|
KS ISO/IEC 19794-3:2006
|
Kenya Standard – Information technology – Biometric data Interchange Formats Part 3: Finger pattern spectral data
|
KS ISO/IEC 11693-2:2009
|
Kenya Standard – Information technology – Identification cards, Optical memory cards Part 2: Co-existence of optical memory with other machine- readable technologies.
|
KS USO/IEC 11694-4:2008
|
Kenya Standard – Information technology – Identification cards, Optical memory cards – Linear recording method Part 4: Logical data structures
|
KS ISO/IEC 11695-3:2008
|
Kenya Standard – Information technology – Identification cards, Optical memory cards – Holographic recording method Part 3: Optical properties and characteristics
|
KS ISO/IEC 10373-1:2006
|
Kenya Standard – Identification cards – Test methods Part 1: General characteristics
|
KS ISO/IEC 10373-2:2006
|
Kenya Standard – Identification cards – Test methods Part 2: Cards with magnetic stripes
|
KS ISO/IEC 10373-3:2010
|
Kenya Standard – Identification cards – Test methods Part 3: Integrated circuit cards
|
KS ISO/IEC 10373-7:2008
|
Kenya Standard – Identification cards – Test methods Part 7: Vicinity cards
|
KS ISO/IEC 10373-8:2011
|
Kenya Standard – Identification cards – Test methods Part 8: USB-ICC
|
KS ISO/IEC 10373-9:2011
|
Kenya Standard – Identification cards – Test methods Part 9: Optical memory cards – Holographic recording method
|
KS ISO/IEC 19784-1:2006
|
Kenya Standard – Information technology – Biometric Application Programming Interface Part 1: BioAPI specification
|
KS ISO/IEC 19784-2:2007
|
Kenya Standard – Information technology – Biometric Application Programming Interface Part 2: Biometric archive function provider interface
|
KS ISO/IEC 19785-2:2006
|
Kenya Standard – Information technology – Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric Registration Authority
|
KS ISO/IEC 24708:2008
|
Kenya Standard – Information technology – Biometrics – BioAPI Interworking protocol
|
KS ISO/IEC 24713-1:2008
|
Biometric profiles for inter-operability and data interchange Part 1: Overview of biometric systems and biometric profiles
|
KS ISO/IEC 24713-2:2008
|
Kenya Standard – Biometric profiles for inter- operability and data interchange Part 2: Physical access control for employees at airports
|
KS ISO/IEC 19795-1:2006
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 1: Principles and framework
|
KS ISO/IEC 19795-2:2007
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 2: Testing methodologies for technology and scenario evaluation
|
KS ISO/IEC 19795-3:2007
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 3 – Modality- specific testing
|
KS ISO/IEC 19795-4:2008
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 4: Inter- operability performance testing
|
KS ISO/IEC 19795-5:2011
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 5: Access control scenario and grading scheme
|
KS ISO/IEC 19795-6:2012
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 6: Testing methodologies for operational evaluation
|
KS ISO/IEC 19795-7:2011
|
Kenya Standard – Information technology – Biometric performance testing and reporting Part 7: Testing of on- card biometric comparison algorithms
|
KS ISO/IEC 11770-1:2010
|
Kenya Standard – Information technology – Security techniques – Key management Part 1: Framework
|
KS ISO/IEC 19796-3:2009
|
Kenya Standard – Information technology – Learning, education and training – Quality management, assurance and metric Part 3: Reference methods
|
KS ISO 23988:2007
|
Kenya Standard – Information technology – A code of practice for the use of information technology (IT) in the delivery of assessments
|
KS ISO 14915-1:2002
|
Kenya Standard – Software ergonomics for multimedia user interfaces Part 1: Design principles and framework
|
KS ISO 9241-151:2008
|
Kenya Standard – Ergonomics of human-system interaction Part 151: Guidance on worldwide web user interfaces
|
KS ISO/IEC/TR 24704:2004
|
Kenya Standard – Information technology – Customer premises cabling for wireless access points
|
KS ISO 9241-171:2008
|
Kenya Standard – Ergonomics of human-system interaction Part 171: Guidance on software accessibility
|
KS ISO 9241-20:2008
|
Kenya Standard – Ergonomics of human-system interaction Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
|
KS 184-3:2012
|
Kenya Standard – Primary batteries – Specification Part 3: Watch batteries
|
KS 184-4:2012
|
Kenya Standard – Primary batteries – Specification Part 4: Safety of lithium batteries
|
KS 184-5:2012
|
Kenya Standard – Primary batteries – Specification Part 5: Safety of batteries with aqueous electrolyte
|
KS IEC 62560:2011
|
Kenya Standard – Self-ballasted LED-lamps for general lighting services – Safety specifications
|
KS IEC 61215:2005
|
Kenya Standard – Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification type approval
|
KS IEC 60891:2009
|
Kenya Standard – Photovoltaic devices – Procedures for temperature and irradiance corrections to measures I-V characteristics
|
KS IEC 60904-4:2009
|
Kenya Standard – Photovoltaic devices Part 4: Reference solar devices – Procedure for establishing calibration traceability
|
KS IEC 60904-5:2011
|
Kenya Standard – Photovoltaic devices Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
|
KS IEC 60904-10:2009
|
Kenya Standard – Photovoltaic devices Part 10: Methods of linearity measurement
|
KS IEC 61400-22:2010
|
Kenya Standard – Wind turbines Part 22: Conformity testing and certification
|
KS IEC 61400-24:2010
|
Kenya Standard – Wind turbines Part 24: Lightning protection
|
KS IEC/TS 62257-7:2010
|
Kenya Standard – Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-1: Generators -Photovoltaic generators
|
KS IEC 62109-2:2011
|
Kenya Standard – Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters
|
KS IEC 62253:2011
|
Kenya Standard – Photovoltaic pumping systems – Design qualification and performance measurements
|
KS 1673-1:2004
|
Kenya Standard – Solar photovoltaic power systems – Design, installation, operation, monitoring and maintenance – Code of Practice Part 1: General PV system requirements
|
KS 1673-2-2:2003
|
Kenya Standard – Generic specification for solar photovoltaic systems – System design, installation, operation, monitoring and maintenance Part 2: Test procedures for main components Section 2: Recommended practices for installation, maintenance, testing and replacements of secondary batteries for use with standalone power systems
|
KS 1673-2-5:2003
|
Kenya Standard – Generic specification for solar photovoltaic systems – System design, installation, operation, monitoring and maintenance Part 2: Test procedures for main components Section 5: Test procedures for luminaires
|
KS IEC 61439-1:2011
|
Kenya Standard – Low-voltage switchgear and control gear assemblies Part 1: General rules
|
KS IEC 61439-2:2011
|
Kenya Standard – Low-voltage switchgear and control gear assemblies Part 2: Power switchgear and control gear assemblies
|
KS IEC 60269-6:2010
|
Kenya Standard – Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of photovoltaic energy systems
|
KS IEC 62006:2010
|
Kenya Standard – Hydraulic machines – Acceptance tests of small hydroelectric installations
|
KS IEC 62256:2008
|
Kenya Standard – Hydraulic turbines, storage pumps and pump turbines – Rehabilitation and performance improvement
|
KS IEC 62907:2009
|
Kenya Standard – Hydraulic machines, radial and axial – Performance conversion method from model prototype
|
KS 1021:1989
|
Kenya Standard – Specification for general purpose steel wire strand
|
KS 188-1:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 1: Physical and electrical requirements
|
KS 188-2: 1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 2: Methods of measurement of thickness and overall dimensions and determinations of mechanical properties
|
KS 188-3:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 3: Thermal ageing methods
|
KS 188-4:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 4: Loss of mass test and thermal stability test
|
KS 188-5:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 5: Pressure test at high temperature and tests for resisting cracking
|
KS 188-6:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 6: Tests at low temperature
|
KS 188-7:1997
|
Kenya Standard – Specification for PVC installations and sheaths of electric cables and cords Part 7: Hot deformation test
|
KS 189:1979
|
Kenya Standard – Specification for aluminium stranded conductors for overhead power lines
|
KS 190-1:1987
|
Kenya Standard – Specification for stranded aluminium conductors steel reinforced and galvanized steel wires for reinforcing aluminium conductors Part 1: Galvanized steel wires for reinforced aluminium conductors
|
KS 190-2:1987
|
Kenya Standard – Specification for stranded aluminium conductors steel reinforced and galvanized steel wires for reinforcing aluminium conductors Part 2: Aluminium conductors steel-reinforced
|
KS 191-1:1987
|
Kenya Standard – Specification for test on electric cables under fore conditions Part 1: Test on single vertical insulated wire or cable
|
KS 191-2:1987
|
Kenya Standard – Specification for test on electric cables under fore conditions Part 2: Test on bunched insulated wires and cables
|
KS 192:1987
|
Kenya Standard – Specification for PVC insulated flexible cables and cords of rated voltage up to and including 450/750 V
|
KS 468-1:1987
|
Kenya Standard – Specification for flexible PVC conduits for electric wiring Part 1: Plain conduits
|
KS 468-2:1990
|
Specification for flexible PVC conduits for electric wiring Part 2: Corrugated conduits
|
KS 188-6:1997
|
Kenya Standard – Specification for PVC insulations and sheaths of electric cables and cords Part 6: Tests at low temperature
|
KS 1023:1989
|
Kenya Standard – Specification for aluminium drawing stock for electrical purposes
|
KS 1109:1991
|
Kenya Standard – Specification for earthling lamps
|
KS 1110:1991
|
Kenya Standard – Standard for classification of electrical and electronic equipment with regard to protection against electric shock
|
KS 196:1979
|
Kenya Standard – Preferred values for resistors and capacitors
|
KS 197:1979
|
Kenya Standard – Marking codes for resistors and capacitors
|
KS 236:1982
|
Kenya Standard – Specification for refrigerators and freezers
|
KS 237:1982
|
Kenya Standard – Specification for household electric ranges
|
KS 239:1996
|
Kenya Standard – Specification for safety requirements for domestic and similar electrical appliances
|
KS 464:1998
|
Kenya Standard – Specification for tubular fluorescent lamps
|
KS 465:1982
|
Kenya Standard – Specification for electric soldering irons
|
KS 466:1982
|
Kenya Standard – Specification for electric food preparation machines
|
KS 1814:2018
|
Kenya Standard – Biomass stoves – Specification, Second Edition
|
KS ISO 13063:2012
|
Kenya Standard – Electrically propelled mopeds and motorcycles – Safety specifications, Firs Edition
|
KS 9-4:2018
|
Kenya Standard – Gas cylinders – Refillable welded low carbon steel cylinders for liquefied petroleum gas (LPG) exceeding 1.5 litres water capacity Part 4: Requalification and inspection, Third Edition
|
KS EAS 188:1997
|
Kenya Standard – Machetes – Specification
|
KS 151:2006
|
Kenya Standard – Panga – Specification
|
KS EAS 360:2004
|
Kenya Standard – Pneumatic tyres for agriculture implements
|
KS EAS 132:1999
|
Kenya Standard – Hoes (jembes) – Both plain and forked – Specification
|
KS 815:2018
|
Kenya Standard – Portable retro-reflective warning triangles – Specification, Third Edition
|
KS 2725:2018
|
Kenya Standard – Road vehicles -Homologation of motor vehicle models – Requirements, First Edition
|
KS 2726:2018
|
Kenya Standard – Road vehicles – Windscreen wiping system for passenger vehicles – Requirements, First Edition
|
KS 2727:2018
|
Kenya Standard – Road vehicles – Wheel fasteners and hub caps – Requirements, First Edition
|
KS 2728:2018
|
Kenya Standard – Road vehicles – Steering systems – Requirements, First Edition
|
KS 2733:2018
|
Kenya Standard – Road vehicles – Interior fittings – Specification, First Edition
|
KS 2735:2018
|
Kenya Standard – Road vehicles – External projections – Specification, First Edition
|
KS 2738:2018
|
Kenya Standard – Road vehicles – Locking systems and door retention components – Requirements, First Edition
|
KS 2740:201
|
Kenya Standard – Road vehicles – Lamps (bulbs) – Requirements, First Edition
|
KS 2741:2018
|
Kenya Standard – Road vehicles – Headlights – Requirements, First Edition
|
KS ISO 11296-1:2009
|
Kenya Standard – Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 1: General
|
KS 113344:1999
|
Kenya Standard – Assistive products for walking manipulated by one arm – Requirements and test methods Part 4: Walking sticks with three or more legs
|
KS ISO 11334-1:2007
|
Kenya Standard – Assistive products for walking manipulated by one arm – Requirements and test methods Part 1: Elbow crutches
|
KS ISO 15877-1:2009
|
Kenya Standard – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) Part 1: General
|
KS ISO 15877-2:2009
|
Kenya Standard – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) Part 2: Pipes
|
KS ISO 15877-3:2009
|
Kenya Standard – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) Part 3: Fittings
|
KS ISO 15877-5:2009
|
Kenya Standard – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system
|
KS 320:2007
|
Kenya Standard – Polyvinyl Chloride (PVC) water hoses – Specification
|
KS 2199:2009
|
Kenya Standard – Plastics rainwater piping systems for above-ground external use – Unplasticized poly (vinyl chloride) (PVC-U) – Specification Part 1: Pipes, fittings and the system
|
KS 2349:2012
|
Kenya Standard – Orthosis – Specification
|
KS 476-2:1987
|
Kenya Standard – Uncoated aluminium hollow-ware utensils – Specification Part 2: Uncoated aluminium pans
|
KS 475:2001
|
Kenya Standard – Pressure cookers – Specification
|
KS 460-2:1983
|
Kenya Standard – Uncoated aluminium plate, sheet and strip for hollow-ware cooking utensils – Specification
|
KS 1225:2003
|
Kenya Standard – Vacuum-ware, insulated flasks and jugs for domestic use – Specification
|
KS 1517:2018
|
Kenya Standard – Dairy-based desserts and ice mixes – Specification, Third Edition
|
KS 35:2018
|
Kenya Standard – Dairy cream and prepared creams – Specification, Second Edition
|
KS 941:2018
|
Kenya Standard – Fermented (cultured) milk – Specification, second Edition
|
KS 2784:2018
|
Kenya Standard – Milk fat products – Specification, First Edition
|
KS 2785:2018
|
Kenya Standard – Milk powder and cream powders – Specification, Second Edition
|
KS 435:2018
|
Kenya Standard – Dehydrated vegetables – Specification, Second Edition
|
KS 2786:2018
|
Kenya Standard – Dried fruits – Specification, First Edition
|
KS 2580:2018
|
Kenya Standard – Fruit juice dairy blends – Specification, Second Edition
|
KS 139:2018
|
Kenya Standard – Jams, jellies and marmalades – Specification, Second Edition
|
KS 1179:2018
|
Kenya Standard – Canned fruit cocktail – Specification, Second Edition
|
KS 2752:2018
|
Kenya Standard – Processed fruits and vegetables – Code of Practice, First Edition
|
LKS 2779:2018
|
Kenya Standard – Cassava bread – Specification, First Edition
|
KS 2783:2018
|
Kenya Standard – Warehousing and storage of roots and tubers – Code of Practice, First Edition
|
KS 2754:2018
|
Kenya Standard – Cereals and pulses – Code of Practice, First Edition
|
KS 2788:2018
|
Kenya Standard – Virgin coconut oil – Specification, First Edition
|
KS 28-5:2018
|
Kenya Standard – Cottage cheese – Specification, Third Edition
|
KS 28-6:2018
|
Kenya Standard – Cream cheese – Specification, Third Edition
|
KS 2193:2018
|
Kenya Standard – Mozzarella cheese – Specification, Third Edition
|
KS 2787:2018
|
Kenya Standard – Group standard for un-ripened cheeses including fresh cheeses – Specification, FirstEdition
|
KS 1773:2013
|
Kenya Standard – Water-based flavoured drink in solid – Specification, Third Edition
|
KS 1485:2018
|
Kenya Standard – Water-based flavoured drink – Specification, Third Edition
|
KS 2772:2018
|
Kenya Standard – Basic requirements for a slaughterhouse – Specification, First Edition
|
KS 1093:2018
|
Kenya Standard – Cardamom powder – Specification, Third Edition
|
KS 871:2018
|
Kenya Standard – Compounded trout fish feeds – Specification, Second Edition
|
KS CAC/MRL 2:2017
|
Kenya Standard – Maximum Residue Limits (MRLs) and risk management recommendations (RMRs) for residues of veterinary drugs in foods, First Edition
|
KS 2366:2018
|
Kenya Standard – Coffee industry – Code of Practice
|
KS 2469:2013
|
Kenya Standard – Flavoured black tea – Specification
|
KS 1927:2012
|
Kenya Standard – Tea packets and containers – Specification
|
KS ISO 9884-1:1994
|
Kenya Standard – Tea sacks – Specification Part 1: Reference sack for palletised and containerised transport of tea
|
KS ISO 9884-2:1999
|
Kenya Standard – Tea sacks – Specification Part 2: Performance specification for sacks for palletised and containerised transport of tea
|
KS EAS 29: 2000
|
Kenya Standard – Carbonated (beverages) soft drinks – Specification
|
KS EAS 149:2000
|
Kenya Standard – Carbon dioxide for beverage industry – Specification
|
KS 1829:2004
|
Kenya Standard – Labelling of products – General requirements
|
KS 1742:2013
|
Kenya Standard – Horse feed supplement – Specification
|
KS CAC/GL 80:2013
|
Kenya Standard – Guidelines on the assessment of risk for feed
|
KS 943:2013
|
Kenya Standard – Meat meal for compounding animal feed – Specification
|
KS 838:2013
|
Kenya Standard – Meat and bone meal for compounding animal feeds – Specification
|
KS ISO 17604:2003
|
Kenya Standard – Carcass sampling for microbiological analysis Amendment 1: Sampling of poultry carcasses
|
KS 2375:2012
|
Kenya Standard – Sodium tetra borate (borax) fertiliser – Specification
|
KS 2376:2012
|
Kenya Standard – Copper sulphate (pentahydrate) fertiliser – Specification
|
KS 2377:2012
|
Kenya Standard – Ferrous sulphate (heptahydrate) fertiliser – Specification
|
KS 2378:2012
|
Kenya Standard – Manganese sulphate (monohydrate) fertiliser – Specification
|
KS 2379:2012
|
Kenya Standard – Sodium molybate (dihydrate) fertiliser – Specification
|
KS EAS 4:2013
|
Kenya Standard – Infant formula – Specification
|
KS EAS 798:2013
|
Kenya Standard – Lipid food supplement – Specification
|
KS 2514:2013
|
Kenya Standard – Micronutrient powder – Specification
|
KS EAS 799:2013
|
Kenya Standard – Edible full fat soya flour – Specification
|
KS 998:2008
|
Kenya Standard – Specification for chocolates
|
KS 1792-2:2013
|
Kenya Standard – Malt-based cocoa products – Specification Part 1: Granulated products
|
KS CODEX STAN 147:1985
|
Kenya Standard – Kenya Codex Standard for cocoa butter confectionery
|
KS 436-1:2013
|
Kenya Standard – Cocoa powder – Specification part 1: Unsweetened cocoa powder
|
KS EAS 12:2018
|
Kenya Standard – Potable Water – Specification, Second Edition
|
KS EAS 13:2018
|
Kenya Standard – Packaged mineral waters – Specification, Second Edition
|
KS EAS 153:2018
|
Kenya Standard – Packaged drinking water – Specification, Second Edition
|
KS EAS 109:2018
|
Kenya Standard – Potable spirit – Specification, Third Edition
|
KS EAS 139:2018
|
Kenya Standard – Fortified wine – Specification, Third Edition
|
KS EAS 140:2018
|
Kenya Standard – Sparkling wine – Specification, Third Edition
|
KS EAS 141:2018
|
Kenya Standard – Whisky – Specification, Third Edition
|
KS EAS 142:2018
|
Kenya Standard – Vodka – Specification, Third Edition
|
KS EAS 143:2018
|
Kenya Standard – Brandy – Specification, Third Edition
|
KS EAS 144:2018
|
Kenya Standard – Neutral spirit – Specification, Third Edition
|
KS EAS 145:2018
|
Kenya Standard – Gin – Specification, Third Edition
|
KS EAS 146:2018
|
Kenya Standard – Rum – Specification, Third Edition
|
KS 2775:2018
|
Kenya Standard – Labelling of complementary foods and designated products – Requirements, First Edition
|
KS 317-4:2018
|
Kenya Standard – Carcasses and meat cuts – Specification Part 4: Camel, First Edition
|
KS 2761:2018
|
Kenya Standard – Meat hygiene – Code of Practice, First Edition
|
KS 2762:2018
|
Kenya Standard – Offal – Specification, First Edition
|
KS 2774-1:2018
|
Kenya Standard – Grading live animal for meat trade – Specification Part 1: Cattle, First Edition
|
KS 2774-2:2018
|
Kenya Standard – Grading live animal for meat trade – Specification Part 2: Goat, First Edition
|
KS 2774-3:2018
|
Kenya Standard – Grading live animal for meat trade – Specification Part 3: Sheep, First Edition
|
KS 2774-4:2018
|
Kenya Standard – Grading live animal for meat trade – Specification Part 4: Camel, First Edition
|
KS 2430:2018
|
Kenya Standard – Ginger paste – Specification, Second Edition
|
KS 2431:2018
|
Kenya Standard – Garlic paste – Specification, Second Edition
|
KS 2432:2018
|
Kenya Standard – Garam masala – Specification, Second Edition
|
KS 2131:2018
|
Kenya Standard – Tamarind paste – Specification, Second Edition
|
KS ISO 927:2012
|
Kenya Standard – Spices and condiments – Determination of extraneous matter and foreign matter content, First Edition
|
KS 2782:2018
|
Kenya Standard – In shell pistachio nuts – Specification, First Edition
|
KS 1284:2018
|
Kenya Standard – Artificial vinegar – Specification, Third Edition
|
KS 2756:2018
|
Kenya Standard – Packaged flavoured drinking water – Specification, First Edition
|
KS 2308:2012
|
Kenya Standard – Specification for soup stock medium (beef)
|
KS 2310:2012
|
Kenya Standard – Specification for edible meat co- products
|
KS EAS 782:2012
|
Kenya Standard – Composite flour – Specification
|
KS EAS 778:2012
|
Kenya Standard – Fresh bitter cassava – Specification
|
KS EAS 780:2012
|
Kenya Standard – Fresh cassava leaves – Specification
|
KS EAS 771:2012
|
Kenya Standard – Fresh sweet potatoes – Specification
|
KS EAS 776:2012
|
Kenya Standard – Production and handling of fresh cassava – Code of Practice
|
KS 775:2012
|
Kenya Standard – Production and handling of fresh ware potatoes – Code of Practice
|
KS 777:2012
|
Kenya Standard – Reduction of acrylamide in potato products – Code of Practice
|
KS 779:2012
|
Kenya Standard – High quality cassava flour – Specification
|
KS 2225:2012
|
Kenya Standard – Genetically modified organisms and derived products – Labelling of food and feed
|
KS EAS 130:1999
|
Kenya Standard – Green coffee bean – Specification
|
KS ISO 6670:2002
|
Kenya Standard – Instant coffee – Sampling method for bulk units with liners
|
KS EAS 105:2008
|
Kenya Standard – Roasted coffee beans and roasted ground coffee – Specification
|
KS 2797:2018
|
Kenya Standard – Potassium permanganate – Specification, First Edition
|
KS 1408-1:2018
|
Kenya Standard – Technical grade – Specification Part 1 – Dimethoate, Second Edition
|
KS 604:2018
|
Kenya Standard – Stencil papers – Specification, Second Edition
|
KS 2384:2018
|
Kenya Standard – Transport of dangerous goods by road – Operational requirements, Second Edition
|
KS 2382-4:2018
|
Kenya Standard – Transport of dangerous goods – Emergency information systems Part 4: Transport emergency card, Second Edition
|
KS ISO 6141:2015
|
Kenya Standard – Gas analysis – Content of certificates for calibration gas mixtures, First Edition
|
KS ISO 21809-1:2011
|
Kenya Standard – Petroleum and natural gas industries – External coatings for buried or submerged pipelines use din pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP), First Edition
|
KS ISO 21809-2:2014
|
Kenya Standard – Petroleum and natural gas industries – External coatings for buried or submerged pipelines use din pipeline transportation systems Part 2: Single layer fusion-bonded epoxy coatings, First Edition
|
KS ISO 21809-3:2016
|
Kenya Standard – Petroleum and natural gas industries – External coatings for buried or submerged pipelines use din pipeline transportation systems Part 3: Field joint coatings, First Edition
|
KS ISO 21809-4:2009
|
Kenya Standard – Petroleum and natural gas industries – External coatings for buried or submerged pipelines use din pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE), First Edition
|
KS ISO 21809-5:2017
|
Kenya Standard – Petroleum and natural gas industries – External coatings for buried or submerged pipelines use din pipeline transportation systems Part 5: External concrete coatings, First Edition
|
KS ISO16961:2015
|
Kenya Standard – Petroleum, petrochemical and natural gas industries – Internal coating and lining of steel storage tanks, First Edition
|
KS ISO 18797-1:2016
|
Kenya Standard – Petroleum, petrochemical and natural gas industries – External corrosion protection on risers by coatings and linings Part 1: Elastomeric coating systems-polychloroprene or EPDM, First Edition
|
KS ISO 15156-1:2015
|
Kenya Standard – Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials, First Edition
|
KS ISO 15156-2:2015
|
Kenya Standard – Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons, First Edition
|
KS ISO 15156-3:2015
|
Kenya Standard – Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production Part 3 -Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys, First Edition
|
KS ISO 12757-1:2017
|
Kenya Standard – Ballpoint pens and refills Part 1: General use, First Edition
|
KS ISO 12757-2:1998
|
Kenya Standard – Ballpoint pens and refills Part 2: Documentary use, First Edition
|
KS ISO 27668-1:2017
|
Kenya Standard – Gel ink ball pens and refills Part 1: General use, First Edition
|
KS ISO 14145-1:2017
|
Kenya Standard – Roller ball pens and refills Part 2: General use, First Edition
|
KS ISO 14145-2:1998
|
Kenya Standard – Roller ball pens and refills Part 2: Documentary use (DOC), First Edition
|
KS ISO 9957-3:1997
|
Kenya Standard – Fluid draughting media Part 3: Water- based coloured draughting inks – Requirements and test conditions, First Edition
|
KS EAS 877:2017
|
Kenya Standard – Bathing bar – Specification, First Edition
|
KS EAS 878:2017
|
Kenya Standard – Antibacterial bathing bar – Specification, First Edition
|
KS 1998:2007
|
Kenya Standard – Marking pens for writing ad drawing – Specification
|
KS EAS 751:2010
|
Kenya Standard – Air quality – Specification
|
KS EAS 752:2010
|
Kenya Standard – Air quality – Tolerance limits of emissions discharged to the air by factories
|
KS ISO 12040:1997
|
Kenya Standard – Graphic technology – Prints and printing inks assessment of light fastness using filtered xenon arc light
|
KS 2407:2012
|
Kenya Standard – Swimming pools water – Quality tolerance
|
KS EAS 177:2012
|
Kenya Standard – Automotive gas oil (automotive diesel) – Specification 3
|
KS EAS 158:2012
|
Kenya Standard – Automotive gas oil (premium motor spirit) – Specification
|
KS ISO 7391-1:2006
|
Kenya Standard – Plastics – Polycarbonate (PC) molding and extrusion materials – Part 1: Designation system and basis for specifications
|
KS ISO 7391-2:2006
|
Kenya Standard – Plastics – Polycarbonate (PC) molding and extrusion materials – Part 2: Preparation oftest specimens and determination of properties
|
KS ISO 11833-1:2007
|
Kenya Standard – Plastics – Unplasticised poly (vinyl chloride) sheets – Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm
|
KS 2361:2012
|
Kenya Standard – Positive list of constituents of polystyrene (crystal and high impact) in contact with foodstuffs, pharmaceuticals and drinking water
|
KS 2359:2012
|
Kenya Standard – Polystyrene (crystal and high impact) for its safe use in contact with foodstuffs, pharmaceuticals and drinking water – Specification
|
KS 2360:2012
|
Kenya Standard – Positive list of constituents of polyalkylene tetrepthalates (PET and PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water
|
KS 2387:2012
|
Kenya Standard – Polyalkylene tetrepthalates (PET and PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water – Specification
|
KS 807-2:2010
|
Kenya Standard – Polishes – Specification Part 2: Floor polish solvent type (liquid and paste)
|
KS 807-4:2010
|
Kenya Standard – Polishes – Specification Part 4: Floor polish, water emulsion self-shining type
|
KS 807-5:1997
|
Kenya Standard – Specification for polishes Part 5: Floor polish pigmented paste type
|
KS 807-6:1996
|
Kenya Standard – Specification for polishes Part 6: Automobile polish, wax solvent paste type
|
KS 807-7:1997
|
Kenya Standard – Specification for polishes Part 7: Wooden furniture polish paste
|
KS EAS 290-2:2002
|
Kenya Standard – Polishes – Specification Part 2: floor polish solvent type (liquid and paste)
|
KS EAS 290-3:2002
|
Kenya Standard – Polishes – Specification Part 3: Floor polish water/emulsion buffable type
|
KS EAS 462:2007
|
Kenya Standard – Shoe polish wax solvent paste type – Specification
|
KS 647:2010
|
Kenya Standard – Industrial oxygen – Specification
|
KS 1267-2:2011
|
Kenya Standard – Pillows for domestic use Part 2: Synthetic fibre-filled
|
KS 1267-3:2011
|
Kenya Standard – Pillows for domestic use Part 3: Plumage-filled
|
KS EAS 355:2017
|
Kenya Standard – Toilet paper – Specification, Second Edition
|
KS EAS 858:2017
|
Kenya Standard – Base paper for carbon paper – Specification, First Edition
|
KS EAS 859:2017
|
Kenya Standard – Paper bags – Specification, First Edition
|
KS EAS 860:2017
|
Kenya Standard – Base paper for waxed bread wrap – Specification, First Edition
|
KS EAS 861:2017
|
Kenya Standard – Paper serviettes (napkins) – Specification, First Edition
|
KS EAS 862:2017
|
Kenya Standard – Facial tissue paper – Specification, First Edition
|
KS EAS 863:2017
|
Kenya Standard – Paper and board – Cut-size for general purpose – Specification, First Edition
|
KS EAS 864:2017
|
Kenya Standard – Photocopy paper – Specification, First Edition
|
KS EAS 865:2017
|
Kenya Standard – Corrugated fibre board boxes for general packaging – Specification, First Edition
|
KS EAS 866:2017
|
Kenya Standard – Paper sacks for packaging of cement – Specification, First Edition
|
KS EAS 867:2017
|
Kenya Standard – Waxed paper for bread wrap – Specification, First Edition
|
KS EAS 868:2017
|
Kenya Standard – Natural and extensible sack kraft paper – Specification, First Edition
|
KS 869:2017
|
Kenya Standard – Wrapping paper – Specification, First Edition
|
KS 2443-2:2018
|
Kenya Standard – Fireworks – Specification and test methods Part 2: Roman candles, First Edition
|
KS 2790:2018
|
Kenya Standard – Paper used for maps and architectural drawings – Specifications, First Edition
|
KS EAS 868:2016
|
Kenya Standard – Water-thinned priming paints for wood – Specification, First Edition
|
KS EAS 849:2016
|
Kenya Standard – Silk (sheen) emulsion paint for interior use – Specification, First Edition
|
KS EAS 850:2016
|
Kenya Standard – Matt solvent-borne paint for interior and exterior use – Specification, First Edition
|
KS EAS 851:2016
|
Kenya Standard – Matt emulsion paint for interior and exterior use – Specification, First Edition
|
KS EAS 852:2016
|
Kenya Standard – Air-dried roofing paint – Specification, First Edition
|
KS EAS 853-1:2016
|
Kenya Standard – Auto-refinishing paint – Specification Part 1: Synthetic resin-based, First Edition
|
KS EAS 853-2:2016
|
Kenya Standard – Auto-refinishing paint – Specification Part 2: Nitrocellulose resin-based, First Edition
|
KS EAS 854:2016
|
Kenya Standard – Thinner for nitrocellulose resin-based paints and lacquers – Specification, First Edition
|
KS EAS 855:2016
|
Kenya Standard – Thinner for synthetic resin-based auto-refinishing paints – Specification, First Edition
|
KS EAS 856:2016
|
Kenya Standard – Pack acrylic resin-based auto- refinishing paint – Specification, First Edition
|
KS EAS 857:2016
|
Kenya Standard – Thinner for acrylic resin-based auto- refinishing paint – Specification, First Edition
|
KS 2157-1:2018
|
Kenya Standard – Hot applied thermoplastic road marking paint – Specification Part 1: Constituent material and mixtures, Second Edition
|
KS 2157-2:2018
|
Kenya Standard – Hot applied thermoplastic road marking paint – Specification Part 2: Specification for road performance, Second Edition
|
KS 421:2018
|
Kenya Standard – Newsprint – Specification, Third Edition
|
KS 291:2018
|
Kenya Standard – Kraft liner – Specification, Second Edition
|
KS ISO 14644-1:2015
|
Kenya Standard – Clean rooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration, First Edition
|
KS ISO 618:1974
|
Kenya Standard – Paper – Articles of stationery that include detachable sheets – Overall trimmed sizes
|
KS 811:2013
|
Kenya Standard – Silk (sheen) emulsion paints for interior and exterior use – Specification
|
KS 2351:2012
|
Kenya Standard – Surgical spirit – Specification
|
KS 924:2012
|
Kenya Standard – Specification for motor vehicle chevrons, decals and strips
|
KS 2350:2012
|
Kenya Standard – Sodium silicate – Specification
|
KS 87:2012
|
Kenya Standard – Hydrochloric acid – Specification
|
KS 1180:2012
|
Kenya Standard – Ethyl methyl ketone (butanone for industrial use) – Specification
|
KS 577:2018
|
Kenya Standard – Hair shampoo, synthetic detergent- based – Specification, Fourth Edition
|
KS 1764:2018
|
Kenya Standard – Deodorants and antiperspirants – Specification, Third Edition
|
KS EAS 335:2013
|
Kenya Standard – Cologne – Specification
|
KS EAS 336:2013
|
Kenya Standard – Chemical depilatories – Specification
|
KS EAS 337:2013
|
Kenya Standard – Henna powder – Specification
|
KS EAS 338:2013
|
Kenya Standard – Chemical hair relaxers and hair waving products – Specification
|
KS EAS 339:2013
|
Kenya Standard – Hair creams, lotions and gels –Specification
|
KS EAS 340:2013
|
Kenya Standard – Nail polish – Specification
|
KS EAS 341:2013
|
Kenya Standard – Nail polish removers – Specification
|
KS EAS 342:2013
|
Kenya Standard – Pomades and solid brilliantines – Specification
|
KS EAS 346:2013
|
Kenya Standard – Labelling of cosmetics – General requirements
|
KS EAS 461-1:2013
|
Kenya Standard – Hair dyes Part 1: Aryl diamine based formulated powders – Specification
|
KS EAS 126:1999
|
Kenya Standard – Pure petroleum jelly for cosmetic industry – Specification
|
KS 799:1989
|
Kenya Standard – Specification for castor oil for cosmetic industry
|
KS 917:2000
|
Kenya Standard – Specification for aftershave preparations Part 1: Lotions
|
KS 1473:1998
|
Kenya Standard – Specification for lipstick
|
KS 1669:2001
|
Kenya Standard Specification for cosmetic and air freshener aerosols
|
KS 1766:2006
|
Kenya Standard – Specification for body oils
|
KS 1768:2003
|
Kenya Standard – Specification for talc for cosmetic industry
|
KS EAS 377-1:2013
|
Kenya Standard – Cosmetic and cosmetic products Part 1: List of substances prohibited in cosmetic products
|
KS EAS 377-2:2013
|
Kenya Standard – Cosmetic and cosmetic products Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
|
KS EAS 377-3:2013
|
Kenya Standard – Cosmetic and cosmetic products Part 3: List of colorants allowed in cosmetic products
|
KS EAS 377-4:2013
|
Kenya Standard – Cosmetic and cosmetic products Part 4: List of preservatives allowed in cosmetic products
|
KS EAS 377-5:2013
|
Kenya Standard – Cosmetic and cosmetic products Part 5: Use of UV filters in cosmetic products
|
KS 915:1990
|
Kenya Standard – Specification for anhydrous lanolin for cosmetic industry
|
KS 1769-1:2005
|
Kenya Standard – Glycerine Part 1: Soap lye crude glycerine – Specification
|
KS 1769-2:2005
|
Kenya Standard – Glycerine Part 2: Saponification (hydrolyser) crude glycerine – Specification
|
KS 1769-3:2005
|
Kenya Standard – Glycerine Part 3: Analytical reagent (AR) glycerine – Specification
|
KS 1769-4:2005
|
Kenya Standard – Glycerine Part 4: Chemically pure (CP) glycerine – Specification
|
KS 1769-5:2005
|
Kenya Standard – Glycerine Part 5: Industrial white (IW) glycerine - Specification
|
KS 1769-6:2005
|
Kenya Standard – Glycerine Part 6: Technical (TECH) glycerine – Specification
|
KS 1769-7:2005
|
Kenya Standard – Glycerine Part 7: Dynamite grade (DYN) glycerine – Specification
|
KS ISO 3053:2004
|
Kenya Standard – Oil of grapefruit (Citrus x paradise macfad.), obtained by expression
|
KS ISO 770:1980
|
Kenya Standard – Oil of eucalyptus globulus
|
KS ISO 3515:2002
|
Kenya Standard – Oil of lavender (Lavandula angustifolia mill.)
|
KS ISO 3217:1974
|
Kenya Standard – Oil of lemongrass (Cymbopogon citratus)
|
KS ISO 4718:1981
|
Kenya Standard – Oil of lemongrass (Cymbopogon flexuosus)
|
KS ISO 3519:2005
|
Kenya Standard – Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) swingle]
|
KS ISO 3809:1987
|
Kenya Standard – Oil of lime, Mexico [Citrus aurantifolia (Christmann) swingle]
|
KS ISO 3214:2000
|
Kenya Standard – Oil of Litsea cubeba (Litsea cubeba Pers.)
|
KS ISO 4716:1987
|
Kenya Standard – Oil of vetiver [Vetiveria zizanioides (Linneaeus) Nash]
|
KS ISO 3528:1997
|
Kenya Standard – Oil of mandarin, Italian type (Citrusreticulata Blanco)
|
KS ISO 3517:1975
|
Kenya Standard – Oil of neroli
|
KS ISO 3527:2000
|
Kenya Standard – Oil of parsley fruit (Petroselinum sativum Hoffm.)
|
KS ISO 3757:1978
|
Kenya Standard – Oil of patchouli
|
KS ISO 3714:1980
|
Kenya Standard – Oil of pennyroyal
|
KS ISO 3526:1991
|
Kenya Standard – Oil of sage (Salvia lavandulifolia)
|
KS ISO 3518:2002
|
Kenya Standard – Oil of sandalwood (Santalum album L.)
|
KS ISO 4719:1999
|
Kenya Standard – Oil of spike lavender [Lavandula latifolia (l.f.) Medikus], Spanish type
|
KS ISO 3140:2005
|
Kenya Standard – Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment
|
KS ISO 3063:2004
|
Kenya Standard – Oil of ylang: ylang [Cananga odorata (Lam.) Hook f. et Thomson forma genuine]
|
KS 1731:2015
|
Kenya Standard – Footwear – Children’s shoes (2 years and below) – Specification – To be replaced by KS 1731:2018
|
KS 1732:2015
|
Kenya Standard – Footwear – Children’s shoes (above 2 years to 6 years) – Specification – To be replaced by KS 1732:2018
|
KS ISO 2417:2002
|
Kenya Standard – Leather – Physical and mechanical tests – Determination of the static absorption of water – To be replaced by LS ISO 2417:2016
|
KS EAS 64:2017
|
Kenya Standard – Groundnut (peanut) oil for cosmetic industry – Specification, Second Edition
|
KS EAS 65:2017
|
Kenya Standard – Coconut for cosmetic industry – Specification
|
KS EAS 86:2017
|
Kenya Standard – Sesame (simsim) oil for cosmetic industry – Specification, Second Edition
|
KS EAS 425-1:2017
|
Kenya Standard – Skin powders – Specification part 1: Body and face powder, Second Edition
|
KS EAS 425-2:2017
|
Kenya Standard – Skin powders – Specification Part 2: Bbay powder, Second Edition
|
KS EAS 835-1:2017
|
Kenya Standard – Bath preparations Part 1: Synthetic detergent-based foam baths and shower gels – Specification, Second Edition
|
KS EAS 837:2017
|
Kenya Standard – Avocado oil for cosmetic industry – Specification, Second Edition
|
KS EAS 840:2017
|
Kenya Standard – Shaving cream – Specification, Second Edition
|
KS EAS 841:2017
|
Kenya Standard – Hair oils – Specification, Second Edition
|
KS EAS 842-1:2017
|
Kenya Standard – Hair shampoo Part 1: Soap-based – Specification, Second Edition
|
KS EAS 844:2017
|
Kenya Standard – Aryl dia-amine-based liquid oxidation hair dyes – Specification, Second Edition
|
KS EAS 845:2017
|
Kenya Standard – Cosmetic pencils – Specification, Second Edition
|
KS EAS 18-1:2016
|
Kenya Standard – Cement Part 1: Composition, specific conformity criteria for common cement, Second Edition
|
KS EAS 18-2:2016
|
Kenya Standard – Cement Part 2: Conformity evaluation, Second Edition
|
KS ISO 10714:1992
|
Kenya Standard – Steel and iron – Determination of phosphorus content – Phosphovanadomolybdate Spectrophotometric method, First Edition
|
KS EAS 18-1:2016
|
Kenya Standard – Cement Part 1: Composition, specification and conformity criteria for common cement, Second Edition
|
KS EAS 18-2:2016
|
Kenya Standard – Cement Part 2: Conformity evaluation, Second Edition
|
KS EAS 148-1:2016
|
Kenya Standard – Cement – Test methods Part 1: Determination of strength, Second Edition
|
KS EAS 148-2:2016
|
Kenya Standard – Cement – Test methods Part 2: Chemical analysis, Second Edition
|
KS EAS 148-3:2016
|
Kenya Standard – Cement – Test methods Part 3: Determination of setting times and soundness, Second Edition
|
KS EAS 148-4:2016
|
Kenya Standard – Cement – Test methods Part 4: Quantitative determination of constituents, Second Edition
|
KS EAS 148-5:2016
|
Kenya Standard – Cement – Test methods Part 5: Pozzolanicity test for pozzolanic cements, Second Edition
|
KS EAS 148-6:2016
|
Kenya Standard – Cement – Test methods Part 6: Determination of fineness, Second Edition
|
KS EAS 148-7:2017
|
Kenya Standard – Cement – Test methods Part 7: Methods of taking and preparing samples, Second Edition
|
KS EAS 148-8:2016
|
Kenya Standard – Cement – Test methods Part 8: Heat of hydration – Solution method, Second Edition
|
KS 1555-1:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 1: Definitions,classification, general principles of design, performance requirements and test methods, First Edition
|
KS 1555-2:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron, First Edition
|
KS 1555-3:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 3: Gully tops and manhole tops made of steel or aluminium alloys, First Edition
|
KS 1555-4:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 4: Gully tops and manhole tops made of steel-reinforced concrete, First Edition
|
KS 1555-5:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 5: Gully tops and manhole tops made of composite materials
|
KS 1555-6:2018
|
Kenya Standard – Gully tops and manhole tops for vehicular and pedestrian areas Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized polyvinyl chloride, First Edition
|
KS ISO 10426-2:2003
|
Kenya Standard – Petroleum and natural gas industries – Cements and materials for well cementing Part 2: Testing of well cements, First Edition
|
KS ISO 10426-3:2003
|
Kenya Standard – Petroleum and natural gas industries – Cements and materials for well cementing Part 3: Testing of deep water well cement formulations, First Edition
|
KS ISO 10426-5:2004
|
Kenya Standard – Shrinkage and expansion of well cement, First Edition
|
KS ISO 2301:1973
|
Kenya Standard – Sawn timber of broadleaved species – Defects measurement, First Edition
|
KS ISO 13061-10:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 10: Determination of impact bending strength, First Edition
|
KS ISO 13061-11:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 11: Determination of resistance to impact indentation, First Edition
|
KS ISO 13061-12:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 12: Determination of static hardness, First Edition
|
KS ISO 13061-13:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 13: Determination of radial and tangential shrinkage, First Edition
|
KS ISO 13061-14:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 14: Determination of volumetric shrinkage, First Edition
|
KS ISO 13061-15:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 15: Determination of radial and tangential swelling, First Edition
|
KS ISO 13061-16:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 16: Determination of volumetric swelling, First Edition
|
KS ISO 13061-17:2017
|
Kenya Standard – Physical and mechanical properties of wood – Test methods for small clear wood specimens Part 17: Determination of ultimate stress in compression parallel to grain, First Edition
|
KS 445: 2018
|
Kenya Standard – Hot rolled steel sections for windows, doors and ventilators – Specification, Second Edition
|
KS 1608:2018
|
Kenya Standard – Wooden fence posts – Specification, Second Edition
|
KS 2776:2018
|
Kenya Standard – Standard for inspection and supplemental treatment of treated wooden utility poles, First Edition
|
KS 1804-5:2018
|
Kenya Standard – Wood preservatives Part 5: Field test method for determining the relative protective effect of a wood preservative on wood in contact with the soil, Second Edition
|
KS 2798:2018
|
Kenya Standard – Building design and erection using prefabricated concrete – Code of Practice, First Edition
|
KS 2789:2018
|
Kenya Standard – Composite pultrusion pole for power, lighting and telecom purposes – Specification, First Edition
|
KS 2802-2:2018
|
Kenya Standard – Masonry units – Test methods Part 2: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing, First Edition
|
KS 2802-4:2018
|
Kenya Standard – Masonry units – Test methods Part 4: Determination of water absorption of clay masonry damp proof course units by boiling in water, First Edition
|
KS 2802-5:2018
|
Kenya Standard – Masonry units – Test methods Part 5: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling, First Edition
|
KS 2802-7:2018
|
Kenya Standard – Masonry units – Test methods Part 7: Determination of net and gross dry density of masonry units (except for natural stone), First Edition
|
KS ISO 12572:2016
|
Kenya Standard – Hygrothermal performance of building materials and products – Determination ofwater vapour transmission properties – Cup method, First Edition
|
KS ISO 1920-1:2004
|
Kenya Standard – Testing of concrete Part 1: Sampling of fresh concrete, First Edition
|
KS ISO 1920-2:2016
|
Kenya Standard – Testing of concrete Part 2: Properties of fresh concrete, First Edition
|
KS ISO 1920-3:2004
|
Kenya Standard – Testing of concrete Part 3: Making and curing test specimens, First Edition
|
KS ISO 1920-4:2005
|
Kenya Standard – Testing of concrete Part 4: Strength of hardened concrete, First Edition
|
KS ISO 1920-5:2018
|
Kenya Standard – Testing of concrete Part 5: Properties of hardened concrete other than strength
|
KS ISO 1920-6:2004
|
Kenya Standard – Testing of concrete Part 6: Sampling, preparing and testing of concrete cores, First Edition
|
KS ISO 1920-7:2004
|
Kenya Standard – Testing of concrete Part 7: Non- destructive tests of unhardened concrete, First Edition
|
KS ISO 1920-9:2009
|
Kenya Standard – Testing of concrete Part 9: Determination of creep of concrete cylinders in compression, First Edition
|
KS ISO 2770-1:2018
|
Kenya Standard – Admixtures of concrete, mortar and grout Part 1: Common requirements, First Edition
|
KS 2770-2:2018
|
Kenya Standard – Admixtures of concrete, mortar and grout Part 2: Concrete admixtures definition, requirements, conformity, marking and labelling – First Edition
|
KS 1933:2018
|
Kenya Standard – Concrete poles for telephone, power and lighting purposes – Specification, Second Edition
|
KS ISO 1248:2006
|
Kenya Standard – Iron oxide pigments – Specifications and methods of test, First Edition
|
KS ISO 2495:2005
|
Kenya Standard – Iron blue pigments – Specifications and method of test, First Edition
|
KS EAS 12:2018
|
Kenya Standard – Potable water – Specification, Second Edition
|
KS EAS 13:2018
|
Kenya Standard – Packaged mineral water – Specification, Second Edition
|
KSEAS 153:2018
|
Kenya Standard – Standard packaged drinking water – Specification, Second Edition
|
KS 2780:2018
|
Kenya Standard – Knitted bags (100% polyethylene) for green tea leaves
|
KS 2795-1:2018
|
Kenya Standard – Motorcycle protective clothing – General requirements, First Edition
|
KS 2781:2018
|
Kenya Standard – Disposal under pad – Specification, First Edition
|
KS 2796:2018
|
Kenya Standard – Disposable nursing pads – Specification, First Edition
|
KS EAS 154:2000
|
Kenya Standard – Baby napkins – Specification, First Edition
|
KS 1731:2018
|
Kenya Standard – Footwear – Children’s shoes (2 years and below)
|
KS 1732:2018
|
Kenya Standard – Footwear – Children’s shoes (above 2 years to 6 years)
|
KS EAS 96-1:2018
|
Kenya Standard – Sanitary towels – Specification Part 1: Disposable
|
KS 638:2018
|
Kenya Standard – Absorbent cotton gauze – Specification, Third Edition
|
KS 2833:2018
|
Kenya Standard – X-ray detectable lap sponge – Specification
|
|